Spraytech iSpray Nozzle for HVLP Paint & Stain Sprayers | iSpray Nozzle fits Lock-N-Go Wagner HVLP Sprayers and sprays unthinned coatings across broad interior and exterior surfaces.

It's really nice to have a spare. I disrespected mine by not maintaining it right and was left with the detail container. Direct fit and function. I'm back painting projects.

Hello! I own the Wagner Flexio 2000 which is a budget / entry level sprayer. I own and have used the iSpray and the Detail finish nozzle on multiple projects. The best piece of advice I could give for either nozzle is to read the owners manual! Wagner does a decent job getting users in the ballpark of which nozzle can spray which type of paint (latex, alkyd, primer etc) and how to dial in the sprayer. Lots of people end up saying "this sprayer is worthless" but I wonder how many have double checked their initial settings. For example, with the detail nozzle it recommends a Heavy Flow for oil enamels. While I was originally tentative to turn the sprayer to HI while spraying in really tight areas for fear of overspray, it turns out the sprayer functioned optimally on this setting. I would say only AFTER you've dialed in the settings and sprayed on a test piece should you begin thinning paint to your desired coverage.With that as a disclaimer, I have thoroughly enjoyed the detail nozzle and will even say it's a significantly more reliable nozzle than the iSpray. I redid quite a few pieces of our master bath, starting with spraying cabinets, then adding shiplap and finally cutting a custom mirror & frame. The detail nozzle carried me through hours of painting (probably 10 coats collectively) without fail and the entire project turned out extremely well. I posted some closeups of the mirror frame and then one of the cabinets with 1 door primed and the other yet to be primed side by side. The detail nozzle was plenty "broad" to have coverage on 6 inch shiplap planks on a single wall. I suspect if you had a really large room it may take awhile, we only had 100sq ft of coverage. But with such a high visibility project I'd say take your time regardless! In that vein, I didn't mind having a tight spray pattern and making sure I doubled back over each pass slightly so there weren't any gaps.Cleanup is easy peazy with a latex paint, but w alkyd or other oils you just gotta be patient. The person who will find most success with this nozzle is the one who spends time reading the manual multiple times and is willing to take the sprayer apart and learn how all the pieces function together... At least that's how I understood how to alter something when it didn't work optimally. Clean thoroughly with a toothpick and let the pieces all sit out and DRY independent of each other after each use. In my opinion that extra effort saves headaches when youre in the middle of painting and just want to... Paint! Lack of cleaning and drying will cause headaches later.Really thrilled w how the project turned out. I'm certain there are products that outperform but cost 3-4x as much. For me as an entry level painter I feel confident that the cabinets I just sprayed in the bath look almost as spectacular as the ones we had professionally done in the kitchen.Very pleased customer and would consider Wagners products in the future

Great product and easy to use. Good value for cost and made project very easy to do!

Sprayer worked great, fine mist. Only issue I did have was the part that you hold down to spray would come off the little screws that are holding it in place. So that was frustrating when using. I had to keep stopping and putting back on. I have one that came with the machine and it doesn't do that.

Now this deal is a steal, not sure if you are familiar with Wagner painting product, but they are top tier in the painting world. the downside is they don't sell replacement parts. So, thank God for Amazon!!Wagner Spraytech 0520006 iSpray Front End Nozzle is exactly what i needed to get my machine back up and going, the storage tote is a high-quality hardened abs plastic, so it ensures that (they built it for the long hall). Dual spraying angle allows for maximum coverage in hard areas with tip flow control, so it doesn't allow buildup on the end, and the spray flow control dial makes it optical for painting big areas with little paint, o and you can use for multi materials, such as wood stains, paint strippers, varnish removers, even thick rubber coating sealants for roof or foundations, overall as a independent starting out its the best bang for your buck hands down.1000% recommend!!!

I use my Wagner detail sprayer to paint cars, which is way outside its comfort zone. You have to thin the material more than is recommended, and the cup runs out quickly. But sometimes you gotta use what you have. My biggest issue probably doesn't apply to most users: there are two rubber/silicone parts inside the nozzle assembly, and after several uses these harden and start leaking. I suspect it's because I use lacquer thinner for cleaning, which is a necessity with urethane auto paint. Wagner doesn't specifically say this is a no-no, but I can't find any other reason why these parts fail. There may be replacements for one part, the nozzle seal near the front of the gun. But the other is part of the needle assembly inside the gun, and I've found no replacements for this. My new experimental cleaning procedure will be to completely disassemble the gun after each use and using lithium grease on those two flexible parts. Will this extend their life? Hope so 'cause this is my fifth gun, and while they're inexpensive, I'd rather not have to keep buying new ones.

Works wonderfully.My original kind of died (too much varnish)This is a good replacement, but some of the parts are slightly different.Probably a newer design.

I like the ease of putting it together and ease of clean up but I am not happy with how my painting turned out. It was difficult to have good consistent coverage, and I found it hard to keep the trigger pushed down for long, so it was awkward to use for me.