ANYCUBIC PLA Plus (PLA+) RFID 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Reusable Spool, Silver

This order came quickly. I use it on my Bambu Lab A1. I did have to print a spool adapter for it to fit on my AMS lite, but that was easy to get from the Bambu Studio link to Maker World. There are files for the various brand spools and the Anycubic was there. It worked great on this conquistador helmet segment. I am printing the other segments for it, but I am so excited by how well it's working that I felt I had to post it here right away. I'll update with more pics when I get the rest printed and the whole piece assembled. This model is the dauntless helmet from Lootstudios.com. I can't beat the price of this spool and the quality is excellent for my needs here. It was on sale, but even the non sale spools are a decent price.

I've used a few different kinds of PLA+ in my time, eSun and so forth, and although I suppose there may technically be filaments out there that are minimally better than this, it won't be by much. The winding is excellent, the diameter is uniform, and it prints beautifully on my Anycubic Vyper. I don't see how Anycubic can possibly offer filament of this quality at this price. For the first time, I am going to stock up a bit while it is on sale for less than $14.

I used this to print a truck bed for my RC crawler. It printed great and the part seems solid. I will buy this filament again.

I make VR Gunstocks with PLA+. My favorite brand is Sunlu and this Anycubic stuff is extremely similar but not quite as strong as Sunlu. I've had a few more broken parts by customers since trying this out. It prints with a lot more gloss than Sunlu (on my Bambu P1S printers) and will crack much easier it seems on thinner parts. The layer adhesion seems to be just as strong as Sunlu, amazingly I'm not getting breaks along the layer lines but instead I'm getting stress cracks vertically across the layer lines.All that being said, this stuff is about 85% as good as Sunlu Black and is often several dollars less expensive. For other products and prints I'll certainly utilize this as it prints beautifully.

Prints with no issues and color is White. Not an off shade of white.Plastic spool is a plus.

Tl;DR - Constant adhesion and stinging issues no matter what I tried. Ending print is *extremely* brittle. Returning and will not purchase AnyCubic filament again.Printer used: Monoprice MP VoxelWith most adhesion issues I've ever encountered previously I was able to solve by either adjusting the bed temp a bit or using some stick glue. Not with this (AnyCubic, white) filament. NOTHING I tried resulted in adhesion through the full print. In two attempts (including the one pictured), the piece came loose after 90% completion.*EVERY* attempted print with this filament had stringing issues (as you can see in the first picture.) The filament arrived in a vacuum-sealed bag with a desiccant. However, the *very first* print attempt exhibited stringing. I've never had to deal with stringing before, so I don't have a dryer. Even filament that is 3 years old and has never been stored properly prints without stringing.I thought maybe something was wrong with the printer or calibration, so I threw in some old monoprice filament that had not been taken care of and it printed just fine (minus a minor adhesion issue that was corrected with some stick glue). See the second pic (red print). No stringing, and was able to complete the print.But most importantly, the old filament print is solid. The AnyCubic printed piece is exceptionally light and brittel, despite having a higher infill (25% vs 15% with monoprice filament). It snapped when I was inspecting it.

Prints well on my "Longer" good Halloween color.

The filliment works rlly well not stringy after prints and very durable for prints I’m running a Anycubic Kobra 2 Neo.

シルバーと書かれてますが、光沢は無くグレーです。ただ積層痕は目立たずきれいにプリントできます

Anycubicのハイクオリティなフィラメント（PLA+）です。テストプリントとしてお馴染みの船をプリントしました。船首の角度の急な部分にガタつきが全くなく、船室の入り口の一番上の部分（ほぼ宙に浮く部分）も、片側は少し乱れたものの、もう片側は全く乱れが無く非常に綺麗にプリント出来ました。今まで使ってきたフィラメントの中で一番綺麗な出来と言ってもいいかもしれません。積層痕はピシッとしていて美しいです。新しいレイヤーのプリントし始めの部分に少し乱れが見られる所があるのですが、どのフィラメントにおいても同様に見られるので、これはフィラメントの問題というよりはプリンターの性能に起因する問題のように思いました。色は写真とほぼ同じ色味ですが、写真よりもほんの少し明るいオレンジという感じです。綺麗な色味です。これまで7種類ほどのメーカーの色々なフィラメントを使用してきましたが、こちらはその中でも1番目か2番目くらい綺麗にプリント出来ました。次回は3Dスキャンした自前の造形物をプリントしたいと思っています。3Dプリンター： Creality Ender3 S1プリント物：　　3D Benchyノズル温度：　　210℃ベッド温度：　　55℃その他の設定：　デフォルトのまま室温：　　　　　20℃