Wooden Watches Uwood Series 40 mm Unisex Natural Handmade Wood Watch with Gift Box & Band Adjustable

Un po’ difficoltoso da stringere, ma basta un po’ di manualità e si riescono a sfilare le maglie. Fa un figurone e per il prezzo è davvero un affare. Veramente soddisfatta. L’unica pecca è la scatola in cui arriva, un po’ anonima, dimostra un po’ l’economicità del prodotto. Per il resto impeccabile.

Item is nooit bezorgd, ondanks vraag bij verkoper nooit een reactie gekregen. Al 2 maanden niet. jammer!

Wunderschöne Uhr, super leicht und angenehm zu tragen. Auch ohne Anleitung ist das Armband leicht zu kürzen. Wurde schon mehrfach auf die Uhr angesprochen. Ich bin einfach nur begeistert.

Absolutely love this watch, but there are no instructions for removing the links, so I figured it out and I'm here to help. Set the watch link you want to remove into the tool like you would a vice, but you have to use your fingers to hold it in place yourself. Line up the pin on the tool with the pin hole on the watch link. Turn the pin head/knob on the tool so that it extends into the hole. This is the part people are messing up on, and this is how you keep from breaking the pin on the tool [but they do include replacements just in case]: When the pin in the link starts to come out the other side, look to see if it has a head. If not, pull it out and use the knob on the tool to push it back in. Reset it in the tool so you can push it out from the other side instead. Now when the pin comes out you should see that it has a head, and it should come right out, either with or without pliers. If you still have trouble getting it out, push it back in with the head/knob of the tool's pin, and try again, or try another link, but I can guarantee that, if you're having issues after switching to the correct end, it's likely because something isn't lined up right. Pull, shift, jiggle, etc. It is tricky to line up all those little holes. There's no need to force anything until you're pushing the pin back in. If you think about how this works, it's seamless, but also consider that you're pushing a metal pin through a tight tunnel of wood that's probably not smooth inside those holes. Last instructions: Do the same thing again to take the link [or links] off and save what you remove in case you don't like the fit or decide to gift it to someone later. I got it to fit my slim wrist perfectly but it hurt my bone when I bent my wrist so I put one link back on. Come to think of it, I always see this style of watch fitting a little loosely when I see them on other men. Something to take note of, leave a little slack for it to slide around slightly. Now realign the links and slip one of the pins back in to hold them. This is the part where you have to take care to make sure all the holes are lined up and make sure the pin is going straight in. Turn the tool around and use the head of the knob to force it into place. For good measure, you can even use the pin of the tool to push it back in a 16th of an inch so it's even. Hope this helps!

Yes