Corsair Graphite Series 780T Full Tower PC Case - White

I bought this when I upgraded from air cooling to liquid cooling. This held my massive 360mm cooler just fine. This case, along with my cooler puts my i7-7700k at 27 to 29 Celsius at idle. And under load, it stays around the mid to upper 60s, for games like Far Cry 5 with all settings at ultra and 60 fps thanks to the Gtx 1080 I have in the build. Under lower load, like Marvel Alliance for example, I think I was at 40 degrees Celsius. Great quality case. I LOVE that the sides open like car door handles. Makes it super easy to get in there and work on stuff and change stuff out. Here are the only negatives I found on this case: The trays for HDDs and SSDs seem a little too flexy for my liking but the seem strong enough. My radiator had 6 fans, 3 on top and 3 below. The bottom ones were easy, but mounting the 3 tops ones to the radiator through the top was a PITA. Once it was done though, it looked very nice. And they work great. Lastly, and this is just a preference thing, a PSU shroud would have been realllllllyyyyy nice. There are aftermarket ones, but it's just a bummer to have such a sweet case with great visibility to the guts and then see all the PSU wires. Other than those small things, the case is fantastic. I didn't feel that any of those issues are enough to knock off a star. I would highly recommend this case to anyone.

I absolutely love this case. I first ordered one for a friend whom asked me to build him a computer. I picked this case for him and after I received it and got everything together I just had to have one myself! Yes, IT IS A VERY LARGE CASE, but if you have room for it, it's definitely worth it. Other reviews mentioned problems with the side panels, personally I haven't had any issue with them. Aside from size, my initial reaction was how quiet it was, even with all 3 fans (5 if you include CPU fan and PSU fan, 7 if you also have a GPU with 2 fans). It covers with three fans (two from intake, one rear exhaust). You can connect 5 fans to the cases power cable to control the speed with the case. The case has additional fan support all over the place, top, bottom, front (take out 2 stock 140mms put in 3x120mm). Cable management is very good. Plethora of HDD space as well as 3 SSD trays and two optical drives. As I said earlier, plenty of room for additional cooling, whether it's fans or liquid cooling.

She's a big one! This case is almost certain to be bigger than anyting you have had in the past! For me, that is what I wanted. A large case ensures that as technology and budget increases I can add more complex and sizable components to my rig without compromising space or air flow. With the amount of space in this sucker I don't have to worry about that! Internally it is very sturdy and intuitive to work with. I had a very easy time installing all the components for my new rig. Being able to remove unnecessary drive bays was a huge plus! And the cable management was fairly easy and streamlined. My only real complaint is that the back panel doesn't like to stay flush with the case once all the cords are fed through and your build ready to go. Any pressure from the inside from the cables causes a corner of the panel to slightly gap from the case. The panel still stays attached but it allows you to slightly see inside which is not ideal when you spent a lot of money and time building a PC that not only runs like a beast but look sexy as hell! It's a fairly nitpicky complaint and doesn't affect functionality. I was able to get my panel to stay flush with a little bit of strategically-placed tape, which you can't even see. In the end it wasn't enough for me to knock off a star from my rating. So that should tell you about how much I like this case!

I absolutely love this case. It is much bigger then i thought it would be and that is causing me some problems with the placement of the computer BUT the case is so well built and great that il just need to improvise and create a better home for this wonderful case. +Lots and Lots of room. +Plenty of airflow. +Easy pull out,pop out dust covers. +Nice lighting for the fans. +Side panels are easy to open and even more important easy to put back. +Easy to reach ports and headphone jacks. +Sexy AF looking. +Easy cable management. +Did i mention this case has alot of room?? -Reset button to the right of the power on/off button does not light up which makes it look a little uneven since there is lighting for the fan levels to the left. (That is really the only negative i can think of and it is not much of a negative. Just something picky since i am kinda OCD about things like that.

Can't praise it enough. I bought one for the new X99A setup that replaces the SandyBridge in a Corsair 800D rig. That largely works and will be given to a nephew after it goes into a 2nd such tower (both with Corsair 100iV2 coolers). The Sandy Bridge has 2 drive failures so it's time to replace them, rebuild, put in a bigger SSD (keep the working 240G for scratchpad use) and give it to a nephew. If he decides to add something, this case makes it easy. The Sandy Bridge days, including the then-state-of-the-art 800D, barely had USB 3 (bridged) and SATA 3 was new enough that the 800D didn't support it. So the new case address things I really couldn't buy in a flagship level case back then. The SSD mounts are as easy as they look. Fans are plentiful, and I added one to the bottom. Full Tower is easiest with larger coolers - room to work - and I like the top & bottom grommets that a mid tower doesn't have room for (possibly one, not both). As for fan controller, it works well, but wiring going all over is clunky so the extra fan was just connected to the motherboard. The fan wires - meaning for each fan - are not sleeved so the 3 wires splay out until you zip tie them. It's messy - and thus the motherboard fan connector use for the bottom fan. Things fit well - the case is a quality piece of hardware. Highly recommended.

