1200% Brighter LED Headlights for 1997-2018 Wrangler JK TJ LJ Hummer H1 H2 | 4 in 1 Lighting Mode, Anti Flicker, Z-Shaped, IP67 Waterproof, DOT Approved, Plug N Play

These are a great replacement to the OE headlamps. They bring an updated look to the older Jeep and provide excellent lighting of the road. The high/low beams are plug and play. A no-brainer. But to access the ring light and yellow turn indicator, you will need to splice into two wires from the turn signal. These is also not hard to do but an adaptor plug could have made it super easy. I rate them 4.5 thumbs up out of 5 only because of the bare wires.

Update 9/0/24: Seller addressed and resolved warranty. Update: Both head lights have condensation inside after about two weeks without any rain or car wash. Hopefully the seller will do something about it. The lights look really nice and easy to install on a 03 Hummer H2. I was prepared to dremel the light housing, but realized it was not necessary. Very bright at night compared to the stock lights. Can’t speak to longevity, but super nice lights and fit for the price. I spliced the turn signal into the square orange blinkers up front. Added a DRL harness to the fuse box to power the DRL. See semi complete pic.

Lights are super bright and plug and play to the existing wiring harness. However, they do not install without modification and some readjustment of the rear headlight bezel. When removing stock lights, you'll need to take out the stock rear headlight bezel and cut out the inner housing about 1.5" in from the front to allow for the deeper lamp housing. I did this with a grinder and cutting wheel insert. Not hard, but then you'll have to re-adjust the headlight direction screws. Tip: park in front of a garage and manipulate the direction before you need to get on the road for final adjustment. Lastly if the lights don't work or go on/off... I noticed that the OEM lights, and replacement halogens have a slightly thicker male port on the plug. They can lose connection if bumped or jarred by driving. To resolve, take pliers and slightly twist the male plugs on each side so they will provide better contact and won't come loose in the existing female port.

These lights are bright and add an updated look to my 2009 JKU, but these don't fit the stock mounting brackets well. I Really had to shove the driver's side light into the bracket to get it to fit. And one of the passenger side bracket cutouts broke when I was trying to fit the light into it. Currently using duct tape to hold it in place until a new set of brackets arrive. Also, as a few reviews have said, the kit isn't complete for all that the headlights advertise. You need more than what is included if you want the DRL and turn signal function from these lights. The YouTube video on these exact lights kinda goes into what you need, but even that doesn't explain everything. Seems like a decent value light, but I can't say I'd recommend these for those who are looking for plug and play. Edit: Overall, changing my review from 2 to 4 stars because of the customer service commitment and the performance of these lights. Xprite reached out to me directly to try and resolve the issues I was having, so I commend them for that, a lot of companies would have likely abandoned the issue. Also, after about a month and half of use and taking care of the bracket and the DRL and turn signal wiring stuff myself at the local O'Reilly's, I'm a fan of these lights. They perform very well in the Sacramento heat and time will tell how they perform in the Tahoe snow. What keeps it from getting to 5 stars is that I had to source other parts to get all the functionality that these lights advertised and that the fitment, for me, was rough and required purchasing another set of mounting brackets. I understand these aren't a huge deal and it only required another $30-40 in parts and a YouTube video of someone who purchased these lights walking us through the real install, but I don't think I'm too crazy for expecting the DRL wiring to be included and aid in completing the setup, even if it meant another $20 on the MSRP.

Honestly surprised at how good these look and how well they do at night. Was replacing an older set so I already had the wires run to blinkers for drl and blinker setup- install took about half an hour Only had them in a few days but will update if anything changes

The lights themselves are ok so far they function as they should. I did expect better quality for the price, but I also expected modifications from other reviews. The light doesn't fit inside the light bezel of a jk with out modifying the light or the bezel, depending on what you would rather take a power tool too. My main concern is the wiring harness though, I've got better off the discount sites. If the light are "waterproof" why would you put a POS wiring harness with it? I went and made another of better quality but I shouldn't of had to for this price.

Great looking simple install! but one died exactly 1 year from the day I installed them.

The lights installed easily. The connectors matched up fine. Splicing the turn signal was fairly straightforward. For the DLR I ran a wire back to the fuse block and installed a fuse tap. They look and work great. So much better than the old lights.

Excelente calidad de los faros. Valdria la pena que te mandaran un instructivo de conexion, pero se puede encontrar en youtube Pero el general muy bien

الطرد مفتوح أثناء الاستلام من شركة التوصيل ولكن حالة السلعة جيدة جدا

Excelente producto

UNA BASURA, se descomponen en menos de un mes. Y JAMÁS COMPREN NADA EN AMAZON! CUANDO SE DESCOMPONEN LAS COSAS TE DEJAN DESVALIDO. NO HAY GARANTÍA DESPUÉS DE 30 DÍAS. EL PEOR SERVICIO A CLIENTES DE LA VIDA. Y LA MARCA, XPRITE. NO RESPONDE. NO HAY NADIE QUE DE LA CARA. Evitense un dolor de cabeza y compren en un local establecido y una marca que te de de respaldo.