ZITAY CFexpress Type B Card to NVME M.2 2230 SSD Adapter Compatible with Nikon Z6 Z7 Z8 Z9 Canon R3 R5 R5C Panasonic GH6 S1H FujIfilm X-H2【SSD is not Included】

Excellent,works perfectly in the enclosure I also bought along with the cooling paste

very poor product when adding a 7000mbs write speed card this adaptor can only push out 450mbs so can not be used on anything higher then a 4k raw. I tried to shoot 8k raw 60fps it lasted 1 second before It failed. it also doesn't come with any past like it shows.

Lumix GH7、GH6にて使用。中には2TBのM.2SSDを入れて使用しています。 速度は中に入れたSSDの速度で作動します。 ケースの加工精度は高いので、カメラ内に綺麗に収まり、抜けにくいということもありません。 ただし、アルミのケースで熱伝導を良くしているメリットを生かすにはカメラ内部と密着している方が好ましため、cfxpress-type-bに関しては少しキツく感じるくらいの方が放熱性は上がると思います。私は内部に熱伝導シートを貼り付けて使用しております。 M.2SSD2230自体がサーマルスロットリングが起こりやすく、熱による転送速度低下により録画が途中で止まる事は十分あります。 2TBのM.2SSD2230をケースに入れ、GH7で最大容量の4.3GB/s(ProresRawHQ5.7k)で録画すると約21分録画可能ですが、19分あたりで転送速度低下により録画停止しました。 普段こんな大容量のコーデックで撮影することはないのでmov422-10bit4kやProres422-4kで録画するぶんには止まらずに撮影出来ています。 ケースには付属でドライバーと、ネジ(予備4本含む)、容量のステッカー(1tbとか2tbとか)が同梱されています。 熱伝導も考えステッカーは貼らずに使用しています。

Provenivo da un vecchio adattatore preso su quel sito cinese famoso. Un autentico accrocchio che una volta inserito a fatica sia nel lettore memory che nella z9, per via dello spessore leggermente superiore, faceva fatica ad entrare ed uscire e non faceva scattare il sistema di ritenuta della memory, facendo si che mentre scattassi o peggio, filmassi,la memory non veniva riconosciuta. Chiaramente con tutti i disagi del caso. Questa soluzione non l'ho provata a fondo ma già la compatibilità meccanica mi fa ben sperare. Recensione che in caso di problemi aggiornerò altrimenti lascerò così.

Funktioniert einwandfrei in meiner NIKON Z8 mit einer SABRENT 2230 M.2 NVMe Gen4 1TB SSD. Ist absolut schnell und und von der Preis/Leistung meines Erachtens unschlagbar. Mit dem Transcend RDE2 Card Reader eine tolle Kombination. Die Langzeit Zuverlässigkeit bleibt natürlich abzuwarten. Einbau einer SSD ist problemlos. Bitte an Wärmeleitpaste denken die nicht im Lieferumfang dabei ist ! Bis dato eine eine Kaufempfehlung

Excelente opción a las tarjetas CFexpress tipo B, con un SSD de 2TB te ahorras como el 80% del costo de una tarjeta original

I decided to experiment a little with doing a DIY CFExpress card. The Zitay enclosure is a step above any of the other ones I've tried - from early MakerFab enclosures to Sintech enclosures; the first one looks like a science experiment, while the 2nd one was a little snug in my Z9. The Zitay, on the other hand, comes with pre-printed labels (only up to 1TB - c'mon Zitay, make 2TB labels too, please :) ), is precisely machined, has an indentation for the pre-printed labels so the card does not become too thick with the label on it, and teeny tiny little screws that fit perfectly. The kit comes with a screwdriver, thermal paste, and thermal pads. Together with an M.2 2230 NVMe, it's all of 5 minutes to assemble this, put it in your camera, and format it. Once done, it works perfectly. Your performance will vary depending on the SSD used. I have a Nikon Z9, Z8 and Z7. Slower PCIe 3.0 SSDs work beautifully in the Z7, but are unable to cope with the highest demands of the Z8 and Z9 (i.e., 4Kp60 N-RAW N-Log HIGH quality video) due to their too slow write speed. However, a PCIe 4.0 SSD such as the SABRENT Rocket NVMe series - available in sizes ranging from 128Gb to 2TB - works perfectly in all cameras, and allows you to record 4Kp60 N-RAW N-Log HIGH quality video. This, IMO, is a winning combination. Subsequent to my first purchase, I have bought 3 more enclosures, and have 2 x 512Gb cards, 1 x 1TB card and 1 x 2TB card, the latter 2 of which are the SABRENT. If you're a DIYer and understand that the bus architecture of CFExpress is essentially the same as that of an NVMe SSD, you'll know that the circuitry is simply a form factor adapter, and therefore highly reliable. This earns a very highly recommended rating from me.