HUANUO Dual Monitor Stand - Full Adjustable Monitor Desk Mount Swivel Vesa Bracket with C Clamp, Grommet Mounting Base for 13 to 32 Inch Computer Screens - Each Arm Holds 4.4 to 19.8lbs - White

This dual monitor mount works as advertised and when it says two 34 inch monitors it means 16:9 sized. I knew that when I bought it and even still it holds both my 21:9 ratio monitors great. One is a 34 inch Sceptre C34 and the other is a 27 inch discontinued LGb ultrawide. I have to rotate the LG into portrait orientation for them both to fit and I'll admit things are a little tight but I am still able to move the monitors for better viewing somewhat. These monitor mount arms are solid and of high quality materials. I recommend following the instructions and not making adjustments until the monitors are installed as they can whip upwards under the tension they have if you don't have the counterweight of the monitor. The adjustments that can be made to how hard or easy it is to move each part of the arm are a great feature. Except where the arms attach at the base where I haven't found any adjustment screw to be tightened. These arms don't move for me unless I move them but I wouldn't use them for mounting in a trailer or other mobile scenario as the resistance isn't very great. Edit: I was able to find the Alan type bolts for tightening down the swivel mounts. I still stand by not using this in a mobile to setting but I wanted to update this review to advise that they're kind of small and inset into the arm at the base and at the elbow. The whole thing did take me about 45 minutes to put together. This is mostly because I had to pull the monitors off the desk, remove the base stands and then wanted to run the cables through the cable guides on the arms. The guide on the upper arm uses only one screw and clips in on one side. It honestly feels a little flimsy but ultimately holds both the thick three prong PC power cable and the DisplayPort cable without bulging or warping. All in all this is a great option if you're looking to free up some desk space from the monitor stands or you need/want to be able to adjust your monitor orientation.

Not only was this easy to assemble & install, taking just a few minutes, but I can barely even think of anyway it could be improved. The components are primarily cast metal, so for the price the quality seems great. I appreciate that it uses two clamps and a nice big base for connecting to the desk surface - this seems very sturdy and is holding the weight of two monitors just fine. I have a 23" and a 27" mounted. It was lucky that both of my screens had VESA screws from the factory so I didn't need to use the ones included in the kit, but the kit includes everything needed. I also like that there are set screws for every joint, allowing you to tighten down the positioning if you want to. The cable management clips built into the arms are super handy to minimize cord clutter (yes I know there is still a lot of cords in my photo). Here is one thing I will say - the cable management is clearly designed for just 2 cords per screen - 1 power and 1 display. If you wanted to run a power cord and two display cables to a monitor I think it will be quite tight. You might just barely get away with it. For me I ran power, display, and a thin audio cable through and even that was a little bit of a challenge. Still, I'm glad they are there as it does help to hide some of the under-screen cable clutter. Overall this was a slam dunk and I no longer need to use a stack of books to get my 2nd monitor up to the proper height. I should have got one sooner!

The build is sturdy. I’ve mounted a 24-inch and a 32-inch monitor in an asymmetrical configuration, and there’s no wobbling whatsoever; it’s securely fastened to the desk and offers excellent stability. Since I installed relatively large monitors, setting them up took a bit of effort, but there were absolutely no difficult parts during assembly or mounting to the desk. The range of motion is exactly as described, allowing me to use a much larger portion of my desk, and I’m satisfied because it’s more convenient—for example, I can move the monitors closer as needed. It doesn’t look particularly high-end, but it doesn’t look cheap either. The appearance is about what you’d expect for the price. Overall, I feel it was worth more than the price.

I'm pretty impressed with this dual monitor arm, and see why it's (currently) amazons "recommended". Installation is straightforward and when doing the C-clamp style mounting, the instructions are completely unnecessary. The arms are very sturdy, and can be locked into position once the desired location is set. It holds my Acer 32" monitor without breaking a sweat (though it's a very light screen, to be fair. Lighter than alot of 27" ones i've owned) though it struggles a bit with my featherlight 15" second screen. This isn't a downside to the stand, as it explicitly gives a weight rating it needs to work with, and the small screen i use is FAR below the minimum weight. Becuase of this, with the arm tension loosened all the way, I'm just BARELY able to mount that screen as low as possible. If i give it any upwards force, or try to raise it even a centimeter, the springs will launch the arm (and monitor) all the way up, which jars the entire desk. So, just something to be aware of. Again, this is MY problem, not the fault of the stand, as i'm not using it in it's intended fashion. I only really have 2 complaints, and theyre things ive noticed on the 3 seperate sets of these i've bought over the last 6 months....the tension bolts are INCREDIBLY tight and can be very difficult to adjust for someone who might not have the most wrist/grip strength. And finally, they include 2 sizes of screws. The longer ones are M4x30 screws, to be used in conjunction with some rubber/plastic spacers for curved monitors. So far, on every monitor I have paired with these (with the exception of one Dell 27" with a dummy thicc plastic back shroud) the M4x30 screws have bottomed out on EVERY other monitor, far before they were actually tight, resulting in a loose, wobbly screen. So, maybe plan on making a potential run to the hardware store for some M4x25's to use instead. Those two reasons are why I deducted a star. Aside from that, these are exactly what I needed and I have zero additional complaints. I would highly recommend, and, as I've already bought multiple of these, I think thats a testimony in itself.

