CXWXC Bike Workstand with Adjustable, Bicycle Repair Stand for Maintenance Folding and Lightweight (Champagne-3)

I've bought a lot of stuff from Amazon, but nothing has surprised and delighted me more than this bike maintenance stand. It's relatively lightweight for being as sturdy as it is. It folds down and sets up quickly, although I do usually leave it set up in a corner of the garage for summer biking season as it's not too bulky even when fully assembled. What most surprised me is how securely it holds even heavy e-bikes. Mine are right around 50 lbs or just over even with batteries removed, and this stand feels rock solid while holding them. The frame and leg clamps have quick release levers with tension knobs for fine tuning the hold. The cleaning tools that come with it if you buy the set are worth while also. I hadn't used an automatic chain cleaner like it before and it works great for cleaning a mucky chain especially if you're using an all-in-one degreaser and wet lube.

Surprisingly, the stand was delivered in two boxes and the stand was wrapped in bubble wrap. So, no scratches or damages. Setup was easy since most of it is already put together. You just have to install the top clamp (removing one attached screw) and the tray. I was surprised by the sturdiness of the stand since some people complained about it. I have a Marin hybrid weighing about 40lbs. The stand didn't budge when I set the bike in the clamp. The bike clamp has a quick release so it's basically a memory tightness around the bike frame. You can spin the bike upside down with a quick release of the clamp barrel and then securely lock in in place again. The teeth on the barrell seem strong, but time will tell if they start breaking off. I don't anticipate this since I'm not going to spin my bike around like a ferris wheel. Adjusting the height was also easy and I did this while the bike was attached to the stand. I just held the bike while releasing the release and slowly allowed the bike to drop down or raised it into the proper position before locking in place. I did a LOT of research on bike stands based on durability and price. I'm very pleased with this bike rack and the price is very good.

Overall, I think it is a decent value for the quality. It is fairly easy to assemble and put together. Put my 35lbs MTB on it and it seems to be stable enough and holding it just fine. There were no parts missing. Assembly instruction was fairly easy to understand and follow. Now, I did a detailed inspection. The aluminum tubes are sturdy enough for average usage. It isn't heavy duty but good enough for most common bike repairs. The clamp is functional and easy enough to use. The triangular support bars are plastic and it is fine for the purpose. The reason I didn't give it a 5 star is because of the clamp head and "neck" design. I thought the neck piece where the clamp head would attach to is made of metal, but it turns out to be plastic, about 3mm thick molded plastic. That piece is attached via 2 rivet bolts to the aluminum tube. That concerns me. If anything happens to that neck piece, then the entire stand is done. All the stress are concentrated on that neck piece. I wish it would be made of metal of some kind. That stress is concentrated on the bend of the plastic piece and the mounting of the rivet bolts. If the clamp head ever experience any over stress, I am afraid that plastic piece may crack or break. I hope the seller have replacement part. If not, then I would have to figure out a way to address it when it breaks.

Pretty pleased with the performance of this bike stand. Seems like a good bargain compared to what the other stands cost. I use it to work in my road and hybrid bikes in my living room. Also bring it outside and use it to hold my bikes when I give them a good washing. It is very stable and the bikes are pretty secure when I have them clamped in. The stand does seem a little large, but I can still fold it up and hide it against a wall along the floor.

After trying and returning 3 stands. This is THE ONE. Heavy duty main post. Easy to set up. The tray is nice even has a magnetic area. Folds up nicely. Would definitely recommend.

I have many many bikes that I do my own maintenance on, from simple lubing of the chain, to a complete tear down of every nut and bolt. Many years ago I had a very expensive parks repair stand and have unfortunately parted ways with it many years ago. When I was in the market for a replacement I was not unfortunately in the market to spend a lot of money. This had many positive reviews and for the price I figured I could not go wrong. I was correct in that assumption. This repair stand is not to the level of a Park's work stand costing several hundred dollars, but it is worth more than the price I paid for it and how much easier it has made my life when it comes to repairing and maintaining my bicycles. I am partially disabled so standing and bending becomes an issue. I like the fact that this not only is adjustable to standing height, but it is very adjustable to being able to sit on a rolling stool and move about as I work on the bike closer to floor level. The stand also includes a detachable tool and parts tray. This fits and works nicely and has a small built-in magnetic strip to hold hard to control parts like ball bearings. The stand can be a little tipsy at times because of it's light weight, but if that were ever to become an insurmountable problem, I would merely buy a couple of bags of sand and lay them across the two legs that stabilize the stand. It is never come to that point but that would be a simple solution for a common complaint. Here's a pro tip, the front wheel stabilizer which is included with the stand, can be a little difficult to fasten, at least for me with my disability. The stabilizer rod is used to keep the front wheel and handlebars from flopping to the side especially when the bike is tilted upwards. The rod is expandable to adjust for the size of the bike and has two thick rubber straps that have a button on one end and are perforated on the remainder of the length. These are designed to wrap around the stand and to wrap around the handlebars and then have the button pushed through the hole in the rubber strap. This can be a bit awkward and frustrating. My solution as you can see in the pictures, was to use a small carabiner which is much easier to place through the holes than the button. It also acts as a great hook to fasten the stabilizer to the stand itself when it is in storage. Another tip, is fasten your handlebars to one end of the stabilizer and the other end to your seat post, not to the bicycle repair stand as indicated in the instructions that came with mine. This will make it much easier to remove the bike from the stand in order to turn it around to work on the other side, or to remove the bike from the stand for other reasons. All in all if this broke tomorrow I would buy another one the same day. Very happy, easy to put together, and enjoy to use.

This bike stand is perfect. It is solid, well made, and stable. The legs are long to give it added stability. It is lightweight and relatively easy to assemble. I intend to keep my bike stored on it in my barn and also use it for maintenance. Recommend it without reservations.

If you work on your own bike like I do, you NEED this bike stand! It was easy to assemble, folds up easily, is very sturdy when open, light weight yet strong and looks great. I couldn't do the maintenance on my bike without this stand and trust me I've tried to be cheap and not use a stand. This bike stand was worth every cent! It holds it securely and at any angle. I love the little tool tray, very handy.

Super Fahrradreparaturständer. Fester Stand, gute Verarbeitung, alles dran, was man braucht. Sehr fairer Preis. Bin begeistert.

Es fuerte y aunque mi bici no supera los ocho kilos creo que aguanta más de 30 kg. Tiene un buen precio

The stand is good and it came in good condition

Very good for the price! Sturdy. Feels well constructed. For the occasional usage it's great, not sure how it would stand up to heavy usage. The little parts tray has a magnet in it to stop screws rolling around. Great small detail!

Do t normally write reviews but thought this deserved it. We’ll built. Rock solid. Folds up like a camera tripod. Lots of adjustability. Quick release. Easy to use. Easy to assembe. Good instruction. Video helpful too. Make sure you read instructions because one of the steps involves removing and refitting a bolt other wise bike won’t balance (it’s clear in the instructions...just don’t dive straight in like I did!). The top end bike stands cost hundreds this is equal quality for fraction of price. There are cheaper on Amazon but glad I got this one and paid a bit more.