60 Gallon Sandblasting Cabinet, 40-120PSI Sand Blasting Cabinet with Stand, Heavy Duty Steel Sand Blaster with Blasting Gun & 4 Ceramic Nozzles for Paint, Stain, Rust Removal

Very nice blasting cabinet. Instructions were adequate and all the parts were included - no missing fasteners! A couple of the corners were bent from package getting dropped during shipping, but they were easily straightened out with pliers. Surprisingly, all the fastener holes aligned up properly; no issues with assembly. Speaking of assembly, although it could be done by one person, it is exponentially easier with two sets of hands. After first use of about an hour, there is a small bit of media (soda) escaping - should be easily corrected with a little bit of the sealant that was included in the package - otherwise, the factory applied foam sealing tape is doing a great job. I purchased the Vevor dust collector and installed it and it works great to keep the viewing area clear so that you can see what you are doing. I used some scrap lumber and built a rolling platform under the unit using nice casters from here and it makes it easy to roll around to store out of the way when not in use, plus increasing the height about 4-5" makes for a better angle for doing the work with your arms in the gloves - at least that's my opinion for someone that's 5'6" tall.

Very nice unit excellent price, i added the ten thousand watt reostat here, which allows for full speed adjustment, it fit my original style HF blast cabinet from the early 2010s the fully welded model prior to the screw together style, it makes a huge difference from using a vortex and shop vac, I did note the included instructions recommend not using it with silica based media, which made me scratch my head since glass bead is technically silica and many industrial cabinets or even cheap harbor freight ones are gonna use that type of media at some point.. This leads me to believe.You may need a pre filter.. But the vortex will fit in the cabinet.So maybe that would make a good pre filter.Who knows for the price?Just run it.And if it burns out, it burns out.

Zero thought design makes you wish you had just built your own. How loud is it? You will go deaf without hearing protection-that loud. So loud you won't want to turn it on. You shouldn't have to wear hearing protection to sandblast parts. Doesn't even mate up with their own 40gal cabinet so you end up with two extra pressure ports that serve no function. Terrible assembly process drilling a 2" hole in the side of thin sheet metal. It's huge. It functions but in my opinion stuff like this shouldn't even be allowed to be sold.

Works great overall! I do recommend ordering smaller blasting heads if you plan to use fine media — about 1/8 inch is ideal and smaller than the four heads included. I also bought the dust removal add-on, and I consider it a must-have upgrade. The built-in light works only intermittently and is far too dim, so I added an external LED work light on top of the viewing window for better visibility. The window seal also didn’t seal well out of the box, but applying painter’s tape around the outside fixed that issue effectively. Both the pickup and air hoses could be better quality. I plan to replace the pickup hose with a stiffer one that won’t crimp, since the kinks slow media flow (though it still works). The air hose connects with a metal clamp on a barbed fitting, which I’ve had to retighten several times—perhaps a sturdier hose would allow a more secure fit. I always disconnect the air supply when leaving the shop, just in case the nozzle hose at the gun it starts leaking again. If your compressor doesn’t already have moisture control/filtration, you’ll definitely want to add it. I picked up a 4-stage desiccant filter for under $100, and it works great. Final Note. I have purchased several products from VEVOR and despite a few issues (like those above) I feel the price and basic quality more than makes up for you for any small issues I have to fix.

I almost didn't buy this dust collector because of all the conflicting reviews but I'm glad I did. Shipping was a few days faster than advertised which was nice. I mounted this dust collector on a Harbor Freight blast cabinet. The existing hole in the cabinet was an exact fit for the dust collector. I only needed to drill four holes in the cabinet to get it 100% mounted. I think I only spent 10 minutes getting it installed and I was up and running. It works perfectly. I only have a few hours on it so far but it works great. I was using a 5hp Shop Vac for two years and this works better by far. It is easier to reclaim blast material out of the dust collector. A Shop Vac is about the same price as this dust collector. Other reviewers complain about noise. It is loud but not unusually loud for a vacuum/ dust collector used in industry. My 5hp Shop Vac was just as loud as is every other Shop Vac I ever used of that size. I always used hearing protection before and I do need to now with this dust collector. It is loud but that is how this type of equipment is. I sand blast as part of my business and do it many times a week hours at a time. I don't have an issue with this unit. We'll see how long it lasts. I'm happy with it. Contrary to other reviewers I think installation was fast and simple, noise level is typical, and performance for the size and price point is in line with what you get.

Came in with minor damage. a few bent corners, a little scratched paint, and NO instructions. Had to watch the video on the amazon page. Kinda like an IKEA blast cabinet. Lots of little screws. Majority of the holes in the panels were too small for the screws provided so had to drill most of them out a couple sizes larger. BUT, it works, which I guess is the most important part. I just connected a shop vac to the vent which did help with visibility while blasting. It DOES leak some blast media even after sealing off all seams with silicone, but not enough to be an issue. Does NOT come with enough hardware to complete assembly, will require a trip to the hardware store to complete. Decent buy for blasting smaller parts. No real complaints.

I just installed this item on a Harbor Freight glass bead cabinet. I used rivnuts and put the extra mounting plate on the inside of the cabinet. After the installation, I have no leaks whatsoever. One gripe - the mounting bolt pattern is too small to get a screwdriver straight at the screw. Annoying, all it would take to make this an absurdly easy installation is move the bolt pattern out a little, give room to get straight at the screws.. As far as the noise, I put a speed reducer on it so it can be turned down to about half speed. I also found a WIX 42736 air filter (for a 2005 Chevy Cobalt) fits if you drill a hole in the top for the stud to stick through.

Damaged in shipping, missing hardware, and instructions were just bad in general!

Tutto bene grazie

Had to modify my powerfist cabinet but it worked super well. Needs to have the filters shaken and cleaned (not replaced, just smacked a little) every 1-2 hours of blasting. Creates negative pressure which is great for dust collection

High Quality. Very heavy. Works great

Muito útil

Fungerar över förväntan 😃