SEALIGHT 9008/H13 Fog Lamps 80,000LM for ATVs & Powersports, 2026 Version, 9×Brightness S7S Series Wireless H13 Fog Bulbs 1:1 Real Size 10 Years Lifespan- Pack of 2

I could not find ANY LED bulbs to fit my 2008 Mercedes GL320 - which I replaced with a 2012 Pathfinder. The Pathfinder had the exact same, terrible, Halogen Bulbs! However, these LED lights work WONDERFULLY in my Pathfinder. 9.9 / 10 rating Note: My Pathfinder has clean, crystal clear headlight lenses, not sun-faded, yellowed lenses. NOTHING will shine well through yellowed headlight lenses. If your headlight lenses are clean and clear, please keep reading. If not, spend the $80 to have someone professionally clean them. Pros: 1. Low-Beam light is 25% brighter than Halogens which doesn't seem that impressive until you consider the perfectly white LED light makes EVERYTHING it shines on more visible. My old halogens projected a dingy yellow light. 2. Street Signs at Night - This is the truly amazing thing with these LED bulbs - even on low-beam, street signs way down the road illuminate as if they themselves have built in lights. Street lights are almost impossible to see with the stock Halogens. Let me repeat, street signs POP with light using these LED bulbs - they become very easy to read even for someone like me with vision challenges. 3. The Hi-Beam is 200%+ as bright as the stock Halogens. I mean 75+ yards of beautiful white. 4. On low-beam, I clearly saw a deer on the side of the road that I would have NEVER seen with the stock Halogens. 5. Not very important but boy do these make my Pathfinder look NEW with the bright, crystal colored white headlights vs the old, dingy yellow halogen bulbs. 6. The beam pattern for low-beam is much better than I expected. It's certainly as good as the stock halogens. No adjustment was needed. 7. Installation would have been simple and only 15 minutes if I had not been an idiot to begin with :-). Watch the video and you'll avoid the stupidity I inflicted on myself! No tools, no cutting, no modifications of any type are required. Factory bulb retaining right works beautifully. 8. Package came with white gloves - a nice touch to help you avoid getting hand oils on the new LED bulbs but also to help keep your hands clean. Cons: None. Maybe, being nit-picky here, low-beam pattern could be a smidgen better but I'm really splitting hairs. I can't speak to longevity but LED's are supposed to last a long time, much longer than halogens. I have high hopes. Bottom Line - These lights will not only help you see the road more clearly this reducing stress and fatigue driving at night, they may even save your life by helping you see potential dangers you would not see with the halogens. For $45, buying these is a no-brainer.

Very bright with excellent beam pattern . Best lights I’ve bought and I’ve had many

Supper bright lights. Didn fit my truck correctly. Installation was not very easy but not hard. I was getting bright lighted on low untill I readjusted my lights. Good quality

So I will make this clear for anyone who buys. The low beam bulbs fit perfect for my 2018 ram 1500 ST. The high beams (i think it is. Or it may be the low beams) the back end sticks out. Now all you have to do is buy the rubber put and replace the cap. I also had to find out that the headlight that sticks out is too close to the back of the plastic part of the housing. So you will have to cut out the part that does not fit. Slap the boot on and then zip tie it. Other than that I LOVE these headlights. They are BRIGHT. But for how i had to go around a few things. I gave it 4 stars

I bought these lights for my 2019 GMC Canyon. They work great! It took me about 20 min to install not because it was hard but I had to take some thing off to get to the housing. I can't believe how bright they are I can see at night again. I tried some other bulbs that took 5 months to get after I installed them I ordered these light got in 2 days and wow. This is going to be my new bulb for the future no need to look for anything different I absolutely love them.

Why didn't I change to these years ago!!!!! I drive 120-150 miles a day for work. Most of that is after dark. If you have ever driven on new blacktop roads in the rain in the dark...you know how life can suck!!! You can't see the road most of the time. And if any car is coming towards you at night.. The city where I live is currently re-topping every road in the city. Many still don't have lines on them. I just (3 months ago) bought the most expensive Halogen lights available. And while an improvement from what I had...still pretty pathetic. Tonight, after changing this today, WOW!!!!!!!!! I couldn't believe how much better I could see. Signs were lighting up as if an actual sign light was on them. I was out in some very wooded winding road areas in a fog and mist that make that kind of driving a bit scary. Tonight it was amazing! I don't have enough great adjectives for how awesome these are. I can't report on longevity as I don't know yet. Maybe I got a bad one that will die tomorrow. I hope not. And it does I'll addendum my review. As for installation in my 2014 Nissan Frontier... beyond simple. I watched a couple of videos before I got them which made it seem like it was a bit tricky unless you watched the videos. The ONLY thing I knew from them that I really needed was that you remove the locking ring that comes ON the new lights before installing the lights. Here is the simple as-can-be-install guide from my doing it: 1) Twist off the current locking ring from the existing lights. (this can be a pain on the battery side but it can be done without taking out the battery if you can at least move it over a couple of inches.) 2) Pull out the existing headlight bulbs. 3) Disconnect the bulb from the wiring by lifting the locking clip and pulling the bulb out. 4) Take the locking ring off the NEW LED lights. 5) Put the new locking ring into the back of the light fixture. There will be 3 indents to line up with 3 outdents. This will make sense when you look at it. VERY simple to understand when actually looking at your assembly. Press it in so it's secure and flush. 6) Take the old locking ring and put it back into the back of the light fixture and lock it (over the new ring) into place. 7) Insert the new LED into the hole, lining up the 2 indents in the ring with the 2 outdents on the bulb. One is a touch wider than the other so you can't get them backward. Once pressed in turn (lock) it into place so that the LEDs are facing 3 and 9 o'clock. In my case, it meant the wire sticking out of the light was pointed UP toward the hood. 8) You are done. Literally, each side MAY take you 3 minutes to do. I hope this helps you with your installation. It really is even simpler than they make it seem in all the videos. And it will blow your mind when you see the difference if you are going from Halogen to LED. Greg

