MEIQIHOME King/Cal-King Mattress Vacuum Bag, PA+PE Material, Heavy Duty, 94.5" x 98.4", 80% Compression, Double-Zip Seal, 5 Straps, Ideal for Moving & Storage

Worked great for securing the bed. The straps that it came with are not that durable so get some of your own.

This works absolutely amazing! I was hesitant to buy this because of some of the bad reviews, but I went for it anyway because it seemed like the best option out there, and I needed it simply to get my mattress outside to the curb for trash pick up. After using it and it working perfectly, I can confidently say that those bad reviews are USER ERROR!!! I did this on my own (king size bed) and it was quite a task, so I would definitely recommend two people for the rolling process if it is a queen or king mattress! So to start... It was easy to slide the mattress into the bag, but make sure you give yourself enough room!! The bag did catch on my dresser, and I got a little scared, but the plastic is thick enough that it didn't put a hole in it thankfully, and it didn't jeopardize the integrity or strength of that area! Once it was in, it took about 5 minutes to make sure that I was securing the zipper properly and evenly. When opening the box, make sure you do not overlook the small white piece that you use once you have hand sealed the bag! It took care of small spots that weren't completely sealed that I overlooked and definitely would not have found without it! Once it was sealed, I turned on the vacuum and it took about 10 minutes for it to vacuum most of the air out. I then moved the mattress (much easier to maneuver at that point) to my living room floor to finish the vacuuming and rolling process. I recommend stepping on it, especially at the sides, for quicker progress to force air out faster without burning out your vacuum motor!! That only took an additional minute to finish the vacuuming process. Here is where you need two people for a queen or a king size mattress. Make sure you tuck it nice and tight at both ends and the middle at the same time and as you roll hold the edges on either end so it doesn't unravel! If you don't roll it tight enough, the straps will not fit around it! The straps are adjustable so it doesn't have to be rolled to a certain size, but it does need to be rolled tight!

Unfortunately, this vacuum bag didn’t work for me. The material feels flimsy for the size of the mattress. I wouldn’t recommend this one. The idea is good, but the quality just isn’t there. The bag seemed fine at first, I vacuum-seal my king mattress and it was all compressed and all tied up. It was easy to move and made storage easy but it was leaking. Definitely not durable enough for larger mattresses. I returned it and wouldn’t buy again.

This worked surprisingly well and kept vacuum until I was ready to let it expand after a move. It cost only a little more than a regular mattress bag for moving and is a very thick plastic. I figured if it didn't hold the seal, I could use it as thicker regular mattress bag. I left my cooling cover on which made it a bit thicker compressed but was still fine. My 12 inch Casper memory foam king size mattress was vacuum sealed for 1 week. The first picture is how it looked unrolled on my bed at the destination. The second is showing it rolled. I also used 5 inch movers shrink wrap which I highly recommend as an extra safety step. I would not rely on those stupid rainbow buckles to do the job and this preserves the bag for future reuse (not that I ever want to do this again). It also prevents movers from picking up the mattress from the straps which doesn't sound like a good idea. And you really only need 2 buckles if you shrink wrap it, which is nice if you broke the rest trying to get them on... I took 1 star off because the snap buckles are too small and impossible to cinch once on. Make sure the plastic adjustment buckle has a little room from the snap hook or it will crack under tension when you are trying to connect the buckle. One snapped trying to get it on which seems par for the course. You also need to be careful putting on the buckles as the hard plastic can puncture the bag if you aren't careful. Every other maker of this product does it another way for a good reason. A buckle sounds easier but is actually way harder to use for this application. So 1 star off, but the product works and the price was lower than competitors so 4 stars. It compressed well using just my Dyson v11 vacuum cleaner with the attachments off. I did a King size mattress alone but I wouldn't recommend doing it alone if you can help it. A 2nd person makes it go much quicker as they can walk on the mattress as you compress to ensure it compresses evenly. It is also much easier to roll it and cinch it with someone holding it down. I also compressed it on the bed frame which made it a a bit harder to straighten the edges out but it was doable. If you have ever used a vacuum bag before, the same principles apply here, just on a larger size. First off, ignore the instructions! Do not start from opposite ends and work your way to the middle like the instructions say. Good luck trying to get it straight if you do! Get the bag on, use 2 of the zipper things one hand following the other end to end and do it 2 times, starting by pressing on the outside zipper lining then the inner zipper lining. Make sure the bag top is as straight as possible, with no wrinkles, and the mattress is centered in the bag with as much space as you can to the zipper. Don't press too hard at first or you can rip the bag if it isn't straight. If you have ever seen vacuum sealed meat in the middle of a bag this is how you want your mattress! The easiest way to do it is to start by casually sealing the bag, then start vacuuming. Don't worry about a good seal yet. Just make sure that the area around the vacuum port is flat and smooth. Stop after the bag isn't baggy but before the mattress starts to compress and now straighten the zipper area and all sides. Make sure the mattress is not pushing up against any of the sides. That's how these these bags pop when you roll them! Don't worry about the seam in the middle of this particular mattress bag. Mine was twisted on the bottom which I thought was a problem. It wasn't. What could have been a problem was me trying to move the mattress too much while it was still on a bed frame! Try to smooth out any wrinkles as much as you can, then carefully zip the bag starting from the outer zip line then the inner one with two zipper things one after the other. Now pinch with just your fingers. If the bag is not aligned, use the zipper things again until pinching with your fingers has no effect. Now compress like crazy, stopping to even out the mattress, and smooth out wrinkles as much as you can. Last note, this bag fit a 12 inch king mattress with a cooling cover perfectly. I am not sure if would work for a similarly sized Cal King, which is longer. I recommend it if it is a good price. If not, go with their competition that doesn't use a stupid buckle. Take your time and have patience and admire your rolled taco mattress when it is all done!

