VIPERADE Radio Holster MOLLE Radio Pouch Universal Walkie Talkie Pouch

I purchased one Viperade Adjustable Nylon Handheld Radio Pouch to see if it would securely hold and protect one of my BaoFeng BF-8FHP radios when mounted and carried on my B.O.B.'s MOLLE webbing ladder system. The 3800 mAh Li-ion Extended Battery will be the radio's primary power source, but I might occasionally need to use it with the shorter 2000 mAh Li-ion OEM Battery while the larger battery recharges from my solar charging system's power bank. With the larger 3800 mAh battery installed, the Viperade pouch fit my BF-8FHP like a glove. It was easy to adjust it to the correct width and depth with the Velcro panels on this pouch, and its height was perfect, allowing me to snug it up to my radio with its elastic cord fitting neatly inside both the On/Off Switch and the Nagoya 16.5" Whip Antenna I use without crowding or impacting them in any way. The radio's PTT button and the Mic/Earphone or Mike/Shoulder Speaker jacks were not blocked or covered at all by this pouch. If I need to change frequencies, I can quickly and easily release the buckle and webbing strap to which the elastic cord is attached and remove the radio from the pouch to access the radio's keyboard. When finished, I can easily slide the radio back into the pouch and push the buckle closed again, securing the radio without needing to re-adjust the elastic cord again. While the pouch's front panel covers my radio's speaker, it doesn't block or reduce the radio's sound appreciably. If using the radio with either the Mic/Earphone or the Mic/Shoulder Speaker, having the pouch's front panel covering the radio's speaker is a non-issue. The Viperade Adjustable Handheld Radio Pouch is made of very durable nylon, strong Velcro strips, and durable, strong elastic cord materials, and a high level of craftsmanship is evident from the accuracy of cutting the materials, sewing the panels together with straight stitches that are doubled in those locations receiving higher levels of stress or wear. The pouch can be mounted to standard MOLLE webbing ladders with two strong Velcro strips at the top and bottom of the pouch's back side. If wearing the pouch on a standard duty belt is preferred, it has a wide belt loop that will fit the widest and thickest duty belt you might find. Either the MOLLE or belt loop will hold this pouch very securely for you to access your radio quickly and easily. The only negative I found with the Viperade Adjustable Radio Pouch was if I was using the smaller OEM 2000 mAh Li-ion Battery in my BF-8FHP radio. The pouch would allow me to adjust its height to still hold my radio securely inside it. But all of the radio's operating controls, except the On/Off switch, and the Mic/Earphone or Mic/ Shoulder Speaker jacks were completely covered by the pouch's panels. I could carry my radio in the pouch securely, but I would have to remove the radio entirely from the pouch to use it, if the smaller OEM 2000 mAh Li-ion battery was installed. When I consider the manner in which I would be using my BF-8FHP radio during a disaster situation, natural or man-made, or in a SHTF event, that one negative isn't a deal-breaker, as far as I'm concerned, so I didn't deduct a star for it. All in all, I was impressed with the Viperade Nylon Adjustable Handheld Radio MOLLE-ladder or Duty Belt Carrying Pouch's functionality and ease of use, quality of materials and craftsmanship, and value delivered for its price, compared to other competitive products. I'm making this short addition to my review because I "McGyvered" a very simple, but effective, solution to the one negative I had for the Viperade Adjustable Radio Pouch, which was that it completely covered the operating buttons and the Mic / Earphone or Mic / Shoulder Speaker input jacks when the short OEM 2000 mAh Li-ion battery was used on the BF-8FHP handheld amateur radio. I measured the dimensions of the additional space taken up by the extension found on the 3800 mAh Li-ion battery, compared to the smaller OEM 2000 mAh Li-ion battery. I then cut a small block of firm closed cell polyethylene foam the size of the additional space taken up by the extended battery from some packing materials saved from previous shipments. Whenever I need to use the smaller OEM 2000 mAh Li-ion battery on my BF-8FHP radio when it is carried in the Viperade Radio Pouch, I simply slide the block of closed cell foam into the pouch and push it to the bottom, then slide the "short" BF-8FHP radio in on top of it and snap the elastic cord's buckle closed. Now all the radio's controls are out in the open and easy to use and I can insert and remove the Mic / Earphone or Mic / Shoulder Speaker into its jack with no problem. It looks just like I have the extended battery on my radio, instead of the smaller OEM battery. Problem solved, and the Viperade Adjustable MOLLE Radio Pouch easily earns the 5-star rating I originally gave it. If you were having the same problem, I hope you read this and can solve your problem as easily as I solved mine.

