LANSCOERY Acrylic Display Case, 8x6x8 in Clear Display Box with 2mm Panels, White Base, LED String Light Accessory for Model Cars and Building Block Models

I bought this having read the reviews and gave it five stars because I got exactly what I expected. The film is a small nightmare to remove. Put on some music and just expect it to take a bit to get the pieces prepped. Also, having an extra set of gloved hands to help with the assembly is *almost* a must. I pulled all the pieces out, took off the protective coat on the base and placed it where I wanted the final display set up. I then used a combo of my nails and the provided puck to get one corner of the protective film up on each side. It's practically impossible to do with the gloves on. Once I had enough up on all the pieces, I put on the gloves, pulled all the film off and put all the pieces in place. Putting the top on was when i needed help to keep all the pieces lined up and connected properly. If you dont have another person, you could use a rubberband or string to hold the sides together while placing the top. All that said, it would be a nightmare to move once assembled because the little pieces that interlock are not terribly sturdy. So build it on the surface you intend to leave it on. The price is a quarter of what I would have paid for a custom case. So, I'm pleased with the product. And once you take the film off, the sides are crystal clear and look incredible. All in all, it's everything I expected and needed.

** Update ** My 9lb cat has sat on top of the case and it has not (yet) collapsed. So far so good. After reading reviews my expectations were very low. I bought this for a really good price for the size (14 inch cube) because it was labeled as “used”. However, the product did not appear to be used at all, just missing the original packaging. It comes in 6 pieces - 4 sides, a bottom and a top. There is protective film on both sides of each piece. I found the protective film easy to remove using the enclosed round plate. Even wearing the provided gloves, I had no trouble removing the film. I used the round plate to scrape a corner of the film until it lifted enough for me to then pull the entire film off. The round plate also had protective film on each side which I did not bother to peel off and it worked just fine. The case itself isn’t very sturdy but that is to be expected for the price. I got this case to keep our cat out of my daughter’s fairy garden. I have a feeling our cat will try to sit on top of the case and the whole thing will collapse. I may follow another reviewer’s suggestion and use super glue to keep the case together.

Absolute garbage. You have to assembly it yourself and the pieces are poorly 3D cut. They don’t fit perfectly so it’s got a bend and won’t sit flat and mine had broken edges upon opening. This was part of a gift and it’s too late to exchange. Don’t bother, what a waste of $20.

The display case is easy to assemble. Removing the film off the plastic pieces was kind of a challenge. Once peeled off the pieces looked great.

Really wanted to love this, but it just fell flat for me. After taking off the plastic covers, I noticed that there were a couple of dings in some of the pieces, which is disappointing. It also doesn’t feel super sturdy — like, the pieces are all so flimsy — so I wouldn’t recommend putting anything on top of it or putting it under something that could potentially fall on top of it. Not a huge fan of the overhang on the sides. It just looks cheap, in my opinion. Additionally, I ordered the white bottom and received the black instead, so that’s disappointing. As a plus, the instructions were nice and clear, and it didn’t take long to put together. I’ll be keeping it because it will serve its purpose and I don’t know if they’d reuse it since I took the plastic off, but I probably won’t buy from this shop again for display cases.

I bought this for a collection of coral and seashells that mean a lot to me. I wanted something to protect them so they wouldn’t get dusty (it’s impossible to dust coral). The box is kinda hard to put together because it’s just little notches cut out of the plastics that slip into little holes cut out of the plastic on coordinated pieces. With only two hands, it hard to keep the sides you’ve already done together, while you add the other sides. Once together you can’t pick it up and move it without the pieces coming apart so build it where you want it to sit. The sides are also not sealed at all and let air in but still does a fine job of keeping dust out. But the box is hard to clean as it comes apart when you touch it to wipe it off. It would be a much better design if it came with a solid, already built cube and the base. Then you could arrange your stuff on the base and just slip the cube over the top. The base itself is also flimsy. I kept it because it serves the purpose I need it for and I’m not over all unhappy. I was just expecting more sturdiness once put together, for the price. I’ve thought about adding silicone to the edges but I’m afraid I wouldn’t get it on cleanly and make a mess and ruin the box.

I bought this case for my first ever Resin Statue. The case is nearly perfect. The only downsides to the case (for me) is the base of the case should be thicker. It is a little on the flimsy side to be able to move it if need be. I would also include which is the top and bottom for the notches to fit properly. Pros: - Not difficult to put together. - Top is easy to open (plus for me as I use a rechargeable light) - Very nice looking case Cons: - Base plate should be thicker to help with structure if it needs to be moved. - The top and base plate should have a label showing which side is correct for the notches. - Gloves are small for big hands (not a real con just big people issues)

I bought this for my daughter's Howl's Moving Castle puzzle replica... perfect fit, easy to assemble, panels jave excellent clarity, just beautiful, durable, scratch-resistant, brand new condition, and not too heavy.

Excellent produit, facile à assembler. Il faut toutefois faire attention à ne pas ouvrir trop souvent la face supérieure car les ataches se brisent aisément.

great display

I would like to give 0 stars for this item. It doesn't come assembled. One of the sides is completely covered with a stickered on label, and the package comes with a tiny plastic disc to scrape it off with. After about 5 minutes I grabbed some isopropyl alcohol to help loosen it and continued trying to get every scrap of glue and paper residue off, I did this for another 10 minutes. This resulted in scratching the acrylic and permanently marring the item. Worst Amazon purchase of all time, it's in the garbage now, stay away.

The vendor has been very quick and managed the order well. This display box is high quality, also very easy to assemble

Really good quality. I was surprised to have received some LED lights as well. I have my custom lego piece inside of it.