14" Rx350 & Tx350 Car Screen Protector For 2023 2024 Lexus Rx350/Rx350H/Rx500H & 2024 Tx350/Tx500H Accessories Navigation Gps Touch Screen 9H Hardness Tempered Glass - HTrand Trand sp

Great quality and perfect fit! Clear, easy to install, and works great . Highly recommend 👍

Overall, great quality screen protector. Fixs with 2023 Lexus RX500h. You might need to peel it off a few times to adjust the angle. (Otherwise, there will be bubbles underneath). Make sure the car is not dusty during installation.

It took three times to get it right but it works great once you get it. I follow the instructions to the letter, and it worked well. The first two times I tried to get it on there were sections that would not sink in and fully attached. Always near the edges. So I took it off very carefully and slowly because if you go fast it will probably break. Just put a little pull up pressure on it and it comes right off it just takes a minute. Then instead of butting it all the way against the edge of the screen, I made sure there was at least about a millimeter from the edge. The first time I tried this I didn't get it just right so I had to take it off again. Third time was a charm. It set itself completely with no bubbles and it looks good and it definitely does a good job reducing fingerprints so I'm very pleased. And this is to my surprise because some of the reviews made me think there was very little chance of success. Also, I use nitro gloves and I also cleaned the screen with a lint-free cloth and premium glass cleaner ammonia-free stuff prior to starting their installation instructions. The lint-free terry cloth of course left lint and streaks so I was a little worried but the wipe that they provided followed by the non-woven cloth worked perfectly. Use gloves and prepare the surface and make sure there's not lint flying around. Some of the negative reviews have bubbles and it's clear that some of the negative reviews have bubbles and it's clear that that's from lint or some kind of screen imperfection. The screen doesn't line up 100% accurately in 100% of the edges and cutouts, but there's barely a noticeable difference in the areas where it's not absolutely perfect. 90% of it is absolutely perfect in my particular case anyway. I think a lot of it comes down to user installation and alignment technique. Here's to hoping this last long and does the fingerprint trick. Did not notice any glare reduction. Just FYI

We just purchased a new car and thought we already had scratches on the screen. It was good to know there was a very thin factory plastic on the screen and that had the "scratches" So I bought this right away to make sure the screen stays protected as the factory plastic was too thin and not very good looking. The screen protector came with everything you need. It cam with wipes to clean the screen before putting on the protector. It had stickers to help line up the protector for a perfect fit and a card to squeeze out all the bubbles. This was one of the easiest protectors I have installed. The quality looks good and more important the screen to the car looks great and I know it will not get damaged. The touch screen works as normal, the protector doesn't interfere with the touch sensitivity.

This screen protector installed as easily as any phone protector. Same process, just a bigger screen. Looks great, functions without issue. Tips / caution: I test fit the screen just as recommended. Like other reviewers, I noticed that the screen doesn't match up precisely but it's so close I don't care / notice once it's on. The two alignment stickers seemed strong enough to hold screen in place before final application but I went ahead and used three small strips of blue painters tape as well just to be sure. Once the screen attached to the surface, it started to adhere all on its own. I gently pressed / swiped across screen as directed and pushed out the few air bubbles that appeared. The one thing I strongly suggest you be careful of: The dust removal sticker is pretty tacky, just as it's supposed to be. But on my screen, I noticed that the sticker apparently pulled up on the navigation screen and caused tiny bubbles to appear. I stopped immediately and gently pressed down on the nav screen to make the bubbles disappear. This isn't an issue with this product . . . it's just something that occurred on my nav screen. So be careful! Maybe you can test the dust sticker on a small area of your nav screen first. Or, if the surface is already dust free, go without it. That's what I wound up doing. Additional: If you have polarized sunglasses, the screen image will become distorted