Stacked Dual Vertical Monitor Arm with USB A/C for 17 to 49 Inch | Pro Gas Spring, Aluminum Material, Flexible Screen Layouts, for 75/100 Vesa Mount, Hold 44 Lbs Each Arm, for Samsung Monitor

I ordered a bunch of arms to set my Apple Displays up how I wanted them. I'm a graphics professional and these monitors are basically my main tools for work year in and year out, so I care a LOT how they are set up and where they are set up and ultimately what's holding them. I was tired of stands on my desk so I wanted to run some arms. I tried HumanScale, Ergotron, Knoll, etc - I set them all up and, for me, (quite surprisingly) these relatively cheap arms were the winners. I'm pretty snobish about my gear and I wish the more bougie brands were the winner, but I can't deny how grea these are. They were the most solid / no wobble vs the other options. They also look the best vs the others. No branding, subtle smiley face adjustment indicators, white VESA covers and a small but safe base. Ergotron had an ugly VESA plate and ugly clamp, HS arms were kind of bulky and too terminator-metallic (and sheesh the price). These are the cleanest looking, most solid arms out of the many that I tried. They do, in fact, tilt forward. You apply a light amount of pressure and then tighten them forward, works great. My top Studio Display is tilted forward. The cord management on these arms also SMOKED the $415 Ergotron options, way cleaner. My only semi-gripe (and someone else posted it about this arm) is that you *do* have to take the whole thing down to move it around on your desk. I see this as kind of a non-issue long term through because once my monitors are up its usually a LONG time before they need to be moved (rearranging my office or moving or something, I usually don't just move the arm around all the time. Also if you are doing it via grommet that's how it's going to work out anyway). It's a small pain in the beginning when you are setting up. Lastly, the set screws on the arms are chrome and if they were white, that'd be a nice touch to blend them into the arms better. Super small nit pick though. I'd buy these again any day.

Did my research and watched the Manufacturer's product videos along with some youtube video reviews and installation tips and tricks videos. My install involved two Samsung G9 oled monitors from Prime WITHOUT the television hub. These monitors are being used for stock trading and I am not a gamer. The assembly and quality of the aluminum shafts, parts, and spring arms was excellent. Take your time and watch some of the videos. Follow the directions and look for the mounting backplate arrows that show you were to point it towards the top of the monitor. Be careful screwing the VESA Samsung included adapters into the back of the monitor hole area. The small tool kit with necessary allen wrenches was helpful. My set up required the base clamped unit to be mounted about six inches to the right of the desk centerline so that when the arms are mounted and monitors attached they will center up property on the desk line due to swing arm offsets. Make sure you attach the monitor mounting plates with the arrow pointing to the top of the monitor. Latching onto the arms is simple but do them slowly and make sure you backout the tension allen wrench screws at least three turns counterclockwise so the arm will not drop when the 28 lbs. monitor is secured to the arm which lists a max weight per arm of 44 lbs. so these are way under the load limit. You'll love the results and when properly adjusted these oled G9 monitors are perfectly suited for this type of installation.

This is a very well-made monitor mount. The aluminum construction feels premium, the gas spring arms operate smoothly, and installation was straightforward. Everything about the mount feels sturdy and high quality. The only reason I'm giving it 4 stars instead of 5 is that it wasn't the right choice for my setup. I was trying to stack two 45-inch LG curved ultrawide monitors vertically, and the center pole didn't provide enough height to position the top monitor where I wanted it. The arms had no problem supporting the weight—it was simply a limitation of the available vertical adjustment. If you're using smaller monitors or mounting two displays side by side, I think this mount would work great. But if your goal is to stack two 45-inch ultrawides, I'd recommend looking for a mount with a taller center pole or greater vertical range. Overall, it's a quality product—I just hope this review helps others with a similar setup choose the right mount the first time.

This new dual monitor has been a awesome upgrade to my workspace. It's taken my two Lenovo 45" monitors and stacked them with unlimited adjustment options like tilt and extending forward. The build quality is very solid and sturdy, holding both monitors securely without any wobble, even when adjusting the height or angle. Installation was pretty easy to follow and took about 30 minutes to put together. The additions of the cable-management system and built-in USB extension in the base is a nice touch. Overall, it’s a well-designed, reliable stand that significantly improves comfort, productivity, and desk space. I would recommend this to others.

Great quality and stability! I have two monitors stacked and they are solid as a rock!

