iCubeSmart 3D Led Cube DIY Electronics Kit 8x8x8 Led Cube DIY Soldering Project Kit(3D8S-MULTI)

I picked this up as a DIY electronics project and it turned out to be a pretty enjoyable build. The instructions aren’t bad on their own, but they include a link to a video and that made things much clearer. I’d definitely recommend watching that before you start. The build itself takes some patience, especially getting all the layers lined up, but that’s part of the fun. One thing I strongly recommend is following their testing method exactly as described. Don’t improvise here. Once it’s all put together, it’s a really cool display and a nice little showpiece for the desk. Overall a good kit, just take your time and stick to the instructions when it comes to testing.

I bought my Icubesmart 3D8S RGB Nov of 2018 and it sat on my office desk until last week (mid Feb 2020). The soldering is pretty simple but tedious. Connecting each panel to each other properly takes some patience. The documentation, as people mentioned is seriously lacking, especially with the Windows based applications. I had OCX discrepancies and trying to follow the "non english" picture directions (which didn't match what the installation program was even doing) drove me batty for 2 days. I tried on an HP Win10 laptop and an HP WinXP laptop. The programming application would not load on the XP, but it ran when I extracted the cab files to the same directory as the executable, which was a shock to me. I was able to locate the proper XP driver for USB programmer too. I never got either to work on my Win10 laptop. After 10 different solder repairs (I fancy myself a pretty decent solderer, I don't know why the thing doesn't stay together), the cube worked, and I was pretty happy with the different pre-loaded displays. But, no rain. I wanted a cube just for the rain effect. Ok, time to learn the "Make your own Displays" program". Wow, how horrible. But, I was able to open the existing example files and reverse engineer how the application does what it does. Now to the programmer. What a POS. I have to keep hitting the program button in the app and quickly attach the 5v wire before it times out and fails.... lather, rinse, repeat, over and over. Just frustrating. I even bumped the baud down to 9600. I can always eventually get it to work and I am able to upload my own written displays. I will probably modify the connector with a small toggle switch on the 5v wire. You have to seriously think out the timeline of the display you are making. I spent a lot of time running the "debug" to test what I had just wrote, and it would always crash ofter 5 runs. (Not the app, just debug, I would have to save the display, exit out of the program and restart it.) If you make a mistake in the middle, it is so time consuming to try and fix. Too bad there isn't a share repository for icubesmart hex files. (Hex files created by other LED cube programs are not compatible, yes I tried). It, would have been great if I had bought the model that had an audio input. One last comment, after dropping Windows for mac years ago, it would have been nice if there were mac apps for it or it was able to be easily connected to an Arduino. With all the shortcomings, I still give it 5 stars because, it's pretty cool. I have spent 2 days writing and testing my version of "Rain" with splashes, and it looks phenomenal in low light settings (The iPhone video does not do it any justice). I was thinking of next going for the 16x16x16 RGB (voltage color changing) LEDs next, but, wow. not going to do that.

The lack of stars on this particular review is a good thing. It's a very good challenjt if you're looking for one. The documentation is great and you can plan on spending a week (at minimum) to complete this project. It's not hard, it's just time consuming becase of the number of "welds" required. The sky is the limit with the included USB interface and software to create your own animations. Again, I didn't say easy. I'm not a patient person however the end result was extremely rewarding. I ran mine 24/7 for a couple of month and it was rock solit. I hope that you find the same rewarding experience. Well worth the cost.

