Gas Lift Cylinder, Class 4 Piston Office Chair Gaslift Replacement

Cheap and cheerful, sorted my gaming chair out as the factory cylinder was flacid 😂 The replacement is nice and stable, went for a slightly longer stroke as the original height wasn't that great. Fits perfectly as expected, need to use a decent hammer to smash the out one out depending how long its been in there, mine took a little fight to get out. But fitting the replacement was a walk in the park. Perfect

Really great. Chair is now better than new.

Fitted our old office chair perfectly and works well. Very easy assembly of the new canister - but only once we had removed the original canister, which took a lot of hammering to get out.

Great delivery time and great product

Measure twice buy once. This is a piston for a higher sitting position. Lowest is about the same as the highest position of a normal office chair, highest is more of a bar chair position. Anyway. We couldn’t get out the old one in the 80€ chair I bought when Covid hit, so bought a new chair at a store nearby BUT put in this piston (because of my height and weight). The old piston gave up on me all the time. Not good for sitting and overall posture when sitting long hours. I knew that I would need a piston that is capable of a bit more weight than the 110kg every chair I looked at seems to offer. So this part will hopefully last longer than 5 years and keep me comfortable at my desk. And since the lowest is exactly the height I need to sit comfortably it should not sink.

First of all, this is a great product and really strong. I bought it for my old DX Racer King chair and it incredibly strong, and more than capable of holding my 22 Stone self without issue. However, and this is probably my fault but I've never bought a gas strut before, it doesn't sit in the base as far down as the original and it is much bigger. Because of this minimum height I can barely get my legs under my desk, and at maximum height I can't touch the floor. It makes my chair like a bar stool. And at 6 foot 1 inch, I'm not exactly short. Good and strong though and great value.

Excellent service and quick delivery. It has given my office chair a new lease of life. So easy to fit in less than five minutes. I've only been using it for two weeks and no problems so far.

Perfect fit for our home office chair. Very easy to install, bottom and top just mate directly with the base and seat of the chair. Removing the old cylindar took a bit of effort with a rubber mallet but this new cylindar fitted very easily. It is quite tall when fully extended (maybe too tall for some, check your requirements) but even at max extension feels very secure and stable.

A high quality replacement gas lift cylinder for office and gaming chairs. This part allows one to extend the life of an adjustable office chair for years, rather than sending the chair to the landfill. A simple process to remove the failed cylinder from a chair and install the replacement within minutes. This particular part is heavy duty to support higher than standard weight and lifts taller than most standard cylinders and should last for years.

So my Real Space DRG gaming chair was sinking. I read the reviews and checked that my chair was compatible with this Cylinder replacement. Google told me that my chair had the most common cylinder with a 2" (50mm) base. I ordered this Huiguli cylinder to replace my old one. Taking the old cylinder off was a little tough, as mentioned in many other reviews. I tried to hammer the swivel base with casters off the chair, but had no room to work and no luck. So, I unscrewed the baseplate from the chair. I turned the base upside down in my workbench and proceeded to knock out the old cylinder with a hammer. I destroyed it, because I had to hit it so hard and directly in the center to dislodge it from the base. But that did the trick. I then used vice grips to grab hold of the old cylinder and turned & "unscrewed" it from the base. The new cylinder was simple to put on. After screwing the baseplate back onto the chair, I then replaced the old plastic cylinder protector onto the new cylinder, then slid the cylinder into the baseplate. I then replaced the old base with the casters. The new base is fantastic. I have no evidence of durability because it is brand new. But, it works great and goes "extremely" high if needed. It is a little higher than the old base at it's bottom position, but that is fine, as the old one was very short at it's bottom position. I am extremely happy with my purchase, that came within 6 hrs of ordering. It sure beats having to buy a new $400+ big and tall chair.

Length is not 17 inch, it is 15 inches

Très facile à changer, permet de changer la hauteur du siège à conseiller,

La qualità buona.