Fieldpiece SM482V Wireless 4-Port SMAN Refrigerant Manifold with Vacuum Gauge – Air Conditioning/Refrigerant Digital Gauges for HVAC & Refrigeration | With Vacuum Gauge – Air Conditioning/Refrigerant Digital Gauges for HVAC & Refrigeration

What can I say? It's Fieldpiece, so obviously a high quality set of digital gauges. If you DL the joblink app, you can monitor the gauges on your phone, which is handy if you're in the attic with a coil, trying to monitor subcool or vac or whatever from the gauges outside.

Excelente producto funciona excelente

Works great. Upgrading my entire AC setup so I'm ready to go into business when the time comes. This manifold I paired with the Fieldpiece Joblink set which includes the wireless air temperature sensors for return/supply, pressure sensors for suction/liquid, and temperature clamps for suction/liquid.One issue I had initially was on system vacuuming, and I almost returned these for the 3 port SM382v, but decided against the return. The issue is present when using hoses and manifolds that have had refrigerant ran through them. When pulling a vacuum, refrigerant will start to evaporate at inconsistent times. This leaves you wondering if that 5 micron delta/min on a decay test is a leak or not. Most of the time, it did a great job of pulling down to 200 microns (manifold side) then on closing the manifolds vacuum port, we'd shoot up to about 350 or 400 while it equalized. After equalizing, we'd see a constant ~2 to 5 micron rise per minute.Other times, I'd get down to 400 microns and pop back up to 520, and it would pump back down to 390 and pop back to 510, pump down to 380 and pop back to 500. This cycle repeats itself and I can't tell if it's a micron gauge fault or evaporation. It isn't a leak, because it holds solid microns, but it does pop around quite a bit. Purge with nitrogen through your manifold and lines at high pressure before starting vacuum to mitigate this.Instead of returning this manifold because of the vacuum inconsistencies, I went for the redundancy approach and got two large vacuum hoses and a wireless micron gauge, leaving the manifold for watching system charge or vacuum alternative. Although I could just use the full wireless set for that now, anyways.

Extremely quality made. Lots of features. Has vacuum guage built in, a good one. I'll update review as I use it more. I think the logging feature is important.

Getting into chillers, will definitely buy a couple more. Don’t forget your lines, I thought this came with them.

Estoy muy satisfecho con este manómetro digital. las lecturas son precisas y fáciles de ver en la pantalla. Es una herramienta muy útil para diagnóstico y carga de sistemas de aire acondicionado.Me gusta que sea fácil de usar, rápido para leer las presiones y temperaturas, y que ayude a trabajar de una manera más profesional. La pantalla es clara y la información que muestra facilita mucho el proceso de revisión del sistema.

So far so good makes my job much easier and the built in micron gauge is a plus

Good