First off, if you're looking for a project to practice basic soldering skills, this is not what you should start with! This is an advanced project that requires a massive amount of soldering anode-to-anode and cathode-to-cathode of LEDs. If you have some experience with soldering electronics kits, this one is well worth the effort. It took me 12-16 hours to complete, although I'm still troubleshooting a few LEDs that I didn't solder well enough. Make sure you check your solder joints thoroughly before you begin assembling the eight layers into a cube! Trying to weasel a soldering iron and solder into the center of the cube to repair a broken solder joint is... frustrating. If there's one thing I would do differently, if I were to do it again, it would be to make certain each connection had a very strong solder joint. I highly advise buying the acrylic case for the cube, because it requires the protection. As I mentioned previously, the solder joints are delicate, and unintentional jolts and bumps can break them. Be careful when moving the cube from place to place - pick it up and set it down GENTLY. It's a good idea to find a semi-permanent location for the cube, unless you want to constantly remove the acrylic case to repair broken solder joints. This is cube is SO cool. Plugging it in for the first time was extremely rewarding. The built-in patterns are awesome, and there are plenty to choose from. It's bright and looks amazing in a dim or dark room. Caution: if you have a seizure disorder, you want to be careful with this! Some of the patterns are pretty intense. Perhaps most important, it's a project that keeps you fully-engaged from start to finish, which in an age of pandemic stay-at-home orders, is a really good thing! It did a great job of distracting me from being stuck in the house. I would buy this again in a heartbeat.

The packaging was clean and everything was labeled sufficiently. The cut-outs in the PCB made the whole process faster and the end product much cleaner. Fare warning tho there is a lot of soldering that you have to do! This is a soldering project. But it is a relatively easy soldering project and you are at very little risk of damaging any electronics. This kit was gifted to a 14-year-old boy that had some previous experience with soldering, he put this kit to gather in 2 weeks with about 20-25 hours of work; might take longer if you don’t have much experience with soldering. He found it very satisfying to finish. He had a little trouble getting the software but after Emailing the company(email address in instructions) They responded within 1 business day with all the information, instructions, and software to program the cube. He was able to set up and use the software after reading through the instructions. He made several custom programs and successfully uploaded them to the cube. This was a great overall project that required some learning but was overall successful and fun!

This soldering project takes a little bit of patience, but it's a great learning tool with a cool outcome. I love that it allows you to practice. It makes a great gift for older kids. I got this as a gift for my nephew along with a soldering gun and it was a great buy. It looks simple when you open the package but it's a patience builder for sure.

This electronics kit is a good way to do what's advertised - make pretty lights do cool things. It takes many, many hours to complete. It's quite tedious, but I can't see how it wouldn't be. My main issue is with the instructions. They were difficult to understand, and skipped around at times. Knowing what I know now, I could have completed it easier if I did it differently.

This is a 8X8X8 LED Matrix Cube incorporating 512 Single color RGB LEDs for displaying various colors and patterns. This LED Cube was built using iCubeSmart 3D Led Cube Light DIY Kit from Amazon. As you can see in the pictures that there is a lot of bending LED leads at right angles required, thus took couple of days just to create the 8 layers of LED matrix and solder the 512 LEDs. You do have to take time & patience to do it right as it helps. Fixing broken LEDs after assembly is not easy. Most of the other components were relatively easy to setup as the main board was already soldered ready to use from factory. It also acts as a template to solder the 8x8x8 LED matrix. The unit comes with firmware pre-loaded via the HEX file from factory with default animations that you see in the Video. If you are technically inclined you can also Program the Micro controller IC STC12C5A60S2 using HEX file firmware which BTW can also be modified (if needed) by the animation software (download it from a google shared drive as described by the seller) and using a USB to UART CP210x Bridge included in the Kit. The cube runs on USB 5vDC power. It needs more than 500mAh at times (Depending on the animation) and you may need 5vDC 2Ah power adapter for reliable operation. Bottom-line: It is after-all an electronic toy, thus very bright and colorful. It does have some glitches once in a while and the cube animation hangs & the included animation could use some TLC but overall a satisfying long project. Actually, it is much more easier than you think! - Enjoy the light show! Rating the product with four stars!

Cool

assemblage facile, notice bien détaillée, soudure facile et pcb de très bonne qualité que du plus et surtout très sympa à regarder, je recommande vivement. Il faut un minimum de patience quand même, comptez 8h pour le pliage des led et les soudure...

Assemblage pas forcément pour les novices non équipés (petites soudures minutieuses), mais une fois construite la structure permet une infinité de possibilités, paramétrage du cube pas très bien guidé ceci dit.

Bonjour, Super vendeur,cube en fonction. Je pense acheter le nouveau modèle. BRUNO

Acheté comme cadeau pour un garçon de 16 ans. Il faut beaucoup de patience mais il a adoré.