Active 2.0 Electric Pressure Washer - 2.0 GPM Flow and 1800 PSI Peak Pressure, Pressure washers for Power Wash, Power Washers Electric Powered, Wall Mount Pressure Washer, Hidrolavadora Electrica

Really happy with the upgrade over big box alternatives. Very compact unit - glad I chose the 2.0 - sound level is reasonable, pressure is solid - pump only activates when squeezing the trigger, etc. I would recommend a short gun and you definitely need a real hose - the one in the box is too short to do anything useful - although it does seem of good quality.

I did my research on this power washer before buying, and this power washer is one of my favorite purchases in a while. I specifically purchased this power washer for washing the cars. I was at the point where I was getting tired of dragging the power washer on wheels from the garage and setting up everything before I started to wash my vehicles. For those of you that know what I'm talking about. Well I got there too. It was time to put together a wall mount unit for the garage. When the package arrived. I was really impressed at how small it was. It only weighs 12lbs, and its the only 2GPM power washer I could find south of like $700. The unit came with a long wand, foam cannon, your typical spray tip sizes in 3.7 orifice and like a 25ft cable. I was not interested in the peripherals, as I had my own products already, but if you didn't have anything it would be a good start. Not sure if that foam cannon is any good, but you can pick up a sweet deal here with the bear force ones. The SS one is like 38 bucks https://www.amazon.com/BEARFORCE-Stainless-Connector-Adjustable-800-5000PSI/dp/B0CDVYDKLT?ref_=ast_sto_dp&th=1 I paired this unit with the Mekoh wall unit found here https://www.amazon.com/dp/B0D9GQPNN9?ref=ppx_yo2ov_dt_b_fed_asin_title I originally purchased this wall mount with the holes in it because I was going to tie wrap and or put brackets on the shelf to keep it from falling off, but then I found these 3m feet to sit this unit down in for like 15 bucks on Etsy that worked even better. The unit goes no where and is rock solid. Just FYI. Should you go that route. Make sure to have everything lined up before taking the tape of the 3M stuff, because once it touches the shelf. Its set. The reel I went with was a 100ft coxreels here. https://www.amazon.com/dp/B004E3W4QW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 This thing is built like I tank and I love it. I went with OG 50ft hose, 6.5ft garden hose, and 3 ft jumper hose. Some of the fittings you will need if you like the setup are: Quick disconnects https://www.amazon.com/dp/B0CT29YPFN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 90 street elbows https://www.amazon.com/dp/B098NCKW2Y?ref=ppx_yo2ov_dt_b_fed_asin_title Garden hose quick disconnects https://www.amazon.com/dp/B09PFNF8KH?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 I highly recommend this power washer. It runs at about 1050PSI 2GPH. It really takes off the dirt off the vehicles and the foam from my foam cannon is tremendous. Not to mention when I get ready to wash the car. I just turn on the water and the power washer and I'm washing inside 2 minutes. I cant tell you how much that makes me smile. I should have done this years ago. Another tip about this power washer is that its not load at all compared to that floor unit from Sams I have had for many years. It has a pleasant hum. Just a tip. Do not pair this with a Uberflex hose as it will cause surges and possibly burn up the motor. Only use steel braided hoses.

Tout est parfait une belle bebelle pour de qui est du rendement cependant l embout pour fixer le boyaux d arrosage devrait être en Stainless. Et le boyau n' a pas 20 ' mais plutôt 16'. On a dû racheter un boyau plus long afin d être capable de faire le tour du camion

Been using the Active 2.0 pressure washer for detailing my 2025 GMC Sierra AT4, and after three washes, I’m really impressed. Paired with an MTM PF22.2 foam cannon, this thing throws out thick foam and delivers consistent, high-pressure output without bogging down or fluctuating. Setup was easy, startup is smooth, and the build quality feels solid — especially at this price point. I’ve used it with both GYEON Foam and CarPro Lift, and the results have been excellent so far. No leaks, no overheating, no complaints. I’ll be moving to Montana within the year, where it’ll face colder weather and heavier use, so I’ll plan to update this review after a full year of service. But based on current performance, this pressure washer is more than living up to the hype.

Great pressure washer! Solid pressure, I am able to pull 2.0 GPM with the provided attachments. Only upgraded to the steel braided hose from Active. I have my thoughts about it but I will say, overall, a really nice machine.