67mm Phone Lens Filter Adapter Mount for iPhone 16 15 14 Pro Pro Max Plus, Double-Sided Magnetic Phone Lens Filter Ring with 1/4-20" Screw & Cold Shoe Mount Pull-Out to fit 16 15 Pro Max (No Filters

I was worried that this would not fit my iPhone 15 well, but turns out this is a perfect fit. I wouldn't count on this holding much load if you put an overhead handle on it, but fine for lighter loads. The top cold shoe works well enough for a small shotgun style mic. Heavier lights may be an issue long term because the mount is only held in with small screws and I have had to tighten these a few times already as the became loose with some heavier rigging setups I tried. The magnet is strong. The provided filter variable ND is fine, but I planned to use a 82mm VND I had on hand anyway, so not really a deal breaker for me. Threading the step up ring on to the mount was a little fiddly, but with some patience it works fine. This is a little pricey for what you get, but it meets my needs and the other comparable products were much more expensive, or the quality was much lower, so it's a trade off that I am willing to accept.

I purchased this to use with my iPhone 16 Pro Max and it works great for the price. I didn’t want to spend a lot to manage camera accessories for the phone and this fit the bill. Pros: Sturdy build. The magnet is strong and I don’t worry about the phone falling off the device when it’s used as a mount for a tripod. The lens holder works with the ND filter that I use. It fits my iPhone 16 Pro Max. Cons: It’s not entirely compatible with my current iPhone case and in order for it to fit over the camera lenses properly, I must remove the case first.

For those who are curious, it DOES fit/work on most cases maybe like 90%. As you can see in the pics, it doesn’t quite seal around the camera island and leaves a little space. As a result, you can’t really use the wide angle lens purely because of the overlap of the edge of the filter and that space. It’ll show on camera. However, the main and telephoto lenses work great with no light leakage from that gap. I’ve tested this with the Mous Limitless 6.0 case and the Spigen clear case for iPhone 16 Pro Max. The experience may vary but I can assume it would be similar with most cases. The filter itself does what it needs to do, but just avoid the max light stop as you’ll get those Xs everyone is talking about. The magnet strength is also pretty good even with that gap as well. Overall, this is probably the best option for a reliable variable ND filter that fits with most MagSafe cases instead of just those clip-on ones you see all over Amazon. Just taking off a star for not making this full-compatible with phone cases!

Product works perfectly! I bought the adapter with the ND filter and pouch. I have a basic slim case on my Iphone 16 proMax and the magnet still holds really solid. I also removed the rubber bumper from the lens cover and it fits perfectly with my case on. ND filter has stops so you wont get the X pattern. Highly recommend! really easy to use and a great design.

Perfect to keep the 180 grades rule

Doesn't make a tight enough seal between the back of the mount and the phone lens. It's a good enough idea, and may work great for other models, but doesn't really fit my iPhone 16. Tried it with and without phone case, and have the same problem. The small amount of light that comes in through the gap creates shadows or reflections in the final picture.

It is good design with a few flaws 1. It cannot work with most phone case. 2. The unit does not fit perfectly so that light leaking still happen 3. Maglev is not strong and there is the chance you may drop the phone 4. Does not allow the filter work with dji phone gimbal I still recommend this unit because 1. Most alternative products have the above problems 2. Cost is better than most alternative products

I was looking into figuring out the best method of getting a polarizer or ND filter onto my iPhone and was almost going to get one of those cheap clip on ones until I saw this. I’m satisfied with this product because it has a magnetic mount which is perfect because I know that it will stay in place throughout the day. So far, taking my phone in and out of my pocket with this on has been very solid and it hasn't moved around or anything. This item did fit my iPhone 15 pro with a case on, however the rubber gasket did make the filter ring protrude a little. To fix this, I simply took the rubber gasket off and inverted it. I would have removed the rubber gasket entirely but with a case on and no rubber gasket there is a lot of light seepage. Overall I’d say this product is definitely an inexpensive option especially considering a lot of other brands charge 3-5x more just to have a secure way to put a filter on your iPhone.

Es un buen producto y el material acorde al precio

Awesome kit and good quality but I haven’t had the opportunity yet to try it. As soon as I do, I will provide more information.

Excelente producto, lo busqué por meses hasta que finalmente lo adquirí por Amazon. Tiene todo para ser mi adaptador de filtros favorito. Puedo adaptarle más cosas como tripodes, trípode magnético de bolsillo, ssd, luces, microfono... Hay dos cosas a considerar: 1) Cuando lo usas con el celular sin funda va de maravilla, esto es porque no entra luz debido a la goma que va alrededor y que sirve para protección del área de las lentes del celular. (El inconveniente es que queda el celular desprotegido) 2) Cuando lo usas con funda también es genial, pero recomiendo funda con magsafe (Case Magnético) y el único inconveniente al usar la funda es que debes quitar la protección de goma y si deseas grabar en situaciones donde hay mucha luz, es aquí donde le entra luz a las lentes del celular por lo que tendrás que buscar la forma de que no le entre luz (lo hice con cinta aislante pero debería haber alguna forma de mejorar el adaptador de filtro cuando se usa con funda el celular)

Très bon accessoire mais pas pratique avec coque qui possède un anneau servant de support au teleohonev

Pros: - Easy to use. - Compatible with any device that has MagSafe compatibility. - Works with many 67 mm thread filters. - Good quality material. - Comes with a cold shoe and female thread mount adapters that are removable. - Includes 2 extra screws and a screwdriver for the mounts. - Can stack additional MagSafe-compatible accessories. - Removable gasket seal for better fitment. - Reasonably priced. Cons: - Might not work with some phone cases. - The internal phone flash might not be usable depending on your filters. This is an excellent product that simply works by attaching it to a MagSafe-compatible device and putting on whatever 67 mm thread filter you desire. It does not require any special case/adapter, as long as you have MagSafe. This would also work if you get those adhesive MagSafe plates, so not only older iPhones, but also other devices, too, depending on your device's camera placement. I was able to fit all my existing 67 mm filters, as well as my wide-angle lens, which is heavy, but no issues, all while using the camera app. The build quality is surprisingly good, built out of aluminum with a couple of plastic parts, and a silicone backing that prevents it from scratching your device. The adapter mount comes with a screwdriver and extra screws for the included cold shoe mount and female thread adapter to attach other accessories, with the option to remove them for a more flush feel. It also has MagSafe built into the back of the product, so you can attach any MagSafe-compatible accessories on top of it, creating endless possibilities when creating a modular rig. For those who are concerned about removing their case to use this product, I find that it works well with my OtterBox Commuter Series Case by removing the rubber gasket around the camera cutout. I also found that it works even with the gasket on, so I would say this would all depend on the case you use, but it's probably best to use it without the case, according to the seller's details. The best part is that it is reasonably priced for just under $40 CAD! Since I own a lot of 67mm thread filters and accessories from my professional camera, all I needed to do was purchase this, and I was able to use whatever existing gear I own. One takeaway I'd have is that I had trouble using the internal phone flash as it was reflecting off the filter into the camera lens. Fortunately enough, it includes a cold shoe mount to attach an external flash or other accessories, which makes up for it. I haven't tested it with the microphone on since I only intend to use it for photography purposes. Overall, I would recommend this product if you want to spice up your photography game by adding different filters and creating a modular rig without having to purchase those fancy cages/cases that are limited to using any existing camera equipment you have, all while not breaking the bank. 5/5 Stars!