Camera Desk Mount Overhead DSLR Arm Stand Titanrig Lite Z | Double C Clamp, 17.6 lbs Load Capacity, Extra Tablet Holder, 1/4" 3/8" Screw Adapter, for Selfie Live Streaming Videography

This well made solid product in my opinion is the best one I own. I have it attached to the left side of me on the front of my art desk and have a projector facing down above my workspace. To be honest I could not be more pleased it does what says on the box and is ideal for overhead camera and phone shoots.

Solid construction and performance. I thought I would give it try judging by the positive reviews Not knowing what to expect in terms of build quality this gadget has far exceeded my expectations. Rock steady in use and fully adjustable, they also included some allen keys to adjust the knuckle joints for heavy cameras etc. It supports my Fujifilm X-T50 with ease and no wobble or vibration issues when the shutter is released. Value for money excellent, fit and finish excellent and performance also excellent. Dead easy set up too. I would recommend this to anyone looking for a good solid camera mount.

It’s a very substantial Item. I really like the table clamp which is just very secure. I’m using it for artwork with a small projector, it is perfect up to about A3 but is just not high enough to go any larger. It would be perfect with one more extension tube, however none appear to be available to buy. Overall I’m very happy with it, but it could use a little bit more height adjustment.

Super stable!

I have a Canon EOS 250D as my "webcam" in a home-office setup and it used to be mounted on an articulated arm (like an angle-poise lamp), and while it was sufficient at holding the camera; as soon as I attempted to add a teleprompter adapter for an iPad (an attempt to keep eye contact with my colleagues) it would sag and fall over. This arm mount is absolutely perfect. It's holding the weight of the camera, the teleprompter glass adapter and the iPad mini without any issues whatsoever. And it's so stable it no longer jiggles when I nudge or bump my desk (there is a gear-wheel teeth like meshing mechanism to give it extra strength and stability which work great and have a large range of position options). Excellent purchase.

Whoever designed this is absolutely, utterly, clueless. They have put a friction ball head connector on a system designed to hold a full dslr, it simply collapses under the weight of it. Articulation is split between twist knobs (fine) and allen key adjustments (utterly useless), so if you want to adjust anything, you have to go and find the damn allen key, tweak it, and then hope that it sits back where you want the field of view when you are done with it (hint: it will not). It is an utterly idiotic design that completely ruins the whole thing, it is not even possible to adjust it properly once a camera is attached as it is clearly designed for nothing more than a smart phone or light weight point and shoot on it. Hugely dissapointing product, absolutely not heavy duty, it is not even light duty with such a crap head on it, needs a proper heavy duty head, full knob adjustment rather than allen key and then it might actually be useful. Do not buy if you plan on putting a dslr on this.

Having tried many mounts this one works. As my YouTube requires me to record my camera from above it's great and allows me to move closer to my items which is great

Firstly, it’s too short. I hoped I could purchase just extra tube to extent it but I dont seem to find this option. The ball head attachment doesn’t stay still in the position I need it to so cant use it with phone holder attached or camera as its not pointing in the direction I need. It seems to only stay in 2 positions - up or down. There is no way I can see to secure it in any other position. Am I missing something? I need this to film from top of the sewing machine which is not possible at all with his. No idea why it even comes this short without option to extend it. It seems only good for people filming drawing or sketching. Cant find the way to contact the seller about it unless I claim I need refund.

Yes... good product..

This is a review update - my stand was replaced with great efficient service. As I said below this is a really well made product especially if you are wanting to hold a heavy SLR camera on it. Extremely flexible in choice of set up positions. It locks with allen keys - and the rear one just slightly awkward, but it locks really solid - a longer key makes the job easier. Desk mount is brilliant- really deep choice of thickness to attach to and the double clamp locks on really sturdy. Previous review from damaged delivery. . Bit difficult to write this review as my stand turned up used and damaged with one joint not locking at all. However I am very impressed by the flexibility and quantity of build. It’s holding a canon 6D beautifully - I just need to be able to lock the Center joint which is broken. I’ve sent it back with frustration but I’m sure it will be replaced with a new unused item. So I wanted to still recommend it if your chasing a quality study stand for a heavier camera set ups. I’ll update the review with the new item.

***UPDATE*** 2-24-26 (See bottom) While I have not used this in actual photography yet, just putting it together (easy, by the way) I was really impressed in how sturdy it is. I am used to piecing parts together and just making it work somehow, and while that may work, it's not exactly the best way. This appears to be made out of quality materials and I don't have even one minor complaint about this. Well, one... As mentioned by another Reviewer they said that it's easy to swap out the ball-head (and it is) because you will want to because in a perfect world this would already have a quality ball-head on it. I have not broken this ball-head (yet), but it is a more rinky-dink type. For mine I just stole a ball-head from an old unused mono-pod that was in my closet. It did the trick, now I don't have to get another. The way that the arms on this work it is slightly different than what most would (probably) be accustomed to, for instance, I am used to using a Magic-Arm brand that you just loosen/tighten the knob and it stays where you want it. THAT is the PERFECT design, but I no longer have my old Magic-Arm version, hence my purchase of this. I saw where one Reviewer had a problem with this one because the base stripped out, hopefully they have fixed this, that is the weakest spot on this design, and it needs to be their strongest one. The locks work well. It is stable. It is somewhat lightweight, but built like a tank, it DOES NOT feel cheaply made at all. The length and weight is approximately around the same as a typical tripod when folded. At any rate this is a really, REALLY good option for anyone that needs to use it for their DSLR or light, or, whatever you need to use for your tasks. Personally I am using mine for a GOBO and I can easily place the lighting to where it needs to go. My GOBO is approximately the weight of a standard DSLR with a 50mm lens, so it holds it fine. I don't always use my GOBO, so it may be used as a place for one of my cameras/lens to live. I am more than likely going to be buying another one of these because you can't have too much stuff. So, if you are on the fence about whether to get this or not, it is well-made, very useful, and works as you would expect it to. It is a very worthwhile piece that will surely be appreciated for years to come. ***UPDATE*** 2.-4-26 I liked it so much I had to buy another one... *****I want add something, if you have a table that this just will not fit, there are FOUR ALLEN SCREWS that will allow you to adjust it by 'about' 3/4" or so. (Use the allen wrench that has the phillips screwdriver on the end to adjust the height adjustment screw) ***I read in a Review that someone mentioned that this would not work for them due to them having a thinner base (table, etc) to put it on. (I didn't really understand how that was possible, but...)*** My first one fit on my table fine, this second one, although the screws in BOTH were adjusted the same, it would not fit without me adjusting it. Just imagine how smart I would actually be if I actually read INSTRUCTIONS, which, I still have not, I just figured it out.

Prima Ausrüstung für Bildreproduktion oder Produktfotografie etc. Sehr stabil und dazu noch echt preiswert.

Super fuerte y maciza, aguanta facil una Canon R con un 24-70