SEALIGHT H11 LED Fog Light Bulbs Yellow, 12000LM H8 H16 H11 Yellow LED Fog Light Bulb 600% Brightness, 1:1 Size 100% Successful Installation for Trucks Cars, 3000K Amber Yellow, Pack of 2

Easy to install and much brighter than stock, but about 3 months after install the wire pulled out the back and they broke. I’ll be contacting the company and hopefully getting a warranty replacement. Update: I was able to get a replacement bulb from the company. 18 months after replacement the bulb is flickering. The life of these bulbs is pretty poor. 2 years in, both fog lights are completely burnt out. Have not been able to contact the company again. Definitely not long lasting life

I returned these lights, they performed poorly in my 1999 Expedition attempted use. 1997-2002 F-150 and Expedition with fog lights have the same assembly and setup, and these did not give good light on that assembly. Sadly, the LED light itself appeared to be bright and white, but the fog assembly reflector assembly performed exceedingly poorly with these lights because the proper vertical orientation of the LED board edges (LED's point left and right) could not be achieved in that assembly. This light does not have a "clocking" feature wherein the LED board in the "bulb" can be rotated so that you can get the proper orientation. (On most makes, this is lights point left and right, or occasionally, lights pointing up and down. On the F150 and Expedition, these pointed an awkward diagonal orientation that left huge dark spots because of misalignment of the light with the expectation of where the light should be for the reflector. I found an alternative, that was of the cylinder variety (6 rows of lights up down, two left right, and 3 front with lens) that worked much better in my model truck. These Sealight Laxmas LED lights are going back. They did fit in the assembly, where installed without issue, and did not appear to flicker. But the lights just produced bad light. Going with a different brand.

I installed these in my 2018 Mazda3 Touring, installed both the High and Low beam bulb. The install is pretty straight forward, remove the factory bulbs, install these. zip tie harness so it doesn't flop around. After getting that all done I reached in and turned the lights on. Viola!!! bright lights!! I cleaned up my flash light and trimmed the zipties, closed my hood and went to back my car out of the driveway, that's when the problems started. My Check engine light immediately came on, the service your car NOW lights flashing across the infotainment center. Charging system, traction control, collision warnings ETC. I didn't get the bottom 3 errors due to the fact I shut the car down. Popped open my hood, reinstalled the factory light bulbs, restarted my car and everything went back to normal. I attempted to contact the sellers customer service page and the msg I received: Coming soon... Coming soon... I would avoid for a 2018 Mazda3. and if you do buy, make sure you can install withing your return window, so you don't get stuck with $80 worth of useless light bulbs.

One of the two bulbs arrived with the set screw missing or damaged so it could not be installed, as shown in pictures. The other bulb had great brightness when I tested it, so they seem to work well, but I could not install the set in vehicle because of manufacture defect.

Don’t install in housings made for halogen bulbs. These have a lot of light spillage. Bright, though.

These bulbs are very dim. They are no way near 12,000 lumens. The standard NonLED bulbs are brighter than these are. They are very hard to install. It is not a perfect fit. They are this cheap because they CHEAP!

I had high hopes for this LED bulb to replace one of the burnt out fog light bulb in my car. I had only one burnt bulb, the other is working. I plan to replace both the original halogen bulbs. Neither of the new ones worked. This is proven by replacing the working bulb with a new one and it didn't work. Obviously it also didn't work in the burnt bulb location. The package appears to have been opened, or in other words, this may be a returned product. So I don't know whether these are defective bulbs or incompatible with my car. The good thing is I was able to try it within the 30 days and return.

These did not work. I verified with other bulbs from the store that all my wiring is correct so it has to be the bulb. They never powered on at all. Fit and installation were both easy, but they did not work. If 0 stars were an option, that’s what I would give it. Planning to return since I have sourced some other lights from a parts store. You get what you pay for!

The SEALIGHT 9005 LED headlight bulbs were extremely easy to replace and fit perfectly without any unnecessary hassle. I especially appreciated the included white gloves, which made it easy to handle the bulbs and complete a clean installation without leaving fingerprints or oils on them. Once installed, the difference was immediately noticeable—they are definitely bright and provide a crisp, clean white light that greatly improves nighttime visibility. The bulbs feel well-made and durable, and the overall package was thoughtfully put together. An excellent upgrade for anyone looking to improve their high beams. Highly recommended! These were installed successfully installed and used on a 2012 Honda Civic, 4-door, 1.8L.

Good product

Poor quality - the brightness intensity is worse than the original halogen lamp - and certainly NOT 600% upgrade as suggested. Wasted my money on these poor quality lights.

El paquete llegó a tiempo, sin daños y muy bien empacado, pero el producto es excelente buenos terminados y excelentes materiales

Son de buena calidad, alusan bien y de fácil instalación y el precio es bajo para la calidad del producto