Actiontec Bonded MoCA 2.0 Network Adapter ECB6200 - Media converter - Ethernet, Fast Ethernet, Gigabit Ethernet, MoCA 2.0 - 10Base-T, 100Base-TX, 1000Base-T - F connector / RJ-45

Actiontec Bonded MoCA 2.0 Network Adapter ECB6200 - Media converter - Ethernet, Fast Ethernet, Gigabit Ethernet, MoCA 2.0 - 10Base-T, 100Base-TX, 1000Base-T - F connector / RJ-45

Q: What does "requires that your router support bonded moca 2.0" mean? can't i just use ethernet to ethernet via coax and get full speed bridging?

That statement is a little confusing. If you only want to purchase one bonded MOCA adapter to extend the network via coax, you will need your fios/cable modem with router to support MOCA 2.0 bonded. If you are using the two adapters to extend out the network to two different locations via coax, you will need your fios/cable modem with router to support MOCA 2.0 bonded. Otherwise like most of us, we will need to use one of these adapters at the off the shelf router because most of the certified Doscis 3.1 cable modems will not have a built in router that also supports bonded Moca 2.0.

Q: I already have moca built in, can I use each of these in other rooms to bring high speed data to them instead of using one to connect the router?

MoCA acts like an ethernet bridge, meaning it "converts" Ethernet to coax and back again, so that devices connected appear to do so over Ethernet (except for delay differences). If you have MoCA in your house, and it uses the LAN channels (not WAN), and uses no privacy, then this device can connect to that and appear to be part of the same network. For example, for those with Verizon FiOS, they have two MoCA channels; one WAN (C4 - ONT to the router) and one LAN channel (D-channel). The WAN channel has privacy enabled, and most commercially-available devices won't communicate on that WAN channel. However, the LAN channel has privacy disabled, and most commercially-available devices will communicate on that channel. The router actually has two MoCA transfceivers (one for WAN, one for LAN). If you have a MoCA device that already communicates over LAN (i.e., Tivo box), then it can connect to the router, and likewise, you can use one of these devices (Actiontec) to join to the MoCA network to provide Ethernet to another room. The limit for MoCA 1.1 is 16 devices, AFAIK, but this is a MoCA 2.0 device and I can't recall that device limit, but it has to be at least 16 devices. Note that the router serves as a device, and is most likely the NC (Network Coordinator), depending on your coax topology and best signal device.

Q: What comes in the box?

Two Ethernet to coax adapter boxes, two Ethernet cables, two short coax cables with female connectors and a coax splitter.

Q: Do any of these adapters allow input via Ethernet? All diagrams appear that input is via Coax only. My modem and current wiring is ethernet only.

I guess it depends on how you're defining "input". The idea is that you're converting RJ-45 to Coax, connecting via Coax then converting back to RJ-45. So if your Modem is Ethernet (RJ-45) and you connect that to the Actiontec and connect the Actiontec to Coax then at some other point in your Coax wiring, you connect the other Actiontec and connect its RJ-45 to something (let's say a network switch with a couple of computers on it) then those devices can talk Ethernet to your modem via the Coax wiring by virtue of the Actiontec converting RJ-45 to Coax back to RJ-45. Does that help?

Product ID: 730717058

Secure Transaction

Details

Brand
ScreenBeam
Hardware Interface
Ethernet
Compatible Devices
Desktop
Data Link Protocol
Ethernet
Data Transfer Rate
1 Megabits Per
Item Weight
295 g

⚡MoCA 2.0 bonded for lightning-fast speeds

📶Ethernet over coax for reliable home networking

🔗Gigabit Ethernet for seamless connectivity

Frequently Bought Together

ScreenBeam Bonded MoCA 2.0 Network Adapter for High Speed Internet, Ethernet Over Coax - Starter Kit (Model: ECB6200K02)

Filter, MoCA POE for Cable TV & OTA coaxial Networks ONLY

Description

⚡ Power Your Home Network Like a Pro!

PLUG AND PLAY SIMPLICITY - Effortless setup with RJ-45 and F connector ports—get your network up and running in minutes.
FUTURE PROOF YOUR NETWORK - Compatible with Fast Ethernet and Gigabit Ethernet standards to keep pace with evolving tech demands.
ROCK SOLID WIRED STABILITY - Eliminate Wi-Fi dead zones with reliable Ethernet connections through your home’s coax infrastructure.
DUAL PACK FOR WHOLE HOME COVERAGE - Two adapters included to extend high-speed networking to multiple rooms without compromise.
BLAZING FAST MO CA 2 0 BONDED SPEEDS - Experience up to 1 Gbps network throughput over existing coax wiring—no new cables needed.

The Actiontec Bonded MoCA 2.0 Network Adapter ECB6200 is a dual-pack media converter that transforms your home’s coaxial wiring into a high-speed Ethernet network. Supporting Gigabit Ethernet and MoCA 2.0 bonded technology, it delivers up to 1 Gbps throughput, ensuring ultra-reliable, low-latency connections ideal for streaming, gaming, and professional work-from-home setups.

Specifications

Compatible Devices	Desktop
Batteries Included	No
Batteries Required	No
Brand	ScreenBeam
Manufacturer	Actiontec, Inc
Item Model Number	ECB6200K02
Model Year	2015
Connectivity Technology	Ethernet
Cable Type	Ethernet
Product Dimensions	13.72 x 6.6 x 2.79 cm; 294.84 g
Item Weight	295 g

Have a Question? See What Others Asked

What does "requires that your router support bonded moca 2.0" mean? can't i just use ethernet to ethernet via coax and get full speed bridging?

I already have moca built in, can I use each of these in other rooms to bring high speed data to them instead of using one to connect the router?

What comes in the box?

Do any of these adapters allow input via Ethernet? All diagrams appear that input is via Coax only. My modem and current wiring is ethernet only.

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App