Sunstac 200A 5 in 1 Aluminum MIG Welder 110V/220V Dual Voltage | MIG/Flux Core/Spool Gun/Lift TIG/Stick welder, LCD parameter display, synergic wire-feed control, IGBT inverter platform

Worked perfectly right out of the box. Great welding machine for the price.

Tried the Yeswelder, it was not fun. after returning tried this Sunstac which is very similar but much better in quality, price, and user experience.Side Door is a bit small but not a deal breaker because it DOES fit a 10 lb spool which i was worried about.Metal Drive Roller unit is great for this price point.Screen is easy to see, read, and navigate, even in the sun.Torch/whip/gun handle quality is great.lugs are robust and solid copper.Fan is intermittent which is nice so the machine is only humming when it needs too.When you turn it on it take a few seconds to light up but don't worry this appears to be normal for the Sunstac products (I have them all, mig , acdc tig, plasma. separate machines).I did drop this machine and it was okay. So Build Quality is Reliable for work conditions, still try not to drop it i may have gotten lucky.have not tried stick, so cannot vouch for 6010 but the leads are basic but good.. I have a Lincoln Engine Drive for this..hoping i get some info or a response regarding the plasma cut tips and consumables which i mentioned in another review.wish to do business with you . thank you

At its price point, this is one of the most impressive machines I have used to this day. I’ve been welding for close to 20 years now and this thing lays down when you want it to. I run it as a piggy back machine off of my older miller trailblazer (generator 220v power) and I’ve put about 100 pounds of wire through it so far 10 10# spools in a few weeks time only had it over heat 1 time because it was sitting next to the trailblazer which was throwing off substantial heat. I’ve now relocated and haven’t had that problem since. I ran it nearly maxed out welding 1/2 plate steel to 1/4 plate steel for about 4 hours straight with no issues and excellent penetration. If you are having problems with this machine it’s more than likely user error or wrong settings, do yourself a favor and do some research on proper settings and technique. The plasma cutter on it performs well with light duty cuts but will struggle cutting heavier plates for a long distance. It will cut through 1/4 plate like butter but anything thicker requires a little more attention. The only real flaw I can find with this machine is it is not capable of AC current (tig aluminum) other than that it exceeds performance expectations for anyone looking for a home or garage welder. I use this thing to make money and it’s paid for itself 13 times already in just a few weeks. At that rate I’ll buy one once a month if I have to.

I was surprised by how well this welds. the instructions are less then desirable and hard to understand for those that have never welded before. learning tip, when feeding the wire remove the tip other wise it will not feed through it

This is a great little welder for the price point. I am very impressed and pleased I selected this particular unit. It wasn't easy. I based my decision on feedback and reviews from other buyers. The only complaint I have, and it's pretty significant, is there was nothing on the package to show me how to set up. No instructions whatsoever. Most people buying welders have previous experience but not all. So this was a real bummer. I had to go on the net for help and that was even difficult. Finding this exact model wasn't happening. So I had to use several different postings to get it set up.Besides this oversight I highly recommend the Sunstac 150A welder to anyone looking for a light weight very portable welder that gets the job done!!

First, on arrival, system was and is missing air hose and hose fittings required for plasma cutting.Second, the manual is marginal at best and seems incomplete. For instance, there is a wire drive polarity lead with an exposed contact. The manual indicates how it should be connected for some of the functions but doesn't say what to do with it during plasma cutting. The cable looks like it might be possible to disconnect it completely but it doesn't unplug easily and it seems like a poor idea to force it.At this point, it can't be used so it is currently worthless.

Really handy with all the different functions and easy to use with pre set modes

If you're looking for a welding machine for your home shop this will work for you. If you want to weld aluminum buy a spool gun that fits it. There are inexpensive spool guns and this machine runs them nicely. The metal wire mig gun works ok. Arc stick welding is a little challenging but runs 7018 ok as long as you use AC/DC rod.