monTEK No-Lift Swivel Bike Wall Mount, Bike Hangers for Garage, 1 Pack | Space-saving bike storage rack pivots 120°; 4 settings fit 16-29 in wheels and tires up to 3.54 in wide; holds 77 lb each

I'm rating this 5 stars because of its value compared to name brand options like the steadyrack. I purchased the 4-pack which was 110 dollars with the coupon. For that price, these are unbeatable. These are so much better than the racks that hook onto your front wheel for a variety of reasons. It's safer for your bike, easier to load, is more secure when you pivot it. I'll address some of the negative reviews which seem like they are either fake reviews or are coming from ignorance. Someone said they don't fit 28" wheels: First off, I'm not sure where you got 28" wheels, but I can confirm that these fit a variety of wheel and tire sizes, from 29" plus size mountain bike tires to skinny 27.5" road tires and about everything in between. Someone said they were confused on lack of packaging and the rear tire mount: These are dead simple to install, it's just two bolts for the main rack and two bolts for the bottom rack. If you can't figure that out, I'm sorry but it's on you. Secondly, the only point of the rear tire holder is just to provide some resistance for the rear wheel when you pivot the bike so it stays on place and doesn't slide across your wall. To everyone saying that the handlebars pivot when the wheel is inserted: DUHHH. Obviously if it's going to accommodate so many tire sizes, then your handlebar is going to pivot to one side once inserted. All in all, for 110 bucks, the 4-pack is a steal and saves a ton of room in my 1-car garage. Totally worth it.

I went back and forth on a couple mounting options including horizontal wall mounting. I settled on this monTEK swivel as i was mounting on a concrete block wall and felt comfortable; I've had a garage rail style rack which pulled out of the drywall. These racks mounted easily and solidly. I experimented with staggering the mounts a bit but I didn't get any better result that with the racks right next to each other. I had to mount them about 16-18" apart minimum to allow for handlebar clearance and entry into the rack. The bikes sit a good amount away from the wall, i'd argue they stick out further than if they were just horizontal. I wanted to mention this as i was looking to park a vehicle in a single car garage space and that 'off-the-wall' distance was important to me. Either way, excellent rack system, make sure you mount them well and strong, and you'll be happy with them. Well constructed, feels comfortable with the bike on there. Recommend.

This worked great for my 29er mountain bike with fender and 2.5" wide front tire. The instructions say to adjust the arm length to the longest position for a 29er, except that didn't work with the fender. So I just adjusted it one hole shorter, and all good! I mounted it so the bike tire is about 3/4" off the ground, which makes putting the bike on/off easy. It feels sturdy, and I love how you can swing the bike toward the wall to reduce space taken up in the garage.

Love the swivel, easy to load and unload bikes

Great product at a great value. I never write reviews but this product punches so far above its cost I have to. Family recently got into mountain biking and the biggest pain was storage as the bikes don’t have kick stands and take a ton of floor space even when leaned. This compresses all 4 bikes into the space that just one of the 29” bikes would take up on the floor. Being able to “page” through the bikes as well so they don’t become tangled is a huge benefit. Everyone from the adults down to our 6yo can retrieve their own bike easily and not drop or get tangled into another bike. Second benefit of being stored vertically is the seats become a default helmet rack so everyone always grabs and automatically puts on their helmet as the first task to bike riding! I put each on the wall 16” on center (you can see the studs behind the plywood panel) and they do not get in the way of each other. The swing is definitely a bit more limited than the full range advertised when put this close but I think it’s well worth the trade to put 4 bikes onto 4 studs. Time will tell their durability but we are currently using them every day for the two 29” bikes, one 27.5” bike, and one 20” bike. When my 4yo upgrades to a 20”, I will want one more to have all 5 bikes mounted! All said, could not be happier to have all 4 of these bikes stored for a very reasonable cost!

They could be a little more heavy duty but they are very easy to install and have been a great addition for my bikes so far.

As others have noted, the soft metal bolts that you need to remove to adjust the arm are over-tight and easily stripped. I had to use channel-lock pliers to remove; I should have sent it back because of this. Once up, the slot for the uppermost tire is very wide so that my road bike hangs a bit cock-eyed. I will probably add some wood shims at some point Also, the bottom bracket is not slotted to hold the tire in place but is instead a protruding tab and the tire sets next to it. It doesn't keep the lower part of the bike from swinging around if bumped. Overall, I don't really see how it is much of an improvement over the simple wall hook.

Can fit the whole family's bikes in the garage and get one out without having move everything to get to the one in the back.

Easy to get the bikes in and out of the mounts. Nice to have the ability to swivel the bikes out of the way. Accommodates all tire sizes with one small issue, For 29" and 700c wheels the tire of the bike does not fit into the cutout at the wall end so the front wheel flops around, not a big issue though. Quick installation and heavy duty build quality.

These have been really great in my garage - they've got a solid hold of my bikes, easy to get in and out, the swivel works really well, and they're a much more cost-effective solution than some other brands - I got the 4-pack. The wheel can turn slightly putting a tilt on your handlebars, but I haven't found that to have any negative impact. I'm using mine mostly for mountain bikes with wider tires.

Cette article est incroyable, facile à installer et fait parfaitement, très solide.

Easy to install and works great, bikes lay almost flat against wall if spaced. Easy to follow instructions for set up. Would 100% recommend and price is good compared to others on the market.

I would give it 5 stars except for a couple of smallish issues. The first is the entry point for the wheel, the V that holds the two arms together where the tire roles onto the rack. This could be thinner and angled in such a way to give more distance between the bottom and your frame of the bike. This really is only a potential concern for a road bike where the tire and frame are close together. The one picture shows how close it gets on that bike but when it was hung the spacing was better. On one of my other bikes though, a high end carbon bike, the difference is a couple of millimetres. The second is that the tire of the bike does not fit into the cutout at the wall end so the front wheel flops around. To solve this you need to add some blocks on either side of the tire and you are golden. I 3D Printed blocks to help with this (see pictures) but you could use simple wood blocks screwed in from the side slots. I really do like this rack in that it does not put stress on the wheel like most of the hangers do. It handles any size of wheel and tire and makes loading bikes a snap, and then they can easily be swung from side to side. My wife can now roll her eBike right onto the rack with little effort. No more trying to get the wheel into the hook. No more worrying that the valve stem might get in the way. Simply roll the bike on and off while it rides on the back wheel. This rack is the best I have used to date for mounting on the wall.