VEVOR Wood Chipper Shredder Mulcher, 7HP Heavy Duty Gas Powered Engine, 2” Max Diameter 212cc 4.1 kW, 4-Stroke 3-in-1 Woodchipper, Fast Chipping Chopping for Forestry, Gardens, EPA Certified

This device is a game changer! I am surprised how well it works for a machine in this price segment! I just chipped a whole bunch of green waste, including palm fronds and similar stuff, and it worked speedily and without a flaw. That is pretty impressive. While palm fronds may not seem tough, they have a tendency to warp around and clog up the chipper. In fact, a chipper I previously used that cost literally more than 10x as much, had major problems with that sort of stuff. The only thing I do not like about this chipper is that it is very difficult to open when it does clog up (and they all clog up every now and then). While more expensive machines may have a quick-latch system, this one you have to basically disassemble and open a bunch of screws (can't recall exactly, but I would say maybe 10?) You turn into a mechanic, rather than just a cleaner. So, whenever it does clog up, you are not in for a good time. But then again, the machine is just over $500, while most similar machines I saw that are any better are more in the $5000-7000 range. For that, I can unscrew a bunch of screws every now and then. Heck, if this bothers you too much, you could buy a half a dozen of these machines and just switch when one clogs, and you will still be way ahead as far as expenses go ;-)

UPDATE: VEVOR resolved issue. The machine works fabulously! Eats 2-2.5" limbs like candy. Starts first pull. Happy to have earlier issues resolved. Motor froze on third use. Chipping chamber filled with oil. Sent video and stills of oil. Vevor support is non-responsive. Support keeps saying they are reviewing my "claim" and I should wait 48 hours. (How many times should I wait "48 hours"?) This product would have been a 5 star review, it worked well when it worked. Sadly the motor failed and Vevor support has not taken any action in a month plus. WHERE ARE YOU VEVOR? This is a $550 machine that should offer years of service, not three uses! Below is a summary of the notes I've received from VEVOR regarding my chipper: On June 7, 2025, VEVOR confirmed receipt of my video and stated that a relevant ticket was created, and their colleagues would reply within 24 working hours. Another email on the same day indicated that my request (2412171) was updated, related to the chipper shredder stopping, and the pull start being inoperable, with a request for pictures or video. VEVOR confirmed receipt of attachment information and advised me to notify the agent/customer service. On June 8, 2025, VEVOR confirmed receipt of my feedback, noted I had communicated with their email team, and set the relevant ticket to open status, with a reply expected within 24 working hours. On June 12, 2025, VEVOR acknowledged my chat regarding the chipper shredder issue and confirmed they would urge their team to send a resolution as soon as possible. On June 18, 2025, VEVOR stated their team had already responded to my concern via email and advised to reply directly to their email if I still needed help. On June 19, 2025, VEVOR suggested a pull tray could solve my problem and offered to send it for free, asking for my shipping information. On June 22, 2025, VEVOR acknowledged the wait and stated they would continue to follow up with accessories, delivering them once received. On June 25, 2025, VEVOR apologized for the inconvenience and requested pictures showing the specific leaking point. On June 26, 2025, VEVOR apologized for the inconvenience and stated they were urgently confirming and analyzing my problem, anticipating a practical solution within 48 hours. They also noted that their team had responded via email and to reply directly if more help was needed. On June 28, 2025, VEVOR apologized for the product problem and asked me to check if the oil plug was tightened, providing a link to a file. If the problem persisted, they asked me to contact them again. On June 29, 2025, VEVOR acknowledged my message, stated they were following up on my question, and would reply as soon as possible. On July 1, 2025, VEVOR asked if I needed to continue waiting for pull tray accessories, stating they could solve my problem. On July 2, 2025, VEVOR stated they were in the process of further confirmation and would respond within 48 hours. They also informed me that the video I provided was not clear and asked for it to be provided again, offering several ways to send it. On July 4, 2025, VEVOR confirmed they had received my video and fed my question back to the relevant department, promising to contact me with a solution as soon as possible. On July 5, 2025, VEVOR stated they were processing my issue urgently and would email me with a solution within 48 hours. On July 6, 2025, VEVOR again stated the video link provided was unclear and asked for the video to be provided again, suggesting sending it to [email protected] with my order number in the subject. They also sent a follow-up email confirming they would get back to me soon. On July 8, 2025, VEVOR asked for a video of the power abnormality, stating my feedback was about a power problem. On July 9, 2025, VEVOR stated they had forwarded my question to their technical staff, who would reply within 48 hours. On July 12, 2025, VEVOR apologized for the waiting, stated they were analyzing the problem, and would provide a solution as soon as possible. Later the same day, they thanked me for my understanding and patience, stating they would contact me as soon as possible with the latest progress. I have several Vevor products that perform well. I expected better when I bought this.