Sooooo much brighter than my stock bulbs. I can finally wee better at night. The install took me less than 10 min and no tools required. On the side where the washer fluid On the side where the washer fluid reservoir is was a little tight but was able to get the switch out done without removing it. Highly recommend

First off...the S7S 9007 are awesome lights. 65watts per lamp (130watt total) Very bright on low bean. Probelm is the high beams would not work. I have owned other Sealight leds 9077 lamps. X1 to be exact. Working flawlessly for over 5 years. The X1's and some other models have built in decoders/Drivers. S&S 9007 DO NOT!!!! The reason for the 1star rating...which should be ZERO is the tech support, if you want to call it that...it is totaly horrific!!!!!!!!!!!! First off, Sandy at Sealight says she is tech support. She could barley speak english, as well as other so called tech support people. Second they told me to solve my problem they were going to send me at no charge...decoders. Whast I was sent wre parallel 50watt 6ohm load resistors. I had no error code on the dash or in my computer of my 2010 Ford ranger Sport. Sealight says 99% compatability....I guess I am the 1% NOT!!! When I called up earlier today to tell sealight tech support that there so called decoders did not work...why...they where load resistors. Maria, another so called tech support specialist did not know the differens between the two. While talkin with her...I was on Sealight website...I could not find any type of adon decoder...JUST LOAD RESISTORS. So that is wrong as well. Maria had to transfer me to the Amazon support area of Sealight to do the return....I asked why...Maria stated that they can not be reurned to Sealight through Amazon. Next...the so called lady at sealight amazon support and return area was just as worthless as Maria and Sandy...Maybe even worse. I had to explain the whole thing all over again, and how I was transfered to her so I could my AMAZOn purchase of their S7S 9007 LED lamps. Her question she asked.......and this is no lie!!!!! She asked...did I buy the product on Amazon. Needless to say I hung up, and in under a minute I was able to due a refund through amazon. Sealight...get tech support people who speak and understand english and most importantly.....know your products and and how your LED products work. I will never buy Sealight again. Al

El producto funciona correctamente, desgraciadamente no cumple con la cantidad de luz requerida para realizar mis viajes nocturnos en mi Jetta a4. Por lo cual, me vi en la necesidad de devolverlo.

I've tried a bunch of different types and brands of LED headlights, but these are the first I that don't require a separate connector box. These bulbs are very compact - basically the same size as the regular halogen bulbs so they will anywhere the regular bulb does. I really like that they come with an extended wire to make the connection to the factory harness, which makes it really easy to fit the bulb, wiring and connector inside the factory housing without having to kink the connector wiring. They are really well made - solid aluminum and feel sturdy. Better quality than the cheaper LEDs I have tried which had chintzy wiring and a fan that failed in the first hour. They are quiet - no fan noise that I can hear at all. I have them installed as high beams in my Chev Colorado and they are super bright. Not sure how many lumen and I have tried LEDs previously that were advertised as 12,000 lumen and these are every bit as bright, probably brighter. Yes, they are more expensive but totally worth it for the compact size, lack of separate connector box, and excellent build quality.

No es lo q publica no tiene buen brillo por la noche en la ciudad de pierde el as de luz con luz de frente de otros vehículos se pierde No los recomiendo

Installed in a '17 Pacifica w/ projector housings. Had previously bought the S1 version with minimal improvement over stock halogens. Tried these and was impressed with the brightness at night. Drove 4000+kms, many overnight, and definitely appreciated the visibility given by these bulbs. Now, they are no match for legitimate HIDs, but are an extreme upgrade from stock halogen bulbs. Considering the low beam output, I can only imagine how bright they would be had I also used them for my high beams. Overall, would recommend!

Well what can I say, they worked exactly as advertised. It really was a 5min install in my 2015 Sonata (once I got the old ones out). They are brighter then the ones they replaced. But I will say, after dealing with true HID systems previously, they are not true HID bright. Overall they seem like a good buy, definitely don’t feel cheap. I can’t comment on lifespan yet thou. Update: replacing with a different brand/set. They’re just not bright enough around town or on a dark highway. Not changing my overall rating, they are good quality. But the brightness just isn’t there for me.