Aivituvin Outdoor Storage Shed Upgraded with Strong Metal Frame Garden Tool Shed Storage House Cabinet with Adjustable Shelfs and Wooden Floor 4.6 x 2.42FT (Brown)

I bought this shed for gardening tools. It replaces a resin shed that never gave me satisfaction. I was looking for an alternative to galvanized metal or plastic resin sheds. The galvanized ones get dinked easily, have flimsy panels, have sharp edges (and taking the protective plastic film off the surfaces is a real chore). They are inexpensive but look cheap to me. Resin ones never quite fit together. They break easily, especially at the hinges. They’re environmentally terrible (having taken a truckload of waste plastic panels from my earlier shed to the dump…). This one is entirely wood (with a steel frame). It looks like stained pine, and the quality of the wood is pretty good (minimal knits in the wood). I think it looks great once assembled. 👍🏻👍🏻👍🏻 I got the light grey one and it looks great. (I think the wood colored one is not as classy). The shed comes with a floor and 2 shelves. The shelves are adjustable and are only half the depth of the shed — so you can store long gardening tools as well. 👍🏻 Packaging (2 boxes) was solid. All the panels are wrapped in protective fabric. All the parts were in the kit, all the hardware (some extra screws…). 👍🏻 Assembly: I assembled by myself. I’m pretty handy around the house. This doesn’t require special skills, just screwing the provided screws. A drill with screwdriver attachment is recommended because of the high screw count. All the panels are stamped with a letter. All hardware comes in labeled bags. The provided panels mount on a solid steel frame. Provides great structural integrity. By and large, the panels are properly toleranced and mount perfectly. Only the doors left some to be desired…. Mine were not completely square… Pre-drilled screw locations in the panels are provided but sometimes hard to see. Look very carefully. 👍🏻 It took me about 4 hours, taking it easy. (That includes having to undo and redo some steps…). Having a helper to hold the doors while fastening them would have been nice (but not absolutely required). Tips: — as you can see in photos, I mounted the shed on some concrete blocks ($2.39 each at Home Depot). I highly recommend this. Firstly, the provided floor is wood and you don’t want wood too close to the earth. Secondly, lifting the shed 8-20 inches off the ground makes it much more ergonomic. Higher to head level and bottom not as low. — the instructions (IKEA-style) are fine but you need to be very careful about the panels’ orientation: up-down, inside-outside, left-right. For every panel look very carefully for the proper orientation, where pre-drilled holes are, whether slats are lining up. Absolutely take the time to do so. Otherwise you’ll have to undo and redo a few steps (thankfully, you can undo-redo later, without having to take the whole thing apart again… — mounting the doors is the only challenging part. They tell you to attach 4 independent door panels to the hinges (and, as mentioned, the door panels are not a perfect fit). I think it’s nearly impossible to without doing the following. Attach the top door panel to the bottom door panel with the provided board. This way, you can make sure the 2 panels on each side are properly aligned. Then you mount the two doors (instead of 4) in the frame. Much easier to line them up. I didn’t want 4 doors, so that worked perfectly for me, but if you prefer 4 independent half-doors (2 on top, 2 at bottom), you can later remove the board that joins the 2 half-doors on each side. You’ll see, much much easier… — the door latch with possibility to add a lock are pretty flimsy. I recommend replacing them with a better latch from the store or Amazon. Some magnetic latches are provided (similar to kitchen cabinet) and these worked great for me. (I don’t need to lock the shed). That’s it. Give it a try. You won’t be disappointed. Very functional shed that looks good too!

Overall, I am very happy with the delivery, product, set up and install. The materials are lightweight but seem fairly good quality and are relatively stable once all put together and installed. Putting it together was like a piece of IKEA furniture, not very difficult. I have mine just sitting on top of a cement pad that I poured to make my space level. The shelving inside has multiple levels of adjustment so that I was able to fit my small electric lawnmower standing up. I am considering getting a second one as long as this holds up well over the next few months. I was a little hesitant spending this much on a shed like this, but for what you get and for how great it looks once put together I have no regrets paying for this great storage option.

I bought this to put on my front porch of my rancher home. It holds ALOT. It is a light gray - not super heavy duty but is exactly what I needed and looks great! It was a bear for a 63 year old to assemble- all by myself.

So I'm pretty good at IKEA type assembly and this was much like that. The instructions were good, not great. Getting the orientation of each panel correct is a challenge. Take your time. Do not tighten the screws until the end. You will definitely be unscrewing and redoing some things. The wood is soft so it's easy to screw things together. I still highly recommend a drill or power screwdriver. It took me 4-5 hours by myself to assemble. It was hot out so I took a number of breaks. The Good - Each screw packet came with an extra screw in case you drop one into the grass (never to be found again) - Panels are all marked with a letter code. - Predrilled holes are circled but you have to look closely to find them. - The frame is metal which makes the unit much sturdier. - The roof is made up of 2 panels and each panel is waterproof. Don't forget the clear plastic strip that goes on top over the gap between the 2 panels! The Bad - There are gaps in the side panel slats so this is not water proof. Although I have checked the insides after a few rainstorms and my interior did not get wet. - Doors were somewhat challenging. I assembled the top and bottom door panels before I hung them. A little shim at the bottom helped get them aligned. The screws did not line up with the predrilled holes but that wasn't really an issue. - The instructions had some wrong wording in a few sections but it was pretty obvious what the correct thing to do was. All in all I'm really happy with this shed.

It looks very nice, and I love the smell of the wood. The directions were a bit confusing, but no surprise there! It took us most of the day to put together. So far, we like it. I’m curious to see how it looks inside after this big rain storm that’s hitting us now. Review part 2 - downgrading to 3 stars. After the rain (and we have it under our eaves so it's partially covered), the doors warped a bit and will not stay closed with the magnets or the latches. I'm going to get some larger latches that will hopefully keep it closed better.

Pretty good shed for storage of items that can get wet. Build quality is pretty solid and took about 3 hours to build solo. Once assembled and in place it’s did not flex or move at all. The only we had, after a light rain the roof does leak since it is two pieces and even with the plastic insert it still leaks. For just leaving garden tools it’s fine but we ended up chalking the roof to keep the inside a little drier.

Overall it was layed out and went together Ok. When the doors were being installed the right side wouldn't align. After considerable trouble shooting I determined the shelves were too long causing the sides to bow out. The hinge pilot holes were wrong (only on the right doors). Those needed filled and re-drilled. I wouldn't reccomend this due to needing a shed quickly and I spent almost as much time as if had built it from scratch.