Bike Water Bottle Holder, Black or White Gloss, Secure Retention System, No Lost Bottles, Lightweight and Strong Bicycle Bottle Cage, Quick and Easy to Mount, Great for Road and Mountain Bikes.

I read all the reviews and ordered two of these cages for an XLab Superwing. Install was the same as any cage and they seemed to fit well. First ride, I lost a bottle when I hit a mild pothole. Go back to get the bottle and put it in the cage and it was totally deformed, less than 20 miles into my first ride with them. Since I've owned them, I constantly bend them so they are tight and by the end of my ride, they are loose and losing bottles. Highly recommend avoiding these cages and looking elsewhere. I finally broke down and ordered new cages after losing a bottle this morning which I didn't realize was lost.......

Some full-suspension mountain bikes don't allow for a larger water bottle because the water cage is mounted too high (probably for clearance for the rear suspension). On my bike (Trek Fuel EX 7), there's plenty of clearance for the suspension (even when compressed), such that the water bottle could sit lower. However, nobody seems to make a water bottle cage that sits lower. So, I found this one that has a solid back that I could drill a new mounting hole into, allowing the water bottle cage to sit about 1.5" lower, allowing for a larger water bottle. Now, I can easily fit a 33 oz. water bottle.The material was easy to drill through (seems like some aluminum alloy). The water bottle cage comes with low-profile screws. A low-profile screw is necessary if placing it at the top of the cage as I did, so it doesn't interfere with the water bottle. I backed the new hole with a rubber washer, since that part of the back plane doesn't rest flush on the frame.Aside from being "hackable", the cage seems to be well-made. The material is strong and relatively light-weight. The cage with screws weighs just 55 grams. My last cage (typical wire-frame aluminum) weighted 72 grams with screws. Unlike plastic cages, this one can be adjusted to hug the water bottle tighter (if you ride on rough terrain) or looser (if you ride road). You just need to pull the two tabs apart gently or squeeze them together to bend them a bit.Happy riding! Keep the rubber side down!

Great MTB cage. WAY better than alloy/tubular type cages that drop bottles in rough terrain; this holds—with no movement—in rock gardens and fast, rocky descents. This cage fits tight over a CamelBak Podium Big Chill Insulated Water Bottle (25 oz.) and I feel it could hold an even bigger bottle. Most bottles have a cavity that the prong fits into nicely and helps with longitudinal movement (see the attached image). Laterally, it's simply tight, wrapping your bottle. I suppose there might be equivalents of "known" brands, but this one looks great, is alloy and holds really well. This manufacturer ought to send some samples to the likes of BIKE, Singletracks, etc., and have their product tested against the brands. It'd hold up for sure.

THIS WATER BOTTLE CAGE IS AWESOME!!!!!!! I've been a cyclist for 41 years, and I can say with all confidence that this is best! First off this cage will hold the short and long water bottles, it also holds firm enough to handle most off road conditions. You will also be pleased to know that its much more shiny than in the picture, due to the powder coating, and stated tumble polishing. Its not flimsy like most cages in the past and nowadays (If you didn't know it has a LIFETIME WARRANTY) most cages are complete junk.I plan on buying one more for my bike, as well as two more for my wife's bicycle.

This holder comes with NO instructions, no screws to help you install, and there really is no place to put this where holes are already available on your bike. Short of having to drill holes, it's useless.

Works great. I had to bend it a bit to get my drink container to fit, but after that it has worked great for the last several hundred miles. Easy to slip my drink in and out of one handed, and has never lost my drink, even when I went head first into a tree.

After researching online and watching multiple review videos on utube I decided on this PRO Bike Tool. It arrived today along with the water bottle also ordered (from a different vendor) and the bottle fits very securely in this holder. HOWEVER, the 2 stainless steel bolts were missing. Have to have those to mount on the bike frame. Yes, I double checked the box and packaging. I have contacted PRO Bike Tools support; will see how they remedy the omission. That is the only reason I cannot give a 5 star 🌟 rating.UPDATE: 🌟 🌟🌟🌟🌟 I contacted PRO Bike Tools Service about the missing screws. They immediately responded and after a couple of questions and order verification I received a new Bottle Holder WITH the SS screws included!

I was extremely unhappy with the bike bottle holder when I screwed it in, the screws it came with broke off into my bike frame and I couldn't get them out. Now I'm stuck with screws in a bike frame that I have no clue how to remove and also when I did screw it onto my frame finally, when I rode it stuck out where it lifted my pant leg (I was wearing skinny straight jeans, I'm keenly aware of pant legging and reasons people wear wraps around their legs to protect their pants and them from getting "wrecked"). Needless to say the frame of the bottle holder bent and I was unhappy pretty quickly. I do however still have it on my bike, when my water bottle is ON my bike it doesn't seem to stick out, but for some reason it sticks out a lot when it's not holding anything.I was trying to contact seller before writing my review but was unable to figure out how to. So here is my review sadly.

I just liked the look of this bottle holder. I feel you get what you pay for and I'm very happy with this one. This looks great on my bike and fits in with the Bike colour scheme. Its a quality product and rather than being made in plastic, this is in machined aluminum alloy. Holds my bottles perfectly. Very pleased!

Beautiful bottle cages!! They are really sturdy and really excellent value. When they arrive, you may initially think that they are too tight for your bottles, but you can gently pull the wings out a little bit as they’re made of aluminium alloy, then they will fit bigger bottles like a SIS 800ml bottle. Personally prefer these to the elite cages that have grips, as you can grab your bottle on the go. The gloss black really goes well with my Canyon road bike I have two for myself and one for my partner :)

I was shocked to find how small and narrow this holder is. It is a simple holder, but no way does it warrant the £24 reduced to £15 price tag. The holder is too small for the excellent quality Camelbak 750ml bottle I bought for it. A complete waste of money and destined for the recycle bin. The bracket is only 75mm in diameter and is only suitable for a small bottle.

I didn't need to contact the seller but they emailed me to make sure I was satisfied and to provide contact details in the event there was a problem. This I thought was a very nice touch. So far there hasn't been any problems and all seems to be as I expected and this looks to be a very good product and was extremely easy to fit to the bike. If all their products are like this I'd have no hesitation in ordering from them again.

Brilliant! The last bottle holder I had was gripped all around making it impossible to remove the bottle without 2 hands - tricky! This one is a million times better and has just the right amount of grip, and not too much, to allow for single handed access when cycling.