NUMAKERS PLA+ 3D Printer Filament, 1.75mm, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool (2.2 lbs), Compatible with Most FDM Printers (Fluorescent Yellow)

Works great with my Bambu A1. I've used the printing profile provided on Numakers Website and no print fails. Highly recommended.

.. numakers is one of the best filaments i have used.. i am a hobbyist and have been printing for a couple of years now.. i initially ordered six spools of different colours when i got the printer and loved them all.. have refilled a couple of times now and love it.. i tried using other costlier filaments a couple of times, but they didn't even come close to numakers.. staying with numakers.. :)

edit as of 2025 - review mostly stands however this is for the original Numakers PLA, not the new PLA+. The original PLA was terrible after a month as it absorbed enough water to crack and never ever dried out. The new PLA+ is however excellent and has none of the issues. old review continue Absolutely undoubtedly the best PLA you can find in Indian market now. For under a 1K it matches quality of much more expensive filament online. This is definitely something you should get eyes closed. The filament has pretty good bed adhesion, the winding is nice and clean and has a clean slight glossy texture. At less than 1Rs/g it's the only PLA filament I'll ever use besides eSun PLA+ The best part here is the company, Numakers actually cares. They use fully biodegradable cardboard for packaging which is great. The PLA comes in a Vaccum sealed Resealable bag with some dessicant which is extremely neat and no other seller actually does this. The vaccum sealing is also great as it's clearly well done in comparison to certain other sellers online. Not to mention their manufacturing process seems pretty great. Now to address the issues that some have complained about stringing, this PLA feels a bit hygroscopic so if you live in a hot and humid area the moisture absorption can cause a bit of stringing. I store it in the bag it came with, with the silica packet and it works fine for me now. Using combing in Cura and fixing retraction also kind of helps with it. I use it at 200-190C with a 50C bed for first layer and never had any issues with peeling on the stock ender bed or glass or PEI beds. Edit - This PLA is definitely pretty hygroscopic so if you leave it outside it'll become brittle so keep it sealed or within a silica gel dry box for best performance.

Good filiment

Really great product with good quality print. I have used this for printing some minor projects and toys for kids and I got awesome quality prints without any issues. The build plate adhesions is really good and I have printed using temperature 210c and plate temperature as 65. Please note that the yellow color spool what I order is having quality issue since it is getting stuck in the extruder but I was able to return it without issues. Thanks NUMAKERS for creating such great quality reels your product is much better than the other manufactures and affordable.

Have been a happy customer...am a beginner...so printing basic parts, it works great. Have a used printer...so cannot complain much.

There is little to no stringing and the winding was not perfect as there was a winding issue in middle of a print. The material was a little fragile as it broke apart a few times. It also clogged a few times. Material is on the soft side compared to other PLA+ from other manufacturers. Maybe the problem was only with the spool I used. Would like to try their other filament just to know their overall performance. Edit: it's actually very good for the price, very high quality material and still the prints do not have any problem. Clogging is mostly the printer fault or my fault. Material is fragile due to room moisture and not the filaments fault, even when it had moisture the prints came out fine.

I just had a terrible issue with prints not sticking even though the skirt would stick fine. I tripled checked the z offset, adjusted print bed temps and a couple other things but it didn't work... later I tried a different brand filament and it worked very smoothly. I'll never order from Numakers again!

Recently purchased a printer. A generic white PLA came with it and naturally, I began by printing a small trinket. The geometries were too small for the PLA and the print quality was unusable. The part included a .5in unsupported overhang at a very shallow angle which more or less collapsed with the normal PLA. After buying this roll, I attempted the print again with entirely different results. Printing at a standard 200C and max quality of .12mm the part came out perfectly with almost no discernable collapse in the overhang and sharp edges to every surface. The filament makes all the difference and for the price, you cannot go wrong with this. I haven't compared it with others at this price point yet, but the quality is consistent enough, such that no print has failed, that I'd order it again.

I bought this reel for a specific project for a friend. This was the only one I could find that was reasonably priced in a good approximation of subtle pink I was looking for. In print, thought the color was okay, but mind you it is a little bit subdued for pink and has a slightly brown tint to it. When the reel arrived everything looked good, was packaged well, and was wound neatly. It did come out of the bag slightly brittle. So I loaded the reel and proceeded to print with my usual PLA settings. The first layer just wouldn't stick. For longer prints the corners or ends peel up and off and cause the whole print to warp or detach. It won't hold a raft or brim either. Then when unloading the reel, the filament broke from inside the tube. I ran the reel through my Sunlu Dryer Box for a regular cycle... still brittle. I ran it for two more 6 hour cycles and the brittleness seemed to have gone away. After that I ran another project through, I finally got a large bed print to stick even though the corner warped and lifted oh so slightly it looked okay. A few months later I reloaded with this reel again and sure enough, it warped, this time severely. I've got about 85% of this reel left and don't know what I'm going to do with it. I immediately reloaded with a different brand/color and printed the same project and had zero issues. Won't likely be buying from Numakers again... its too bad, it may have only been this color that is troublesome.

This filament sucks it clogging nozzle its the worst filament I ever used, not a single secsesful print it keeps clogging the nozzle in the first 2 minutes, also the box smells so bad and it's shrinked wrapped that means it got wet in the factory or packaging and then shrinked wrapped. I don't recommend it at all

Best product ever It’s really long so you don’t have to buy as much it’s super great it works with 3-D pens and 3-D print it comes in this Holden container really useful it doesn’t smell funny when the nozzle is pushing out the film it anyway highly recommend this

This prints very nice, I won't lie, however this is the first filament to ever get jammed inside my nozzle and absolutely refuse to come back out. Not once, but twice. The only fix was to snap it off at the bowden tube and shove new filament in and push the rest of this stuff out. Color is not teal more like mint green.