Ahulao Flysky FS-i6X RC Transmitter and Receiver FS-iA6B

1.Hold the OK key on the right side of the screen for 2 seconds to access the menu.
2. After changing the settings of the transmitter,
To save, please remember to press the "CANCH" key for 2 seconds.

Alaohu Flysky FS-i6X is a transmitter made for fixed wings/gliders/helicopter models.
If these icons are not menu, it will also work with RC quadcopter/car/boat.
It features AFHDS2A and AFHDS protocol, support up to 10 channels in a DIY upgrade.
Compatible with many ST**M FPV Drone RC simulators via PS/2 to USB cable.
RC simulator software sold separately.

FS-I6X and FS-iA6B are very well connected, so you don't need to make a new connection when you receive it.
In normal use, there is no need to connect the "Bind Plug" connection.

If you want to connect with other receivers, you can do the following:
1. Connect the included binding cable to the B/VCC port of the receiver.
2. Plug DC 4V-6.5V power supply into other port. Positive and negative poles cannot be connected accidentally.
3. Hold "BIND KEY" and turn on the transmitter to enter binding mode.
4. Transmitter shows RX voltage. This means the binding is successful.
5. Remove the binding wire and check the servo to work. If it doesn't work as expected, start this process from the beginning.

Description:
Item: FS-i6X RC Transmitter
Channel: 6-10CH (default 6ch)
Model Type: Fixed Wings/Gliders/Helicopter, even if these icons are not in menu, you can support RC Quadcopter/Car/Boat
RF Range: 2.408-2.475GHz
RF power: <20dBm
RF Channel: 135
Bandwidth: 500KHz
2.4GHz system: AFHDS 2A/AFDHS
Modulation Type: GFSK
Low Voltage Warning: <4.2V
DSC ports: PS/2 ports PPM
Rechargeable: No
Antenna Length: 1" 1" 1" (Dual Antenna)
Weight: 14.2oz 392g
Power Supply: 6V DC, 4 AA batteries(not included)
Display: STN transparent display, LCD 128x64 lattice,
VA 73x39mm LCD White Backlight
Size: 6.8 x 3.5 x 7.5 inches (174 x 89 x 190 mm)
Online Update: Yes [Upgrade cable purchased separately]
Color: Black
Certificate: CE0678, FCC ID: N4ZFLYSKYI6X
Joystick Mode: Mode 2 [Left hand throttle, press the left joystick up and down,
It will not automatically bounce back to the center. ]

FS-iA6B Specifications:
Item: FS-iA6B Receiver
Channel: PWM 6CH/ PPM 8CH s.bus 10CH / i.bus 10CH
(Choose from the transmitter menu "SYSTEN-RX setup-Outprt mode")
2.4GHz System: AFHDS 2A
Model Type: Fixed Wings/Glider/Helicopter/Quadcopter/Car/Boat
RF Range: 2.4055-2.475GHz
RF receiver sensitivity: -105dBm
Bandwidth: 500KHz
Modulation Type: GFSK
Power Supply: 4.2 - 8.4 V DC
Antenna Length: 1.06" 26mm (Dual Antenna)
Antenna Total Length: 5.9 inches (150 mm) x 2
Weight: 15.0 g 14.9 g
Size: 1.8 x 1.06 x 0.68 inches (47 x 26.2 x 14.9 mm).
i-BUS Port: Yes
Data Recording Port: Yes.
Color: Black
Certificates: CE, FCC

Package List:
1 x FS-i6X Transmitter
1 x FS-iA6B Receiver
1 x Binding Plug
1 x PS/2 to USB Cable
Ships without batteries

How to set up 10 channels
FS-I6X Open 10 Channel Radio Transmitter
Hold the OK button for 2 seconds to enter menu settings.
Select system settings and input
Push down to the last item to enter Aux SWitches auxiliary switch settings.
SwA B C D is set to ON.
Changes to Ch6, Ch10.
Long press CANCH key to save and finish automatically.

Model Number	FS-i6X
Batteries Required?	Yes
Batteries Included	No
Material Type(s)	Plastic
Target Gender	Unisex
Manufacturer recommended age	15 years and up
Item model number	FS-i6X
Product Dimensions	17.4 x 8.89 x 19 cm; 399.16 g
ASIN	B0BRXM1K4X

Flysky FS-i6X 6CH RC Transmitter and Receiver FS-iA6B 2.4GHz AFHDS 2A Radio Control System for FPV Drone Multirotor Fixed Wing RC Boat

Description

Specifications

Common Questions