This worked as easily and well as we could have hoped for making moving a heavy king sized foam mattress an easy task. Once it was rolled up, we strapped it to a hand truck and easily rolled it to the truck. On the other side as we struggled up some stairs and down a hall we started to hear the hiss of the seal breaking, but that was while we were being very rough with it, so no surprise. The straps kept it from getting and bigger, and then it quickly expanded once we full opened the zippers. If you are going to view this as a one time use item to get a big job done, then I think it will serve you well and be worth the cost.

This product is a waste of time and money. It has slow leaks and so where do you suppose to patch it? Worst yet after you bought and spent the time to put on your king bed and only a day it is leaking? Even if I get a refund do I get a refund for my time too to cover my king size bed and deflate it only to find out it gives me slow leak? Luckily I am doing it now what if I waited until last minute to do this only to find out it is leaking during transit? I am not sure with this type of products one can get a vacuum bag that guaranteed won't leak?

Difficult to handle and easy tear.

The bag is amazing the thickness was perfect and it was a great fit, but, be very careful as you are slipping it on the mattress , we did not notice as we were putting it on we made a tiny hole in it , i had my scissors in my apron pocket 🙈…and we had to double up on straps , for that size bed I say maybe longer straps but not a problem we had extra rope . I had a king size pillow top mattress and in the video I was only half way done it still flattened out more … only thing is i believe because it was a pillow top we had trouble rolling it . It was a bit to stiff… Not sure but we made it work….we made it into a taco lol.but great buy and highly recommend it.

Didn’t think this would work on a king size mattress but it worked like a charm. Amazing. I was trying to figure out how I would get a king size mattress down 2 flights of narrow stairs , and this did the trick. I recommend it for sure . My everyday vacuum worked on it.

It is a poorly made product. We followed the instructions step by step as described in the product details, compressed the mattress, and fastened the straps. Before even placing it into storage, it started leaking air from one side. Then, as soon as we put it into storage, the straps broke and the mattress returned to its original shape. You also can not return it because after 1 hour it's totaly being garbage.

This vacuum bag is absolutely great to return foam toppers that have been expanded and need to be returned or stored! It works very well, however, the instructions are very limited on how to use the bag and I recommend that you go to YouTube before and watch several videos on how to us3 a vacuum bag. Secondly, this is a two person job, as you vacuum out the air, you need a second person walking over the mattress in order to accelerate the removal of air from the bag. Third, if you do not have a shop vac, your vacuum cleaner may shutdown because of overheating and will have to wait until it cools down to finish the process. This storage vacuum bag is a must to return foam toppers. I recommend you purchase one, to save you time and pain, Great product!

Worked well, no real issue other than minor minor deflation but straps are maintaining, wish straps were easier to tighten but they work well

got this because of moving a purple mattress witch is extremely heavy and hard to move , worked great just need a very strong vacuum to suck out the air.