Nilight in-Channel Window Deflectors for Silverado/Sierra 2014-2018, 4PCS

Exact and snug fit on my 2024 Chevy Silverado 1500 RST Crew Cab. These window visors are way better than the ones I already have but for different vehicle models. I have several installed on my vehicles all outside mounted using double adhesive tapes. Over time, the adhesive tapes will eventually dry out especially here in AZ, and will soon begin peeling off either from the vehicle's door frame or with the visor itself. Plus the double-sided adhesive tape leaves a nasty hard-to-remove residue from the door frame. These NiLight window deflectors (select fitment) are better. 1. Easy to install inside the window rubber seals. Make sure to position the right visor first on whichever door you will be installing 2. Visor for each window/door is longer, it will fit snugly in the window glass rubber seal. It requires a little bit of bending (don't worry it won't break) to get the visor fully seated inside the rubber seals. Make sure the windows are all rolled down. I decided to leave and not use the double adhesive tape on the visors. Once a visor is fully seated inside the rubber seal channel, you can tell that it won't easily come off even when driving. Plus, if you decide to remove the visors it would be easier not to get those tapes sticking inside the rubber seal. 3. It comes with a dozen of metal clips. I used 1 each for the front visors and 2 each for the rear. Make sure to put the clips in an open rubber seal channel (gap) then push it gently using the plastic tool (crowbar) until you hear it snap into place. 4. If you are installing this same as my vehicle, make sure to put tape beside the side mirror door rubber molding/seal where the visor tip meets with the end of the window frame to prevent it from getting scratched or peeled off during the installation. Once the front visors are fully seated and aligned, you can remove the protective tape by peeling it off. 5. Final step - make sure to test windows operation by slowly closing then observe if the clips are in obstructing the glass from closing completely. My install did not have any issues except for the driver-side auto up/down at first the window bounced back when I rolled it up but after another test, it rolled up smoothly with no issue. It looks great on my truck. Like other reviews, the visor is a little shy of width. Overall, I am satisfied with my purchase of this product.

I installed these Nilight in-channel window deflectors on my 2020 Chevy Trax, and they fit like a glove. The package came with everything needed, including a simple kit that made the process fast and frustration-free. I didn’t even need to rely on the manual—anyone can install these with basic care and patience. Build Quality & Fit: The plastic has a good balance of flexibility and sturdiness. It was easy to bend slightly to align inside the window channel without cracking or stressing the material. Once in place, it stayed secure and didn’t interfere with rolling the windows up or down. Compared to my old set, these visors are slightly shorter, so they don’t block as much sunlight or allow quite as much airflow when cracked. That said, it’s not a deal-breaker and doesn’t impact basic function, so I didn’t deduct a star for that. Performance Highlights: Blocks rain from entering during ventilation Reduces wind noise when driving with windows slightly down Adds a sleek, OEM-like appearance No adhesive required—fits directly in the window channel Pros: Perfect fit for 2020 Chevy Trax Easy, tool-free installation Flexible yet durable material Clean, low-profile look Cons: Slightly shorter than some aftermarket visor options Manual is included but unnecessary for most Overall: If you own a Chevy Trax (especially a 2020 like mine), this is a great value. The install is quick, and the results are exactly what you'd want from a window visor—rain protection, airflow, and reduced wind noise. Highly recommended for a no-fuss upgrade.

I recently installed the Nilight in-channel guards on my 2015 Chevy Tahoe, and they’ve been great. The fit was perfect for my vehicle, and installation was straightforward with no modifications needed. They feel sturdy and provide solid protection against debris, rain, and wind while driving. I also like that they don’t interfere with window operation or affect the overall look of the Tahoe. Overall, they’re a high-quality, practical addition that enhances protection and keeps the interior cleaner.

On the vehicle less than 3 months and the one on the driver's door cracked and started binding up the window I had to take it off just to get the window to close properly. JUNK! . Not impressed.... Update that all failed.... Complete junk

Good instructions and the guards fit pretty well in the channels. Bendy. My only complaint is the tape along the upper rail, not the ends, it comes off too easy. The first piece installed the tape came completely off when i pulled the red protection off after install. The kit comes with extra tape so later piece I was able to replace. After that I removed all the covers before install. The clips were tricky, I ended up using a flat screwdriver to push them in.

I purchased these for my son's birthday. He loves them, especially now that he has a girlfriend who smokes in the car. All 4 windows in the car can be opened a little to let the smoke go out, even when it's raining. They are strong, went through many car washers, daily for over 2 months. He's thanked me over & over again. It's nice to still be able to make your son happy.

I have used this company for the rain guards on most of my family's vehicles in my opinion easy to install

Ok they look nice. But the fit is not the best. The tape is kinda junk. And u have to use metal clips to hold the up in. So I will see how this goes. Probably should of just got the weather techs and been done with it. But I like giving smaller companies a try and like to save little money too. Like I said they look nice. Fit is iffy and tape stinks. 50/50 at this point.

Fit exactly how it should, very nice product.

Installation was iffy. Front guards fit perfectly. Back ones, not so much. Back ones were loose, but good old double sided tape held them. Female installed. Very happy with them atm.

Installed waited the 48hrs then opens the windows and they pretty much all fell out….. Trash for the amount I payed

Excellent