GIGABYTE B550 AORUS ELITE AX V3 AM4 AMD B550 ATX Motherboard with Dual M.2, SATA 6Gb/s, USB 3.2 Gen 2, Wi-Fi 6, 1GbE LAN, PCIe 4.0

La tengo desde hace 2 meses y no me ha presentado ningún problema, llegó en perfecto estado y tiene todos los puertos y conectividad necesarios que por el precio me parece una muy buena opción en comparacion con otras

This motherboard delivers a great set of features for the price, but with a few minor things worth pointing out. The RAM slots are very close to the CPU socket, so be mindful of your cooler choice and orientation. I learned that lesson the hard way - after installing my cooler, one side of the fan shroud protruded just enough to block a RAM slot, so I had to remove the cooler, clean/reapply thermal paste, and reverse the fan orientation to make it fit. If you need to remove the stock mounting brackets for a different cooler mounting style, keep in mind that the backplate is not attached to the board. It stays in place as long as you don’t move the board, but I lifted my board while working and suddenly found myself wondering where the cooler mounting screws had disappeared to, not realizing the bracket got left behind. There were some minor quality control issues. The M.2 screws were over-tightened, so I nearly stripped them trying to remove them. There was also a USB 3.2 header issue in that the plastic socket for the USB 3.2 header came loose when I needed to unplug the cable. I was able to fit it back onto the pins just fine, but this shouldn't happen. My only real disappointment is with the M.2 slots. The board features two, but only the first one (nearest the CPU) supports PCIe 4.0 speeds. The second slot is PCIe 3.0 only, which wasn't obvious in the product description. This won’t matter for many users, but if you were planning a RAID setup like I was, it’s important to note that both drives won’t run at the same speed. I loved Q-Flash! Being able to flash the BIOS without needing a CPU installed is an awesome feature. After flashing, the BIOS handled everything in my build flawlessly - I only had to enable XMP and I was good-to-go. If you’re using a newer Ryzen CPU, be sure to check if a BIOS update is required before installation. For lighting, the board has two main LED zones - one near the I/O shield, and another with 2 LED strips and backlighting near the PCIe slots. These were individually addressable using OpenRGB in Linux. I haven’t tested RGB control in Windows yet, but Gigabyte’s software is likely needed for full customization. Overall, this is a feature-rich board for the price and Q-Flash alone makes it a great choice for Ryzen users. If you need a solid, budget-friendly AM4 motherboard that's easy to work with, this is a great choice.

Excelente produto

It has multiple IO with Wi-Fi 6 inclusive. The build was fairly easy as the choice of the case was great this board supports multiple fan, pump and rgb connections. The build quality is robust and it looks very good inside the black case with the Aorus accent on the fans.

the audio would not work using HDMI and it wouldn't even show up in settings.. i tried drivers bios and all but then through trial and error this was my solution: no there was no sound at all from HDMI.. on the GIGABYTE B550 AORUS Elite AX V3 Motherboard you need to use the provided audio 3.5mm "aux" ports and use an "aux" to red/white cord then go into settings on the selected TV/monitor go to audio settings and select the audio input being used