Deco BE25 BE3600Mbps Whole Home Mesh WiFi 7 System, 688 Mbps at 2.4 GHz + 2882 Mbps at 5 GHz, 2 × 2.5 Gigabit Ports, AI Mesh WiFi Booster, MLO, Alexa and Google Assistant Supported, HomeShield

⸻ Exceptional Wi-Fi Performance with TP-Link Deco After experiencing poor Wi-Fi signals throughout my home and facing limitations with conventional routers, I decided to take control of my home network. The TP-Link Deco system offers flexibility with both Access Point (AP) and Router modes. Opting for Router Mode, I strategically placed three Deco units in a triangular formation, ensuring comprehensive coverage across my entire house. Easy Setup Process The setup was straightforward and user-friendly. I connected the primary Deco unit to my ISP’s router using the provided Ethernet cable and followed the instructions in the included leaflet. The Deco app guided me through the process, making it accessible even for those with minimal technical expertise.  Enhanced Wi-Fi Performance With this configuration, my home now enjoys robust Wi-Fi coverage, eliminating dead zones and providing consistent speeds throughout. The Deco system intelligently manages connections, ensuring optimal performance as I move between rooms.

This mesh system has significantly improved my home Wi-Fi. I’ve seen much stronger coverage throughout the house and faster speeds overall. Where I used to struggle with weak signal upstairs, I now get consistent and reliable performance. The Deco units are easy to set up using the companion app, and the process only took a few minutes from unboxing to full connection. The design is modern, and each unit includes two Ethernet ports, which has been helpful for wired connections in different rooms. Performance has been very stable. Speeds have remained strong both wirelessly and over Ethernet, and the system handles multiple devices well. It also supports the latest Wi-Fi 7 standard, which adds a level of future-readiness. ⸻ Pros • Consistent, high-speed coverage across the home • Simple, guided setup process, personally took me under 10 minutes. • Useful dual Ethernet ports on each unit ⸻ Things to Improve • Slightly bulky design • A wall-mounting option would enhance flexibility

I've previously used Powerline Adapter successfully throughout the house, but have now moved to the TP-Link Deco BE25 (3-pack) and I've so far had a positive experience - though there are some things to consider when purchasing. First my setup which is Fibre coming into the house - the Mesh has been connected via Ethernet cable and placed into AP mode (switching of the Mesh DHCP). 1. WiFi signal strength is highly dependent on router placement but I've consistently got about 60% (600 Mbps) out of my 1GBps connection which is connected to the Fibre router. This is for routers and devices place near the satellite Mesh nodes. But this is key to ensuring you can max out the performance. Signal pollution may also be an issue. As I live in an urban area - there is a lot of traffic on the 2.4GHz range (ordinary Wifi standard) and on the 5GHz radio range there is a bit more space. The Mesh predominantly operates here and at least in my lucky situation I don't have as much traffic. Suggest using your mobile phone with WiFi Analyzer to check your radio spectrum available. 2. WiFi 7 (maybe). Monitoring the WiFi 7 space I don't see any traffic on the 6GHz spectrum. The mesh is merging 2.4Ghz and 5Ghz bands together to increase throughput. You should expect fluctuation in latency or ping as communications are over radio vs wire (Ethernet). It would be great if you could manually select the Mesh radio channels to use rather than using the "optimization" option. 3. The app is good, but somewhat limiting in terms of some features found on other TP Link products. There is reduced ability for instance to disable WPS. The WebUI is also limited in comparison with other TP Link products I own. Overall, I'd recommend this Mesh system if you have a 1 Gigabit fibre line. The Mesh is doing some pretty complex things radio wise to wrap signal over an area and these units are good value for money, easy to setup and quite easy to use. I'd recommend if you're in the predicament I'm in where I can't run internal fibre, ethernet or find more performance from Powerline plugs.

Bought these as my previous extenders were not up to scratch. My previous extenders were giving me less than 1mb in my garage, with these installed I am steadily getting 250+ mb over wifi. I'm very happy with this purchase and would recommend them. Great wifi coverage all over my house - not a single dead spot ! Very easy to set up , the app walks you through setting up all 3 nodes, literally 5 minutes. The app is so easy to understand and very user friendly. The nodes themselves are relatively sleek, I've had other extenders that are quite bulky and intrusive! They may seem expensive, but think of them as an investment for 5 plus years that remove the frustrations of dead wifi spots in your house !!

I had high hopes for the Deco BE25, but it has been a very disappointing experience. The connection drops out far too often, coverage is weaker than expected, and several of my smart home devices struggle to stay connected. For a product that is meant to improve WiFi performance, it has done the opposite in my home. I expected smoother, stronger, and more reliable coverage, especially at this price point. Instead, I have had constant issues, unstable speeds, and devices disconnecting at random. Overall, I regret the purchase and would not recommend the BE25 to anyone looking for a reliable WiFi upgrade.

Good little mesh system and wifi 7 which is super fast. The parental controls are average (which you have to pay extra for) as sometimes it works, sometimes it doesn't. Main thing is that it enables me to get a full 2gig speeds.

Worked first time, coverage is excellent and speed is brilliant. I purchased this for my new EE Full fibre and wanted a signal over 3 floors, in house with a lot of walls and rooms. The setup was super easy, took me less than 30min to get all three connected and working using the mobile up which was very nice to use. Speed was impressive, we signed up for the 300mb EE service and we used one of the TP devices as the router connected direct to the EE wall ported (did not use the EE kit at all) and got 300 both wired and wireless in the rooms around the router, speed dropped off to about125mb further away so we used the second Deco as a booster in the middle of the house and that got the speed back up to 300 in the 2nd floor room. I was worried the loft would be too far but even with just the second deco we got 100mb which would be fine, but adding the 3rd deco we managed to get 200+ in the loft so we are not really seeing any issues with the mesh at all. Happy i purchased this kit!

I honestly bought this system knowing it was total overkill for my 1 Gig connection, but I was tired of the constant buffering in the back bedroom. I upgraded from an older Google Nest setup to this BE85 pack, and the difference is night and day. Setup was surprisingly painless via the app, though I do find it annoying that I can’t manage advanced settings through a web browser like on my old traditional routers. The range is ridiculous; I’m getting full signal in the garage and even halfway down the driveway now. I wired the units together with an ethernet backhaul since my house is pre-wired, and the speed tests are basically maxing out my ISP line in every single room. The 10G ports are great for future-proofing, even if I’m not using them to their full potential yet. My only real gripe is the size of these things—they are massive and run a little warm, so don't plan on hiding them easily behind a picture frame. Also, make sure you turn off the "mesh technology" toggle for stationary devices like your TV or desktop, otherwise they sometimes try to hop between nodes unnecessarily. But if you have a lot of smart home devices and want a "set it and forget it" system that just powers through interference, this is expensive but worth it.