Fluid Cooler and Fan, 15-3/4 x 11-1/2 x 5 in, Tube Type, 6 AN Male Inlet/Outlet, Fittings, Aluminum/Copper, Black Powder Coat, Universal, Each

Real great product and awesome for using to relocate automatic transmission cooler on a performance vehicle. Mounted underneath the back seat of vehicle, wired up and mounted with hardware and rubber cushion, it works fantastic.. Highly recommend👍🏼

I use a Bully Dog to monitor my transmission fluid temperature. My 2017 Tundra (5.7 L engine) has the transmission cooling system integrated into the coolant radiator system. At an outside temperature of 100 degrees, the transmission fluid temperature reached 225 degrees. After installing the Derale cooler, the transmission fluid temperature didn't exceed 210 degrees.

Excellent product

This thing is ridiculous! I have it mounted in front of my radiator for my power steering cooler and it is so effective that my radiator fans don't engage near as often and the LS under hood is almost 700 horsepower. I can't believe the difference this has made on my power steering fluid and also on my coolant. The install was very easy, I made a simple bracket to fit my application and installed two -6 AN lines. Wiring was a breeze with a relay and a hookup to ignition power. Very nice quality especially for the price.

Used this to replace my smaller cooler on my Trans am. My 600hp TA with a built 4l60e was asking too much of the smaller trans cooler I have, replaced it with this and I can push it in 100 plus temps and the trans stays nice and cool

It's a good high quality piece. ,they have higher standards.

I bought this to make a crazy home brew air compressor after cooler. It was a little more than I wanted to spend but the documentation on it had a working/burst pressure that I could trust. Also the fan was reversible to go from pusher to puller. The instruction could be a bit better as it was a little confusing on the push/pull setup. The 6AN fittings made the change to compression fittings kind of fussy but everything you need is here especially if you dont have a speed shop that carries AN fittings/adapters. You will need an external 12vdc power supply if you are using this outside of an automotive application and it supposedly pulls 5.3 amps. I fused it for 8 and have a small 100w/12A power supply is more than sufficient. Heat exchange? The air temperature coming in is over 200F and the output about 90 so yeah IT WORKS.

Stopped my overheating problem cold! Mounted under the radiator in back of front bumper!