Excelente caja, el diseño es espectacular, el espacio de dentro es asombroso, la parte de atrás es muy amplia para poder organizar los cables y que quede lo más cuco posible. También se pueden colocar ssd en la parte posterior (3 en concreto). Los ventiladores de serie son suficientes para tener una buena refrigeración en la caja, pero da posibilidades de poner más en la parte inferior y superior de la caja (12 y 14 cm los ventiladores). Importante!!! Todos los ventiladores que pongas tendrás que asegurarte que tienes el sistema de clip para ponerlo, no van atornillados. Aunque vale cualquier fuente de alimentación, es recomendable por estética y practicidad que penséis en poneros una modular. La única pega que le veo es las bahías para meter los discos duros son algo endebles y que si eres una persona que te llevas el pc a alguna campus estás muy expuesto a que te quiten algo, ya que no tiene ningún tipo de tornillo ni anclaje de seguridad para que no te puedan abrir la caja. En conclusión es una caja para tirar millas con ella, cambiarás muchas veces de pc pero seguramente esta caja siga contigo por muchos años. La recomiendo encarecidamente.

I was really fed up of using a small cabinet, where the wires often got entangled with each other. The case I used initially had very limited scope for cable management. The result - heat shut downs and stutters, especially when playing graphic intensive games or doing some serious HD video rendering. I saw this cabinet, did my research (for a good 3 weeks!) and then decided to take the plunge. When the case arrived, I was astonished to see its actual size. It looks like one of the turbines to some interstellar vessel. The space inside is amazingly huge. There are dedicated grommets for cable management, dedicated bays for HDDs and SSDs. This cabinet can fit any size motherboard. My current motherboard looks almost inconsequential when placed inside it. The easy to remove side panels and dedicated dust filters make it really easy to clean, without having to open out the entire case. There is plenty of scope for liquid cooling solution, multiple fans (I counted the possibility of mounting at least 9 small size fans!) up to 6 HDDs and 3 SSDs! This case can also easily handle quad GPU Solutions as well. The only downside is that some more lights could have made it really look like something from outer space!. The price is a bit on the higher side, but it's totally worth it. I thoroughly recommend it.

J'ai vraiment hésité vu le prix, il y a tellement de modèles plus abordables. C'est un investissement à long terme. Mon boîtier précédent (taille grand tour) date de 2000 ou 2001 bref 20 ans qu'il me suis partout dans toutes mes configs mais fini par ne plus pouvoir accepter les nouveaux radiateurs pour gamer. Ce nouveau boîtier est parti pour au moins 20 ans et perdura même après moi je pense :D Attention il est vraiment imposant, à 2 cm prêt il ne passait pas sous mon bureau. Que dire, de la place, de la place et encore plus de place, ça respire et que c'est facile d'intervenir sur un élément. le management des câbles se fait sans problème à une petite exception près : les 3 SSD coté câblage gênent un peu avec le câblage des baies de disques mais sans plus que ça. Choisi aussi pour le nombre d'emplacement de disques je n'ai déjà plus de place (9 disques + un M2), j'ai remarqué qu'il était possible de rajouté une baie de 3 emplacements supplémentaire. J'ai trouvé la réf (CC-8930032) et commandé directement sur le site constructeur pour 9€ environ + 9€ de frais de port. Montage impeccable. Les berceaux amovible sont géniaux car il permettent d’accueillir au choix des disques de 3.5 ou 2.5 pouces. Le panneau supérieur et la façade sont équipé de filtre limitant bien la poussière qui est déjà visible au bout de 3 semaines mais c'est pas tout, le fond aussi est équipé d'un filtre divisé en 2 petits tiroirs pour pouvoir les nettoyer sans bouger la tour (enfin celui qui se retire vers l'arrière ... à voir). Actuellement je l'utilise avec les 3 ventilateurs (3 fils) d'origine et même a pleine vitesse cela reste très silencieux. Ce qui me dérange un peu c'est qu'ils sont pilotés par le sélecteur de vitesse sur le control panel et non pas par la carte mère. En pleine partie de gaming la vitesse de refroidissement ne s'ajuste pas automatiquement, donc je pense rajouter au moins 2 ventilateur de 14cm PWM (4 fils) et les ré-agencer pour plus de sécurité. La place ne manque pas avec ses nombreuses configuration possible. Finalement j'en suis très content, un look sympa tout en restant sobre et quel bonheur lors des interventions post montage. J'ai installé une carte contrôleur 8x SATA et rajouté les câbles sans difficulté.

