WALI Single Monitor Mount for 13-34 inch Screens, Adjustable Single Monitors Arm, Regular Screen up to 32 inch, 26.4lbs, Computer Monitor Stand for Desk, VESA 75/100mm (GSMP001N), Black

I have bought four of these by now, in three separate orders, for my work desk. (I have lots of monitors.) First, the good. These are very heavy duty and easily adjustable. I have Dell 38" and 34" ultra wide monitors attached to them, and there is no "give" or drooping whatsoever. So if you are looking for a monitor arm that can hold even very large monitors like that - here it is. I would definitely buy more. Now, the bad. The four of these I have bought have come with wildly different attachment setups, despite all being the same item here on Amazon. It's like over time, the company just keeps re-designing or changing this arm. Why is this bad? The first two I bought were very easy to attach to my desk. Clamp, handscrew, done. The third one had a different system that was fussier, but at least still one handscrew. The one I just got had a totally different, much more complicated clamp that involved assembling multiple parts into the desk clamp, then tightening it to the desk with two bolts and an Allen wrench. It seems like the manufacturer is making these more complicated and harder to attach as time passes - no idea why. The ones I bought first, last year, were ideal as is. In any case, once attached (one-time effort), these are great. So I would buy them again and just get over the installation with some muttered grumbling about their clamp design engineers. I have also bought smaller arms from this same company WALI, and those were not good. Very flimsy, never would maintain a height or angle or level. This heavy duty one at least is solid, stable, and maintains its position. The various angles have tension screws for fine adjustment. I just replaced one of WALI's smaller arms with one of these and *finally* that monitor is, and stays, where I want it.

I recently picked up the WALI Single Monitor Mount for my desk setup, and I’m thoroughly impressed with the quality at this price point. It’s a massive upgrade over the stock stand, both in terms of ergonomics and reclaimed desk real estate. What stands out: Smooth Gas Spring Adjustment: The tension is easy to tune using the included hex key. Once dialed in, moving the monitor up, down, or tilting it is effortless, and it stays exactly where I put it without sagging. Sturdy Build: I’m using this with a larger screen near the upper end of the size range, and the mount feels incredibly stable. There’s no wobbling or "bouncing" when I’m typing or gaming. Easy Installation: The choice between the C-clamp and grommet base is great. I went with the C-clamp, and it took less than 15 minutes to get everything mounted and cable-managed. Cable Management: The integrated channels do a great job of hiding the power and DisplayPort cables, keeping the "floating" look clean and professional. Bottom Line: If you're looking for a gas spring arm that can handle 34-inch ultrawides without breaking the bank, this is it. It feels premium, looks sleek, and functions perfectly.

The installation process was straightforward and didn’t take much time at all—even if you’re not particularly handy, it’s easy to figure out. What really stands out is how flexible the arm is. It adjusts smoothly in multiple directions, making it simple to position my monitor exactly where I want it. Whether I’m working, watching something, or multitasking, the range of motion makes a noticeable difference in comfort and productivity. It’s also very sturdy once set up. My monitor feels secure, and I haven’t experienced any sagging or instability. As a second screen mount, it integrates perfectly with my desk setup and helps keep everything organized and clutter-free.

The WALI Single Monitor Mount performs about the same as my VIVO single monitor arm, which was a pleasant surprise given the lower price point. Setup was straightforward, and the gas spring adjustment works well once dialed in. It holds my monitor securely and offers the full range of motion I expected—tilt, swivel, rotation, and height adjustments all function smoothly. That said, the materials and overall build quality do feel a bit cheaper compared to higher‑end arms. It’s not flimsy, but you can tell where costs were saved. If you’re willing to spend roughly 60–70% more, you can definitely get a noticeably sturdier and more refined arm. Still, for a budget option, this one delivers exactly what it promises. Pros - Works just as well as the VIVO arm in terms of functionality - Easy to install with both clamp and grommet options - Gas spring provides good adjustability once set - Excellent value for an entry‑level monitor arm Cons - Materials feel cheaper than premium alternatives - Build quality isn’t as high as more expensive arms Overall As an introductory monitor arm, this is an excellent choice. It does everything the VIVO arm can, just with slightly lower‑end materials. If you’re on a budget or setting up a simple workstation, it’s a great fit. If you want something more robust for long‑term heavy use, spending a bit more will get you a significantly more refined Monitor arm.

This makes the 4th mount we have bought and all have worked amazingly. We recently bought two of these to complete a triple monitor mount on a racing sim rig. I was surprised at how well these supported the 32” monitors. These are older monitors too so they are about 19 pounds each. Installation was easy. Range of motion works as it should. I’d highly recommend these for anyone looking for a monitor stand.

