Honeywell Home CT87K1004 The Round Heat Only Manual Thermostat,Large,White,Large | CT87K1004

Easy to install, and simple to adjust.

Good thermostat and easy to hook up.

Had old 70 yr old type thermostate with mercury switch replaced it with this. It only had 2 wires a white and purple.According to instructions the white wire connected to r terminal and the purple to the w terminal. Been testing it outAnd seems to control the gas home furnace correct. To my surprize it went better and easier than expected.

I'm using this thermostat on a 12v RV system. Simple, heat only. Nothing in the product information states it needs 24v and online many people have used 24v thermostats in RVs. Installed it. Bit of a hassle because they make the screws sooooo small and the openings the screws go into soooo small that I needed to use a pair of jewlers screwdrivers to fit the screws and openings. I tested the thermostat and it didn't work. I checked all my connections and jumped between the two terminals on the thermostat base and it fired right up. So, must be the actual thermostat itself. I call tech support, which is outsourced to a third party company, 5 min after they open and am greeted by a voice that sounds like a 1990 attempt at text to speech. I was then transferred and the hold music was some highly annoying techno music. I waited 12 minutes for a representative before finally trying to choose the option to "save my line in the que and call me back later", but that option didn't work (three times!). I hung up and called back, and this time the option to "save my place" and call me back worked. It's been over an hour and I'm still waiting. Even if the thermostat doesn't work with a 12v system, the product information should state what system voltages it does work with (doesn't even mention 24v). Yet, the biggest reason not to choose Honeywell is customer support is annoying and essientially non-existent. So, while Honeywell may have a strong name and share of the market, their most basic and simple model, along with their out-sourced customer non-support, leaves me in the cold. I'm going to return the thermostat and get a different brand.

See the review by John, 2-17-13 for an explanation of the (rare..) use of the 10+ year-life battery inside, as is there to 1) reset after a power failure and 2) initially after install: to charge up a capacitor which actually feeds the internal electronics and which is constantly replenished by the 24-28 V. AC power delivered usually by the furnace electrics when its own power is on (24/7.) Those 24~28 Volts A/C come via a small step-down transformer usually located within the furnace box.That said, recently I did have an -87K unit fail after some 4-5 years (I have no *reliable* info on the failure rates on the hundreds of thousands of these units in service, and individual guesstimates are useless/just gossip.) As I “do electronics” I naturally performed a necropsy on unit. The nominal 3 V battery in that was near-new at 3.22V on a Fluke prof. meter; it did not die via “battery failure”—see above, again—the few occasions where its small power input would actually be missed. I still wanted the natural simplicity of the glass-sealed mercury capsule, but I do realize that the mission of a thermostat/in 2018 is trivial to design and I Saw that the circuit board in my failed unit is comparable quality to that seen in prof. grade test equipment: so I was just unlucky in this early failure (most failures happen on initial turn-on, then ..during first days/weeks until: they go a long….time and then fail for complex reasons.) Four or so years IS … unexpected. Hence the 4-stars, pending..I just bought another -87K unit from Amazon. It was a 3-second “drop it in and carefully press down till it latches” operation (no wiring had to be done.) I left it alone with temp turned all the way down for 5 min. or so: letting that capacitor charge up to its working voltage from the battery. While it’s only been a couple days, it is doing exactly what you want it to do: silently switch on the permission for furnace to take over. Note that: the manner/temperatures at which the furnace decides finally *to turn OFF* its blower motor is Not anything to do with the thermostat’s ON/OFF decisions: a variety of means are engineered within furnace controls to cover this so-called “hysteresis” time + temp process. Your thermostat is an ON/OFF switch ONLY.I’ll drop in and modify this report should this new unit fail shortly (unless, of course: many are already in caves, say? No reports then. No furnaces either.)

It works well.This is a nice improvement from the old mercury switch models.

I have a very old Warm Morning wall furnace that my grandfather put in the house nearly 50 years ago.I needed a new thermostadt because with the one that had been installed by a local repair man was way off on the settings.You could set that thermostadt on 68 degrees and the furnace would not shut off till it hit 75 degrees or come back on till it dropped down to 68. I put up with that for several years and finally had enough of that.I knew what I needed and instead of calling another repairman who was half the age of the furnace I started looking for what I knew to be realiable and that was the Honeywell heat only thermostadt.No one had it for heat only but Amazon.com had it for $29.00 plus free shipping.I placed the order and had the thermostadt in a few days and put it on. They are a little different than the old ones but the results are the same.You can set this one on 70 degrees and when it hits that point the furnace shuts off. It will drop 2 degrees to 68 and come back on and that's perfect. My old house is so much more comfortable now and I'm saving money to boot.If you need a single purpose thermostadt for an old furnace this is the one to buy. Skip the rest and buy the best for less than 30 bucks.

I really cannot comment on its quality other than to note it was a straight replacement for the one that was here. The baseboard hot water heating system malfunctioned and “may” have shorted the old thermostat and possibly this one. The only problem was that it required a tiny screwdriver (like those in eyeglass repair kits) to tighten the wires, which might be an issue for others without such a small tool. The temperature sensor is not sensitive enough, and the room stays about two degrees warmer than the setting.The "star" rating proved problematic. It is what it is—it's not better than the previous one and (in my opinion) worse without the little mercury glass tube that older models used for temperature readings. The heating system is a basic on/off two-wire setup that requires only a simple thermostat with an on/off feature, which would be very easy and inexpensive to provide.Sometimes all the bells and whistles aren't required to do a simple job that manufacturers feel the need to "fix" when there was no problem to begin with.

très pratique pour personnes âgée

It fit and worked correctly

We bought this in the spring for our shop but then it got nice out and we never installed it. Fast forward to fall, installed it….but then the furnace wasn’t working. Called a repair guy, he was thinking it was the valve on the furnace, tested, not the valve, tested the thermostat and its thermostat that doesn’t work. Yes our fault for not figuring it out sooner, but yeah wasted a lot of $$$$ both on the thermostat and on the plumber.

after having two digital thermostats only worked half the time I now get my but up an adjust the temp my self

I like the look of the product. I realized it does not work too late to try and return for a refund. What a waste of money.