ELEGOO Upgraded Standard 3D Printer Resin 2.0 405nm UV Curing Photopolymer Resin for Mars Saturn Jupiter MSLA DLP LCD 3D Printing, High Precision, Low Odor, White 1000g

Ótima resina para impressão 3d, qualidade 10

Veio tudo certinho, é o Standard 2.0

This resin performed well with a very smooth finished surface. I was most happy that this version 2.0 white resin cures out much whiter than the old version, which turned cream colored after curing. Also visibly better resolution.Not a great picture, but you'll see a bigger difference in real life...

In the 4 years I’ve been printing with photopolymer resin, this product is by far the worst I’ve ever tried. When I first bought it around December last year, I also bought grey ABS-like resin by Anycubic, having previously use Elegoo’s ABS-like resin in grey with great results. I used this resin first, on my Mars Pro, which after years of printing, I can’t remember the last time the print bed came up empty. Well, it did with this resin, over and over with various settings until I increased all the times by a ridiculous amount, and even then, it was spotty, and produced models with pitting and missing sections. One of the models I printed was a functional model that got regular use under very light pressure. It didn’t last a week, which compared to the model it was printed to replace that lasted over 3 months, was horrible as far as durability is concerned.So I was done with it, but it back on the shelf, mostly full and moved onto my new ABS-like resin that came at the same time. Setting my printer back to my normal print settings, the grey ABS-like printed flawlessly every time, with zero failures.So it’s over 6 months later, why am I writing this review? Well, I recently bought a Saturn 3 Ultra, and went to the shelf to decide on a resin to print a couple of parts with, and I wanted white and saw this resin on the shelf in white, grabbed it, totally forgetting about my previous experience with it. The photo attached is the second print attempt, after having a mostly failed first one and recalibrating my build-plate to be firmly pressed against the glass (which I normally never do) and increasing number of first layers and their print times. The first time, the part you see in the photo with the ring behind the part in the foreground was the only part to adhere to the print bed; has a long flat arm that prints against the plate surface, but it was mostly hanging from the build plate, finishing with a curve in it as a result. On this second attempt, the entire arm adhered to the build plate. The nozzle part in front of it almost printed correctly, but you can see there are holes that don’t belong towards the tip of the nozzles at the bottom. There was supposed to be a second nozzle part printed directly next to this one, but as you can see, it obviously never took to the build plate. Anyway, these experiences reminded me of why I shelved this resin last year and never touched it, and so why it was almost full when I grabbed it, which was clearly a mistake. I hate to waste resin, but unfortunately this bottle is probably best placed in the nearest trash receptacle.Total garbage waste of money. I recently ordered the 3.0 resin, which, coincidentally arrived as I’m writing this review. I suppose I will soon find out if they fixed it to be a good resin again. 2.0 was a total miss.

Muy buen producto, y lo mas importante para mi, es que llego muy rapido.