These independent dual mount arms have been a great change from my old setup. The installation process is pretty self explanatory and not difficult to put together. The arms come in a couple of pieces but instructions were clear. They articulate super well and I even installed one monitor vertically. Both are very large 28” monitors but this product has no problems keeping them in position. The base plate and clamps situation is pretty easy to use and I used an additional metal plate cover to protect the desk just in case. [I recommend especially for desks like mine] I really like the flexibility this mount provides me to adjust the monitors. This is one of those scenarios where once you try this you can’t go back. Very sleek and out of the way.

Why have I slept on a monitor arm, this is the best product I have purchased for my gaming desk set up. So easy to install and I have it on an ikea table with 4 legs. It’s holding a 27in and a 36in monitor both and so stable. I was scared it would not hold up on the desk but I can move it around so easily and nothing happens. Please buy this if you want good cable management and monitor stands out of the way. I can bring it low, high, and rotate it to any angle even with the big monitor next to the main 27in. I love this so much, it’s very sturdy and made really well. 5 stars to a company that ensures you get a great product. Don’t ever sleep on these arms if you want to save space and game with any angle that’s fit for the game. Super easy to assemble and install. And fits on any desk with the different mechanisms it comes with. I choose the one that clips right in place and tightens. So I don’t have to drill anything through the desk.

★★★★★ **Cleaned Up My Desk and Works Great** This dual monitor stand made a huge difference in my desk setup. It freed up a lot of space compared to using the original monitor bases and made it much easier to position both screens exactly where I wanted them. The arms feel sturdy, and the adjustments are smooth once everything is set up correctly. I can easily change the height, angle, and position of each monitor, which is especially useful for gaming and working at the same desk. Installation was pretty straightforward, and the finished setup looks much cleaner and more organized. If you're running two monitors and want more flexibility and desk space, this is definitely worth it. Five stars!

Worth it! I purchased two sets of these both for me and my wife and it’s holding up my two 32 inch monitors with no issue. Instillation took me no more than 10-15 minutes and it comes with the required tools and even has hardware for all monitor applications so it’s very universal. It’s also very easy to maneuver and has set screws so if your monitor is lighter or heavier than it is currently set so it can be adjusted to your needs. Would recommend to someone looking for a dual monitor setup whether it be for work or gaming.

This dual monitor stand worked really well for my setup and was fairly easy to assemble. The instructions were clear enough that the whole installation only took a short time, and all the necessary mounting hardware was included. The build feels solid and stable, even with two monitors attached, and the gas-spring arms move smoothly without sagging. It is simple to adjust height, tilt, and rotation, so getting both screens aligned at a comfortable viewing angle is quick. The stand also helps keep the desk tidy, thanks to the built-in cable management and the way it frees up space under the monitors. Overall, it is a great value if you want a sturdy, flexible dual-monitor arm that is easy to put together and adjust.

I bought it in 2021 and I want to give a review after a year of using. I have read people issue and one thing I feel like they misunderstand the product is the arms keep falling down because of weight of monitor. I use two 27” MSI curve monitors and have no issue with it. I tighten the joint that closest to monitor using allen key provided (there are screw adjustment of tightness) and also every pivot point has screw adjustment and you can use allen key provided to tight it. I have not tried 32” monitor but I think this mount can handle the weight, maybe just one monitor as both 2 arms may not stretch out for the width of two 32” monitors. So, I recommend this product for two 27” monitors or smaller, if you need two monitors on this mount.

More than I expected. Very smooth motion. Very good quality Durable

Ottima qualita' costruttiva, facile da montare, solido. Lo uso con 2 monitor Dell da 27" e le braccia reggono facilmente il peso. Vi sono molti prodotti simili tra cui scegliere non so se questo e' il migliore ma sono molto soddisfatto.

Brazo para soportar monitor excelente. Al principio la instalación es difícil si nunca has hecho una, pero después de leer un poco el manual y darle unos minutos puedes ser capaz de instalarlo completamente solo, me tomó al rededor de 2-3h porque nunca habia instalado algo similar. Pero una vez instalado, el soporte está increíble, la maniobrabilidad es más de la que pensé y libera MUCHISIMO espacio del escritorio, de verdad, muchísimo