2PCS Motorcycle Turn Signal Light, 12 LEDs Turn Signal Indicator Lamp, Amber White Front Handlebar End Light for 12V Scooter Sportster Cruiser Motorbike

I love these! They improve your visibility at a 360, are bright and functional which looks cool plus gives you more safety while riding at night, it’s a great product. Requires some elbow grease but when you’re done installing, it’ll be worth every penny and effort. Now, to install: You’ll need to connect black wire to turn signal ground, red wire to hot (blinker) corresponding signal side and white wire to key switch power (tap the white wire into any running light wire that turns on when you switch on the ignition) you’ll also need either an led relay flasher or a pair of resistors for this setup to properly function. Though, careful with the resistors, functional but get quite warm. Place them far from other wires or plastics, if possible mount them on metal. I’m currently using these on a Honda Ruckus / Metruck.

Second time installing these, for the price you can not beat it. Wires are thin but still works great. Rubber mounts were too large to fit in the handlebar but a quick swap with traditional expanding metal sleeves resolved that issue.

Easy to install, bright in daylight BUT the plastic black end caps just fall off.

The lights came in they are in great condition they feel sturdy it took me about two hours to install this on my moped cuz I had to do some drilling on my handlebars the lights work great I had to put a resistor in the line the running lights work great for a while but one of the white lights quit working and then the other one quit working so I have an uninstalled the running light portion but the turn signal works fine

Those are the best cheap option for this model of turn lights. I had some cheap one made of plastic (ebay) and it was a shame, the bold itself was made of plastic and it broke while adjusting it. BUT THOSE! All metal! and the light is bright and clear! As written by other reviewer, the white light is brighter then yellow but hey...it works! I use them near the headlight, I'm too scared to put them on the handlebar: that's the first thing that hit the ground in case of accident. PROS: - METAL! not plastic. - Cables are long - Bright white light CONS - The cables are really weaks, you can barely sold them without metling - I wish the yellow was as bright as the white

Product is garbage now Iv used them many times before and they worked great. Bright white light bright orange turn ligh. Last two sets I ordered where junk one set wouldn’t work. White light bright orange fine but wouldn’t blink. If you disconnected white light orange would blink. They sent new ones I haven’t return the junk that cost me as much in gas to go to post office as they cost. The second both worked proper but one of them the turn singly light wasn’t bright. After testing them twice one stopped working on the turn signal like the first batch ordered and the second one the turn signal light looked like only 1/5 of the leds are working. What use to be a good product is now junk.

Used them to replace my rear blinkers and already bought another pair to replace the fronts. Very bright and seems well constructed, bought a pair from Cycle Gear for $35 that were plastic and not nearly as bright. I've only had them on my bike for a week so we'll see. So far so good! Put a dab of epoxy so hopefully the lens won't rattle off like some of the reviews had mentioned.

I loved these when I first got them, the packaging is great, the build quality seems solid, they are very bright, however, the white light definitely overrides the yellow of the turn signal in the daytime. and my yellow turn signals failed after three weeks. the white running light part of the assembly works great. would be a five star product if it held up over time.

Replaced old broken ones on my scooter and these work better than stock I figure even if your just adding to your ride their perfect addition for safety

wont fit my bike

I've had these before and the last pair died after a year. This last iteration has the LED plate contacting the body over the entire surface so it should dissipate the heat better and hopefully last indefinitely (I will still add some thermal paste). Pros: - Bright in both white and amber mode. - Visible from both front and back, but also from the sides as well. - When the turn signal is applied it switches between white and amber instead of just adding amber to white. This makes the turn signal sharper and more visible. - Solid metal housing. - Housing mounts firmly into the handgrip just by screwing in. No tools necessary. - Low profile. Doesn't widen the handgrips any more than necessary. Cons: - Not protected from inverse polarity. They will burn if you connect them wrong. - Most handlebars need to be drilled to pull the wires through. Not the fault of this device - just the way it has to be installed. - Wires could be longer, although they will easily reach the middle of most handlebars. - The translucent cap can unscrew itself due to vibration. - It's not waterproof, but can be made so with some silicone or glue. All in all an extra visibility and safety device that is well made and affordable. It makes my motorcycle and signals stand out at night and visible from all sides. I would not use these as the sole front turn signals though, even if it was street legal.

They are not the same as last year. The thread is much smaller and is not compatible with motorcycle mount. Disappointed 😕

Have put many on my triumph bobber. They look and work well, while they are in operation. You need an led flasher and an led bulb in the idiot light. Mine is a 76' so its in the headlight bucket. Problem is, they last maybe a couple of months, stop working, and you have to toss them. Motogadget makes about the same style but $80 or so each.