Dont waste your money on this garbage. Hooked up a Samsung Odyssey G91 and a smaller Acer 34" monitor to this contraption and a few things to note. 1. It will not loosen up to adjust for screen height. adjustment screws are completely frozen in the arm. 2. Once connected and COMPLETELY tightened down the tilt function for both monitors, will droop forward with the weight of either monitor. Even with those set screws COMPLETELY tight. 3. Extremely bulky and would not compress enought to put one monitor over the other without pushing the complete setup to the middle of the desk. If you have a Executive type desk this might work or even a reception style desk. If I had not fully commited to this installation, (with drilling a hole in my pristine desk) I would have returned this. This is totally just my opinion, but I would look for something different if you are in the market for a large format double screen mount and have a standard home width computer desk or gaming desk. Not a simple install. cable management takes me back to 1990. A total waste of money for me. Also, glad I saved the original stands for these monitors as this will be going into the garbage and I will be rearranging desk space to fit them side by side.

The arm itself is fantastic—solid build quality and the damping feels just right. It holds my dual-setup (ultrawide + vertical) without any wobble. It really freed up my desk for my new PC build. Two things to watch out for: 1 Cable length: The arm adds quite a bit of distance. My original power cables are too short now. If your PC is on the floor, you'll definitely need 10ft+ cables. 2 Compatibility: Make sure your monitor actually supports a mounting bracket! I learned this the hard way after picking up a secondary screen at Walmart, only to find out it didn't match the VESA mount at all. Other than my own cable and monitor blunders, the arm is a 10/10.

Works very well with my LG 32' monitors. Very easy to install and secured very well to my desk. Well worth the money.

I've been hunting for a good dual-arm monitor mount for a while, and after looking at a few different options on Amazon, I decided to go with this one. It's definitely a bit more expensive, but honestly, the quality makes it totally worth it. At first, I was a little worried the installation would be a hassle, but it turned out to be super easy. The instructions were clear, and there's even a QR code that links to an installation video, which made everything even smoother. The arms are solid and stable—no wobble at all. My monitors are nice and secure, and the setup has been perfect for my work. Plus, it's saved me a ton of desk space, which is a big win. All in all, I'm really happy with this purchase!

So far good

20 December 2025: I am writing this immediately after setting everything up, so there is a possibility that this review may change and I will indicate if I ever make an edit to this, but I am thrilled. First paragraph is the story, second is the performance comparison, the third is the TL;DR for anyone in a hurry I have set the "ARES WING Dual Monitor Arm for Ultrawide Heavy Duty..." on my Secretlab MAGNUS Pro XL desk. I initially purchased one of the Secretlab (SL) single monitor arms to test out the feeling between monitor stand vs arm; now, without talking trash, the SL arm failed miserably. To add insult to injury I had to spend more than half the cost of the price of the SL arm to return it to the company because they do not cover return shipping fees. On the SL arm, I was supposed to be able to trust it to hold my monitor (Optix MPG321QRF QD) as it only weighs 16lbs (15.43lbs exactly) and the max weight on the SL arm is stated as 17lbs. Forgive my lengthy comparison between my experiences with the arms. I'm an educator and a nerd, so this one is for the people with the same level of OCD and anxiety as myself. SL ARM - In terms of the translational motion (that's the x, y, and z): motion along x (left to right), y (up and down), and z (backward and forward) felt jerky while repositioning the monitor. ARES - feels nearly fluid and and easily controlled. That's strike one for SL and plus for ARES. SL ARM - In terms of pitch (tilting up or down about the x axis) and yaw (swiveling left or right about the y axis): these were, at best, adequate, but weak; it holds, yet feels under supported and prone to drift under load. There was considerable force needed to change the pitch regardless of adjustments made to the screws and for a monitor that has very little to grab onto, this is, yet another strike. ARES - Sturdy and controlled, plus for ARES. SL ARM - In terms of the roll (tilting the monitor about the z axis): the display rolls off to either side and does not stay squared. the SL could not reliably hold a level horizon. ARES - No difficulties. That's three strikes for SL and three pluses for ARES. TL;DR: Mounted this to my MAGNUS Pro XL, it's sturdy, motion of the arms is fluid and stable, holds my screens without issue.

Super simple to set up. Great product feels super sturdy. Definitely recommend!

I searched a lot and tried a lot, this works for my 2 heavy 50” screens , don’t roast me for my wire management , not there yet :) arms are of good quality !