Perfect fit. The Velcro sticks tighter than a tic on a bloodhound so you can easily adjust for radio size but its not made for radios like the Baofeng uv-25 which is pretty big. The Olive drab looks pretty cool I have to say tho you may prefer another color if you think it looks too military like... Certainly appears durable and very versatile

I'm truly in awe in this holster. Its fully adjustable in that I could fit it with my Baofeng radio with the extended battery. It adjust via velcro and works very well. I was able to put it on my backpack strap and holds pretty well. The only issue is that if your backpack strap is thick it may be difficult as these straps are a little short and could have been a little longer. I will be putting on an extra piece of velcro as security, but otherwise highly recommend this holster!

Works great and will fit most moderate size radios.

I've been looking for something like this for a long time. I use a mirrorless camera that can record long videos to an SSD. I use a large power bank to keep the camera running for long periods and needed a convenient way to carry the power bank. Every other solution I tried was inadequate. The latest was a mobile phone clamp, which broke, allowing my expensive power bank to fall to the floor. Fortunately it wasn't damaged. This holder is economical (a priority for me), durable (excellent stitching), adjustable (to fit various sizes of power bank - velcro EVERYWHERE) (see, Photo 1), comfortable, secure - the power bank rides low in the holder so the center of gravity is low and and it doesn't move around, has a wide belt loop to prevent movement when I'm walking and - this is HUGE - the elastic straps that run across the top from the back to the buckle keep the USB-C cable secure so it doesn't disconnect (see Photo 2), which of course would stop the camera. Did I mention that it looks cool? If this holder isn't also advertised with photography equipment it should be. It's PERFECT!

Seems pretty well made, however it's HUGE, and in order to adjust it to fit my Baofeng BF-F8HP, I have to pull the velcro so far up that it has the scratchy teeth part exposed which then will catch on clothing and rake up ones skin. It doesn't impeded my using headset or anything and other than having it loose at the bottom and pulling the bungee tight I am just not sure this is the right holster. I love the quick release buckle and how you can snug it up but for the smaller radios it's just a NO.

Received in a timely manner they are very functional easy to use other sizes of radios we use defferent one for different locations so the guys have the carrier for the size they can adjust it to the size of radio they have for that day or longer the size is nice along with durability with the Velcro they work great so far we recently changed over to this system very durable for the jobs we do highly recommend this system

Pros: Extremely well built, almost infinitely adjustable for any radio. Cons (barely): If you have a Baofeng Uv-6K or similar radio, and want to use the separate speaker mike, the plug cover on some radioa opens downward and can interfere with how far the radio can slide into the pouch. Nevertheless, it goes 95% of the way. My experience is that I carry a sidearm on one side, and the radio and a phone (both in pouches) on the other side, all attached to a heavy-duty belt. It works much better to have the radio pouch in front of the phone pouch for ease of removal in the event of a call, although the speaker mike has minimized that issue. Also, the radio in the pouch is much "thicker" than the phone, so sitting in a chair or a vehicle seat becomes an issue if the radio is set too far back. Setting it up, as with all good things, may take a little trial-and-error, but once you get it the way you want it it you will be very pleased with this unit. Would definitely recommend and absolutely would buy again.

Ottimo prodotto, eccellente manifattura, lo spessore interno è regolabile ed anche l'altezza. Il gancio della cintura solido.

Conforme à la description, utilisé pour un gps garmin S64. Acheté pour pouvoir le fixer à la bretelle de mon sac de rando. Je vais le tester cette année en montagne

Este pouch es el único en el que cupo mi ulefone armor sin ser tamaño monstruoso.

Perfekt für den Service Techniker im Offshore Bereich. Die Tasche kann man super an seinem Gurt (PSAgA) befestigen. Sie sitzt fest in der Tasche und kann nicht heraus fallen. Je nach Position am Gurt kann man sie leicht bedienen. Die Schwimmweste über den Gurt beim Überstieg zur Anlage stört nicht und beeinträchtigt nicht die Benutzung des Funkgerät. Kann ich für alle Service Techniker die Offshore mit Tetra Funkgeräte arbeiten nur empfehlen. Vielen Dank Volle fünf Sterne.

Perfecto, para mi Jucjet UV-5RH va perfecto