Hallo zusammen, es geht um das Gehäuse von Corsair, Modell Series 780T. Pro: - recht geräumig, auch für große Kühler genug Platz - unkomplizierte Lüftersteuerung integriert - elegantes Design - Verschiedene Lüfterkonfigurationen möglich - die vorhandenen Lüfter sind recht leise und haben guten Luftdurchsatz. - Die Seitenwände kann man auch gegenüberliegend positionieren (linke Wand auf die rechte Seite, rechte Wand auf die linke Seite). Sind beide kompatibel zueinander. Contra: - wie in anderen Rezensionen schon erwähnt wurde, war auch bei mir das rechte Seitenteil (ohne Fenster) nicht ganz korrekt "gestanzt" worden. Leicht verbogen. Wenn aber das Seitenteil an seiner Position am Gehäuse ist, dann fällt das nicht so sehr ins Gewicht. Ein geringer Spaltmaß ist vorhanden, jedoch kann man darüber hinweg sehen. Es ist ja ein Tower-Gehäuse und kein Show-Gehäuse. Fazit: Mit den richtigen Lüftern und einer guten Schalldämmung, ist das Gehäuse perfekt zum zocken, auch im Sommer und mit "hitziger" Hardware wie zum Beispiel einer M.2 SSD, welche ja viel Abwärme produziert. Alles kein Problem für diesen 780T. Voreingebaute Lüfter sind nicht laut, aber auch nicht besonders leise unter Last. Aber wenn man diese mixt mit Highend-Lüfter, dann hat man ein gutes Setup. Kaufempfehlung!

Ne ho visti a decine prima di comprare il mio nuovo case e avevo scartato questo, troppo costoso, piccolo e dalle immagini non mi sembrava neanche un granché ed ho comprato un case più grande ed ingombrante buttando i miei soldi perché un'informazione che raramente troverete sui siti internet dei produttori è la dimensione degli spazi interni infatti al crescere delle dimensioni esterne spesso quelle interne o non cambiano o sono occupate da una costruzione anche interna più voluminosa per non parlare delle informazioni errate che si trovano anche sui siti ufficiali di fascia alta-altissima. Anche il sito Corsair di questo case non riporta informazioni complete e sarete costretti a video su youtube e calcoli di proporzioni con componenti standard per scoprire le dimensione e gli agganci interni e per non prendermi responsabilità che non voglio anche io vi rimando a questa esperienza però se volete montare un raffreddamento a liquido di una certa dimensione quasi sicuramente avete trovato quello che fa per voi!!! I radiatori si possono montare all'interno sia in alto che davanti e sembra che supporti tutti i tipi di spessore senza problemi, le mascherine delle ventole sono dotate di filtri e smontabili con un click senza giravite. I cassetti degli harddisk da 3.5 sono smontabili e potete togliere metà della colonna, spostarla dalla solita posizione ad una centrale per avere sia il radiatore che molti hard disk o fare come me toglierla del tutto per metterci una bella vaschetta a tubo da più di 30 centimetri. Troverete in verticale 3 alloggi per hd da 2.5 smontabili sul retro del case estremamente comodi. Ricordate che i reservoir a tubo non rispettano standard quindi bisogna adattarli al case e nel mio caso ho inserito un "XSPC D5 Photon 270 Reservoir/Pump Combo" (dimesioni 350 x 85 x 85mm) fissandolo con le viti al pannello frontale dove si agganciano le ventole (2 fornite con il case) ma modificando la grande placca di fissaggio del tubo con dei fori per adattarsi a quelli di questo case. La costruzione è più robusta di quello che sembri e sebbene la qualità delle coperture in plastica sia sopra la media, come potrete vedere dalle immagini, non combaciano perfettamente per qualche millimetro ma sempre meglio di altri concorrenti. C'è qualche lamentela sulla colonna HD che sembra non proprio saldissima ma al giorno d'oggi se necessitate di tutti quegli hd penso che avete scelto la strada sbagliata, troppo calore inutile nel case, meglio portare tutti quei dati in un nas con 2 hd capienti. Gli inserti in gomma sotto i piedi invece non sono minimamente all'altezza, sottili, troppo morbidi e male alloggiati e sebbene il 99% delle persone non se ne accorgeranno minimamente sono un difetto per fortuna facilmente risolvibile grazie ad un ottima costruzione delle due grandi staffe dei piedi, comprate un pad tagliabile anti vibrazione o come me delle strisce in gomma nere (quelle isolanti per infissi) da 4 euro che si adattano alla perfezione. Il design e le luci sono "eleganti" per quanto lo possa essere un PC e sebbene l'interno sia spazioso, anche grazie alla colonna hd removibile, gli spessori molto contenuti delle coperture rendono l'esterno contenuto e non ingombrante che unito ad un design smussato sia avanti che sul retro rendono la struttura poco pesante alla vista riducendone l'impressione di ingombro. Penso sinceramente che sia uno dei migliori case mai costruiti, forse il migliore