Accusize Industtial Tools 3/4" Weldon Shank to 3/4" Nitto One Touch Shank Adapter, 0519-8000

Order the product very fast shipping and good brought up top quality

When I purchased my Vevor mag drill I could not figure out why my annular cutters would not work. Then I discovered there are multiple shanks. My drill has a nitto shank and my cutters have a weldon shank. A little more research led me to the Accusize Industrial Tools adapter. Ordered it late on a Friday and received it the following Monday around noon. Amazon and Accusize are amazing. Thanks

Heavy-duty construction, sharp dimensions, no wobbling connection, and excellent finish.

I was extremely happy with the timely delivery as it arrived over a week early from what I was expecting. The quick change fits well into my mag drill and the 3/4 Weldon fits annular cutters well. The only puzzling part for me is the bore for the pilot pin is too small for the head of the pin to pass up into the mag drill. If I use a 1” long cutter with a pilot pin for a 2” cutter it works fine as the pilot pin goes above the adapter. But once I try to use a 2” long cutter I no longer have a pilot pin. If you put the pin in the cutter like usual it doesn’t have the vertical space to retract into the adapter as the hole is cut due to the bore of the adapter being to small for the head of the pin. Thinking my only option is to drill out the bore of the adapter or run without a pilot pin for 2” long cutters.

it is as advertised

I bought the 1800W Vevor Mag Drill. It came with a bunch of metric-sized annular cutters. Mag drill is great. Included cutters are great. Problem comes when you buy other, normal, 3/4" Weldon shank bits as commonly used in most mag drills.I didn't know this before, but the Nitto One Touch shank is a standard in Asian and European countries. Mag drills apparently all have this shank over there. But I'm in the USA and we use the 3/4" Weldon shank standard. The 14-piece SAE annular cutter set I bought uses the standard Weldon shank which does not fit into the mag drill.The fix is this handy adaptor. It's a simple piece but does a very specific job. I've used this adapter with a 1-7/8" annular cutter going through 1/2" plate steel and it worked great. This little thing gets a lot of use and it just works well. Highly recommended.

Does its job, and does it well. A refreshing change for amazon products.

Do the job ,very happy!

Does what I wanted it to do.

The media could not be loaded. Ordered 1, came late! Had to postpone a customers job! Got it and went to the jobsite an hour away from home only to find the pilot pin hole is off. The hole is drilled through the adaptor on a slight angle and will not allow the annular bits (tried many!) to be inserted into the adaptor with the pilot pin installed!Took pics to show the customer the job would have to wait until I could get a replacement adaptor.Ordered a second adaptor (this one I'm reviewing now), it came late! Tested it before I drove an hour to the jobsite this time!It to is a defective adaptor!While trying many different pilot pins and 23 different brand new annular cutters, not 1 cutter would fit into the adaptor due to its pilot bit hole being crooked through the center also!I've now lost the job due to the customer can no longer wait for it to be done!I'll be sending both defective adaptors back!I will not try a 3rd time!I've found a new manufacturer/supplier and have already ordered one from them!Refer to video of me showing the multiple annular bits with 3 different pilot pins to prove it's not a bent pin or off spec annular bit!