FEMEROL 250A MIG Welder,6 in 1 Gas MIG/Gasless Flux Core/Stick/Lift TIG/Spot Welding/Spool Gun Compatible Aluminum Welding Machine Large LED Display 110V/220V Multi Process Welder

The machine arrived on time, in perfect condition. The thing that struck me first off was the build quality, and the weight of the machine. Then just the ascetics of it, for a welding machine it is very easy on the eyes and looks like it is ready to get to work. It looks and feels like a quality machine. I have never been able to run a proper weld with flux core wire, but after setting up the Femerol Mig 250 Pro I was running some quality welds, minutes after un-boxing the unit. Which I am sure will only get better. The display and inputs take a lot of the guess work out of Flux Core Mig Welding. The Synergic Mig function seems to work as advertised. And the ability to fine tune amperage and wire feed rate only help to make quality welds. As a weekend welder, I don't believe you can get a better machine at this price. Update: My welds are getting better all of the time, I am building a cart for the unit to get some practice in. I have the issue of the display blinking after shutting down. I contacted customer support, Lily responded within an hour or so. It seems this phenomenon is normal due to capacitor discharge and such, I was assured it was normal and not an issue. Whew! Because I really like this machine, I believe I'm looking at years of trouble-free service ahead. I'll keep you posted.

Have used for flex welding and worked well. Tried spot welding and wasn't very good but it was my first time trying spot welding. I'll update the review once I use this product more.

So far love the machine. Do anyone know what foot.peddle is compatible with this welde r

My transformer type MIG welder was getting tired so I purchased this Inverter model. I was not sure where it was made but on the box it said Made in China. I came with all the accessories as described. I just had to change the power plug to a 16 Amp plug, load some wire, connect the CO2 cylinder and start to set it up. In around 10 mins I got it set to weld 1.5mm steel plate, weld is very consistent but I am sure I can adjust even better. What I noticed is that the ground cable and torch are very light so its aluminium, most probably I will hook up my old ones as these are copper and heavy duty. Other than that so far so good. All in all its alot of welding machine for the purchase price.

this is my 4th chinese multi function welder, and i have ran over 60 lbs of .035 wire with co2 gas in the first 3 welders used in repair of trash truck compactors, so i have a fair amount of experience with these units. this is my first femerol product (mig 250 max) and it arrived in good condition with an amazon delivery person. adequately packed, but maybe lacking sufficient packing should it have been delivered by fedex or ups where the shipping processes in my experience are much harder on things like electronics. so thumbs up for amazon delivery! unboxed and changed the drive roller over to the V roller for 0.9mm for the .035" wire i use, installed the torch head/lead which btw appears to be a bit heavier and better built than what is typical of these welders. installed the included 0.9 contact tip, and attached a co2 cylinder. ran a few beads on some scrap 3/16" plate, and also a T joint of the same scrap, the machine runs very nicely without issue and has several extra parameter settings generally not available on this class of welder. the overall build quality seems good, fit and finish quite good, and seems to have some heft and does not appear cheap or feel cheaply made. i have a large 44"x75" mild steel plate to weld into the back of a compactor, so there will be about 160" of weld, top and overhead to be done, with the plate beveled to allow for proper penetration. this will put this unit to a rather severe test of its capability. i will be watching for staying under the duty cycle for the operation, at my age i have a smaller duty cycle anyway, so i would expect the machine to have no problem over running me. so far i am impressed with this product, and will know after this project how good it really is. i do expect it will do just fine and will have my approval. in any case this is a really good unit at an equally good price point, well suited to home use, light industrial, and other uses where portability is paramount. update: after running nearly 11lbs of 035, i switched to .030 with the AI recommended settings for this machine to do a bunch of overhead welding. the problems i had were related to my advanced age not allowing my neck to bend back far enough, and not being able to get into the center vision of my tri focal glasses, so i passed the torch to the younger guy. he being someone that has several years of heavy welding, spray arc of thick section steel, so he at first was not impressed with such a tiny little toy (his words, not mine). by the time he was done welding, which was over an hour of continuous operation at an indicated 150-160amps he is now a convert! he absolutely loves this machine. that welder never complained a bit, the only upgrade i did was a 1/0 copper ground lead and a quality ground clamp the torch and its lead remained oem stock, and were quite warm when he stepped down but gave no problems if i had a small shop where we did piece work, small jobs at a bench, i would have 2 or more of these welders at each station, setup to run .023, .030, and .035 wires, each on a shelf above the bench making adjustments easy for even old guys like me. i really like this welder, and it has paid for itself running the first couple rolls of wire. for a homeowner, diy'er, small time operator, this mig welder is in my opinion really good.