JORGENSEN 45° Chamfer Plane with 4 Cutter Heads for Quick Wood Trimming

Excellent piece of kit and far superior to a cheaper one I was given for the job. Really works great but you do need to take your time and get a feel for the material you’re working with. The different blades are well stored in the body. The tool is nice and heavy and ergonomically shaped. The adjustment of the blades is very accurate and efficiently measurable on the gauge as you work. One negative, the metal is not sealed with and will leave a residue on wood as you work. It needs a good wipe as you go.

Excellent little chamfer tool. Feels solid and weighty. Razor sharp blade that has held up well. Comes with a straight (45°) blade and 3 radius blades for rounded corners stored in the handle. It does come with a warning to adjust the depth gradually and you need to take this advice - a single turn of the screw per pass is more than enough. I've bought a few of these Jorgensen tools lately and they are all excellent quality.

This is a great little tool that fits right in your hand! The blades are sharp out the box, and there is a handy blade storage under the handle! I've tried this tool on pine and walnut and works great on both. The only thing I would say is other branded tools have more blades for a bit more money which may be better value than this , but I can't comment that one's performance.

Works really well at small chamfering jobs or roundovers. Safer and more convenient than the router table

Fabulous little chamfer plane that's easy to use and sharpen. I especially liked the recessed holder for containing all the additional blades, and how easy it is to insert/remove the active one for resharpening. Fits my hand like a glove too!

Brilliant little tool - and the hidden storage for all the extra blades is so tidy. As a DIY-er, I have used JORGENSEN Chamfer Plane on some scaffolding boards to try and give them a nices edge and shave the area where the staples were embedded. Very satisfying working with it (outdoors, full face coverage due to splinters and small shavings flying around)

Does the job but practice before use as it need fine tuning for depth

I originally bought the slightly more expensive item that has many reviews. I returned that item twice, first because a screw was sitting proud and the next because a loose screw did not even screw in, poor quality control. On receiving this item I was impressed immediately by the quality of build, far better than the one I returned. The blades are very robust and sharp out of the box and the additional blades are conveniently housed in the body of the tool. The cutting is also far better that the other item. I would strongly recommend this tool for any level of woodworker.

Ich habe mir den JORGENSEN Kantenhobel für kleinere Holzarbeiten in der Werkstatt zugelegt und bin insgesamt sehr zufrieden. Durch die integrierte Führung lässt sich der Hobel leicht und kontrolliert an der Kante entlangführen, was besonders für gleichmäßige Fasen sehr hilfreich ist. Auch für Einsteiger ist die Bedienung gut nachvollziehbar. Der Wechsel der Schneideinsätze funktioniert problemlos und ohne großen Kraftaufwand. Besonders positiv finde ich die Aufbewahrung der Einsätze direkt im Griff – so sind sie immer griffbereit und gehen nicht verloren. Das ist im Werkstattalltag wirklich praktisch. Sehr gute Ergebnisse habe ich beim Hobeln von langen Kanten in Faserrichtung erzielt. Die Fasen werden sauber und gleichmäßig, ohne Ausrisse. Quer zur Faserrichtung oder bei sehr kleinen Werkstücken braucht es allerdings etwas Übung, da die Handhabung dann etwas kniffliger wird und man sorgfältiger arbeiten muss. Insgesamt ein solides und durchdachtes Werkzeug für Tischler, Schreiner und ambitionierte Heimwerker, das genau das tut, was es soll. Für den Preis eine klare Empfehlung, wenn man regelmäßig Kanten fasen möchte.

A truly satisfying purchase. Look at Jorgensen and feel what a quality and value tool is. I must admit I got this plane so I would stop abusing my Veritas planes. The trouble with loving a tool can be not wanting to recognize both its limitations and overqualifications. It's not that the Veritas plane will not do the job, but it feels like tool abuse. A car analogy would be: don't use your Porsche as a daily driver. But you definitely need something better than an cheap import, You want something more solid and rugged than a Corvette or Cadillac. So maybe a German car.... Okay the limits for my analogy have been hit. My ex often accused me of taking an analogy to far. Is that what a marriage is for a relationship? I wanted a plane and potentially a brand that is rugged, more commercial. It was not until I opened the box that the nagging feeling of brand recognition kicked in. When I picked up the included sticker and saw the word 'PONY that I finally recalled my shop class tools. This plane fits perfectly in my hand with excellent weight and balance. Simple and solid, it is precise. This will be tool I will love to use. This will be a tool to outlive me and a tool I will want to pass on. My Veritas will require re-homing as I seek cremation thus burial with me is out.

Zastanawiam się czy na polski rynek nie trafiają produkty o obniżonej jakości. Po.wadliwych szybkościskach teraz mocno niedopracowany strug. Tylko fabrycznie włożone ostrze ma właściwy wymiar. Wszystkie pozostale nie mieszczą się w prowadnicy. Konieczne było przeszlifowanie boków na papierze ściernym. A funkcjonalnie wygrawerowana miara na ostrzach jest absolutnie niewidoczna więc ustawiać trzeba doświadczalne. Ale kolor obudowy ma ładny. Szkoda, że to nie on "robi robotę".

Achat compulsif. Pratique et fonctionnel mais je me demande comment je vais affuter les fers concaves (qui sont miniscules)

Prodotto di qualità, facile da regolare e da utilizare. Struttura solida e resistente