I bought this based on other reviews. The only known mount option for the G9 Odyssey costs $400. I bought this mount as opened box for $70 making it quite the cost difference between the two choices. For other odyssey owners out there this mount will cover your needs, the reviews are accurate. However you will need to follow a couple quick steps. Before mounting the monitor, assemble the arms together on your desk. Be careful not to lose the little metal tabs between the arm shrouds they fall out easily when you take the arms apart later. Next take the provided tool and spend a minute rotating the middle of the arm adjustment screw towards the + symbol. You will question if the bolt will fall out from the amount of turns needed. Doing this is required or the gas piston won't hold up the monitor! Next the problem child of this mount is the vertical up/down tilt at the end of the arm. The included bolt won't hold the odyssey up and its a pain to deal with when the monitor is mounted. So trash it. Now take the heavy piston arm to your garage or hardware store. I found that a 13mm bolt head fit the hole and threads. Add a washer on both sides followed by a castle nut. You will need two 13mm wrenches or socket wrench to tighten the new bolt down, it won't take much pressure. Next reattach the arm onto the mount, without the monitor. Use a level or eyeball it to tighten it down evenly leaving the tilt at 0 degrees. Though it might be best to tilt it back or upwards 10 degrees due to how the arm mounts into the monitor bracket. Lastly mount the back plate to your monitor and attach the piston arm. If you're mildly strong pick up the monitor with the screen facing you then drop it into the mount on the desk. Really it's a two person job! If the monitor is tilted incorrectly you are going to need a friend to hold it or adjust it as you tighten/loosen the new bolt again, a major pain. I had it sitting on the desk and it was a thirty minute fight trying to get the tilt right. Turns out the mount itself on the arm tilts forward about 10 degrees making the monitor tilt down a little. Ughh just bring a friend the tilt adjustment is an all or nothing ordeal. Too Loose the monitor flips down and too tight it won't budge. It was terrible juggling this thing with tools in hand with this heavy thing... And that's all the extra work you need to do! Tighten the piston adjustment bolt towards the + and buy a new bolt for the vertical tilt. Oh pro tip: test without the monitor attached sitting down and see if you like the placement. Originally I had mine mounted center on the desk and well that didnt work at all. Now its off center to the right. Also use the included package foam to check clearences. I balanced the foam on the end of the arm and it worked great as a reference piece. As for mount itself, the mounting plate included does fit the odssey's metal cup plate, use the included black screws with a screw driver. Just be sure to tighten "everything" down. Don't skimp on this or locktight if you have it. Overall everything is thick aluminum or cast aluminum so its solid metal. The pressure plates are thick steel and well painted. Everything fit together without any extra work. The desk pressure plate is only held on top of rear vertical bolts by gravity. Its very jank but works the part when tightened. The plastic cable covers were a pain but doable. The biggest gripe I have is the janky L bracket. There are four thick screws holding it together and its not flush or a perfect 90 degrees in the back. So if your desk is against a wall like mine, it won't be the most ideal... I didnt add the plastic cover to save on an extra half inch clearence against the wall. I really dislike the screws on the L bracket. I had two of them strip out with mild pressure. In the future I'm going to redrill the holes and add proper bolts to secure it. The extra added effort was worth saving $300 over the other expensive option. I'll update this review if anything changes. For better or worse.

Really impressed with this monitor mount. The build quality feels solid and sturdy, especially for the price. It holds the monitor securely with no sagging or wobble, and the adjustability makes it super easy to get the perfect position. It’s been absolutely perfect for my sim racing setup being able to move the screen exactly where I want it made a huge difference in comfort and immersion. Definitely feels like a premium product without the premium price tag.

Getting everything set up took a bit of time and patience. The adjustment system wasn’t the most intuitive at first, and I ran into some confusion while trying to dial in the right positioning. However, after working with it for a while, I was able to get it pretty close to exactly how I wanted it. One thing to note is that making very fine adjustments can be a bit tricky. The mount is also slightly wobbly, and it’s fairly easy to bump the monitor out of position if you’re not careful. It’s not a dealbreaker, but it’s something to be aware of if you prefer a perfectly stable setup. That said, the overall construction feels solid and well-made, and once it’s in place, it does its job effectively. For the price and functionality, it’s a reliable option that gets the job done—even if it takes a little effort to get there.

Great screen, beautiful colors. While not top of the line product, it's performance is quite good even in heavy games like Flight Simulator. For the price, it's a steal and a no brainer. You want good quality without breaking the bank, This is what you need. I strongly recommend it.. Very happy with this purchase.

The mount not fitting into the screen back it’s bigger What could I do ?? Samsung g9 49 inch curved

Excelente producto precio-calidad, fácil de instalar.

Solid. Works well

Very strong.it has been bery long time. Holding my 49" monitor.