This machine works very well. I ordered it to replace an electric Wood Chipper Shredder Mulcher which could not handle the job. So far this has performed flawlessly. You have to respect the limitations of this machine and work within them. Wet leaves and branches that are too big will not work well in any Wood Chipper Shredder Mulcher. I purchased the Vacuum hose for it and it sucks up dry leaves and grass clippings and turns them into mulch with no problem. So far I am very satisfied with my purchase.

It didn't work for mulching leaves, which is why I purchased it.

This unit weighs about 50 lbs more than the others in the same price range. There are 2 chipper blades on the flywheel instead of one. The bolts are grade 8 steel or higher, which really surprised me. Overall, it's built like a tank. I had 7 medium to large deciduous and pine trees worth of brush to remove, and I considered renting a larger shredder from Home Depot. In retrospect, I made the right choice by buying this machine. The job took me about 20 hours of work, spread out over three weeks. This machine handled the task very well, and helped me to chip several cubic yards of mulch, greatly enhancing the property. It took me more time than it would have taken to use a large rented shredder, but I have the machine now for smaller future tasks. The engine seems solid and had no issues with startup (easy to pull), throttle control, or performance under load. You have to be careful with branches over 2" in diameter, especially when the wood is harder or wet. You can stall it out if you don't feed slowly or use enough throttle, but overall the machine performs extremely well for the price. I would buy any of Vevor's other products without hesitation after seeing how this 'lil monster performed.

Wasn't sure what to expect....I'm tired of bagging 50 bags of leaves to clean my yard so was in the fence about buying a chipper. Saw this model was $100 off so bought it. Box came damaged and on its side so I figured it would be going back but other than a small bend in the chute flange it was good. Took me about 20 minutes to set up...not difficult. Got some oil and slethanol free gas and fired it up. Started on second pull...it is loud so ear protection is a must. It comes with a nice size bag but the cinch string is very weak. Attempted to attach bag and realized the way it mounts is a very poor design. At first would not stay on but after tugging and adjusting it did. Started it up and moved the throttle to middle speed and started. It takes a bit to figure out how to feed it as it is a little nerve racking and at first I was shoving to much in. You need to feed in small amounts and let the machine feed them in ...once you get the hang of it....it works very good. I still got stuck a few times but I used a thin stick to my be the leaves around and it just sucks everything in. For what I need, I am very happy with this chipper. Four stars because of the discharge chute mounting (I have to get creative here because it is a bit frustrating) but really impressed with the power and ability. Did half the yard which is normally 20 or so bags ...did it in two and a half. I did chip some 1.5 sticks and it sucked them right in no problem. Very impressive. Thanks for reading.

This thing is a beast. Very heavy. Super sturdy. Excellent fit and finish. Requires grunt work to assemble but fairly easy. I would not recommend the order of assemble as per the manual. Install the axle, wheels and front supporting leg first. Tip the machine up on its wheels and install small chute. Then install the handle on the main chute first to avoid the real possibility of accidently dropping a bolt or nut down into the machine. Then install the main chute and handle assembly. A 10 and 13 mm socket, ratchet and ratcheting wrench come in handy for assembly. This is a premilitary review. I have not run or used the machine yet.

needs a hitch to be pulled with lawn tractor.