Car Sound Deadening Mat 1inch 6.54sqft Car Material

Excellent noise dampening with good adhesive backing... this particular roll is lost 16x20 inches. Overall I'd recommend

Good stuff! Easy to cut to size. Works very well quieting road noise, while keeping good sound from speakers in. Nice price too.

Good sound reduction and easy to cut and shape. My only concern is the adhesive properties. I have used the mat in various areas in the car but have noted it separated from a corner of the underside of the hood on two vehicles. Overall it has held up, so I was willing to believe I didn't prep those corners as well as the rest. It never fell off, just had the corner of the mat peal slightly off and it will hold again once i re-press it down. It's not a bad choice as I do notice the difference in sound pre and post application.

This product was great for what I needed it for! Decoupling trim panels in my car! I've used this and the Siless brand CCF and while I will say I feel like the Siless product stuck better when applied I prefer the quality of the actual foam on the AggSound product! Will purchase again! Thank you!

I used this product to go ontop of butyl rubber backed sound deadening. The combination of the two products makes the car speakers sound 10x better. Additionally it really helps with road noise. If you are buying it to use as sound deadening; I highly recommend watching YouTube videos on how to sound deaden a vehicle. You may even find a video showing how to do it in your specific type of vehicle. Overall I do recommend this product.

Needed thin sound deadening material for my cars rear package tray that was inexpensive. This worked great. Perfect amount needed to cover what I needed.

If you are expecting to be an alternative to dynamat, I would recommend another product. Adhesive didnt hold up even days after applying with proper tools and preparation, much thinner material than what I was expecting, I eventually replaced with a heavier rubber mat.

Easy to use, high quality, adheres to surface

I bought this AggSound 4 mm sound-dampening roll specifically to quiet my Bambu Lab P1S 3D printer enclosure, and it exceeded expectations. The material is dense, flexible, and easy to cut, making it simple to line the inside panels. The adhesive backing grips firmly but still allows a bit of repositioning during installation—no messy glue required. Noise reduction is dramatic. After lining the enclosure, I measured roughly a 30–40% drop in operating noise, and the harsh high-frequency vibrations from stepper motors are almost gone. The printer now runs with a deep, muted hum, which is a huge improvement for a home office or shared workspace. The roll size (170 × 33 cm) was ideal—plenty to cover the P1S panels with some left over for small accessories. The 4 mm thickness strikes the right balance: thick enough to absorb vibration but not so thick that it interferes with door seals or airflow. Overall, the quality and performance are outstanding. If you want a quieter, more professional-sounding Bambu Lab P1S (or any 3D printer or enclosure), this AggSound sound-dampening material is a must-buy upgrade.

Cut it up and used as a filler in my cat carrier mattress as that needed to be changed. Works well.

Pega muy fuerte y se nota el aislamiento. Lo use en mi coche

Come da descrizione, molto valido

Buono