Kingsdun Small Torx Screwdriver Set with T5 T6 T7 T8 T9 T10 T15 T20 Security Driver Bits for Macbook/Xbox one/Xbox/Controller/PS3/PS4/HDD/Computer Repair

A lot smaller than I expected but that is on me. Due to the small size, they are hard to manipulate to remove/install screws. The end of every one I used has bent or rounded off the star. Would only recommend for a one and done application because that is about all it may last.

When I inserted and turned all it did was take the corners off the star and didn't turn the screw at all. Useless

If you're looking for Torx drivers to constantly use, I might give these a pass. If you just need one to act as a stop for Chicago screws and the like, these are fine. The machining isn't absolutely perfect, so one end or the other might not actually fit into the socket it's rated for and you'll either have to try the other side or hope a size up/down works.As a cheap tool to keep when you need it supplementarily, these do the job. But I wouldn't trust them as a primary Torx driver set.

These are very cheaply made. The T6 striped out the first time I used it. They would probably be fine for very light duty work but don’t expect to get anything out that is even moderately tight.

This product is similar to L-shaped Allen wrenches. I purchased them to dismantle and destroy several obsolete hard drives. Work fine. Each driver is a single piece of steel, so nothing can break off. The plastic holder is convenient to keep the set together.

It's convenient little thing to have in your toolbox, if you have to remove a safety bolt. It's one of those tools that you don't really need until you do and then you wish you had. So get it now. I usually used to work on my Leatherman

Did not like this product used it for torque screws for pocket clip on knife very hard to get out using these torque wrenches would not buy again these are not hardened steel very easy to strip

These were fine, only dosent go up to the size I needed. Unfortunately I had to guess. Wish they had included a wider size range,

I needed to do some work on an Apple Mac Mini computer and discovered that I needed a couple of screwdriver bits I didn't have in my regular computer kit. Specifically, I needed Torx TR6 (aka T6H or T6 Security).I didn't want to buy a single screwdriver for a single purpose, so I chose to look online for a kit that would meet a variety of needs related to the small fasteners now commonly being used in laptops and mobile devices.The Kingsdun Small Torx Screwdriver Set seemed to fit my requirements:- Small and compact with the screwdrivers arranged as L-shaped levers for long or short applications; ie. for tight spaces or where more leverage is needed;- Packaged in a smartly designed plastic carrier that folds to a relatively compact size, and labelled for easy identification of each screwdriver;- Screwdrivers include standard Torx T5 (no center hole), and Torx Security (with center hole) T6, T7, T8, T9, T10, T15, T20.Considering the price point, this product would be great, however, the smallest screwdrivers are useless! They are so poorly formed that they fail to establish a firm fit in the screw head sockets and create a risk of damage to the screw or driver itself.On closer examination, via powerful magnifier, I discovered that......on the smallest screwdriver, Torx T5, the flanges of the star are rounded off so much that there is no way for it to sit squarely in the socket for grip; and......on the Torx Security T6 (TR6 or T6H) the hole in the middle of the screwdriver end is too shallow to allow it to fit squarely in the screw socket for grip; and......even the larger T7 and T8 have a questionable fit and may not be useful in some situations; finally......the largest screwdrivers seem to work but are a bit wobbly in the socket at times.This is a cheap low-cost product but even at this price, I don't recommend it.

I needed to take apart some computer hard drives and needed this type of screwdriver. It covered all the sizes I needed. Unfortunately I had a few drives to take apart and by the end, I was tired of using them. If you have the odd small job, these would be perfect but it you will be using them all the time, I would get something with a screwdriver handle.

Coated, good quality holder, worked for the handful of items I needed to open. All good.

Nice small kit to have around, but the smaller T6 and lower sizes did not have a well machined hole for the security socket, so I was unable to use those effectively.

The looked longer in the picture and when they arrived the longest one was only about 2 inches or so, not ideal for applications where you have a recessed screw head