Aquaseal NEO Neoprene Contact Cement for Wetsuit, Wader, and Watersports Gear Repair – Fast-Drying, Waterproof, Flexible Adhesive

Very good. Much easier to work with than the old thicker Aquaseal cement. In fact, it’s a bit runny so care is required. Very strong bond. Highly recommended.

Great for sealing wetsuit tears on a budget. And maintain durability of any wetsuit.

I can't believe how well this stuff works. I have a TYR Class 1 Hurricane wetsuit for swimming and have really struggled with tearing getting it on it is extremely fragile. I'm used to wet suits for skiing and this thing is not at all the same. Anyways I have gotten three finger width tears and have experimented a little to find the best process. Here are my tips 1. Have the bottle upright when you open it and be ready for some air bubbles it wasn't bad with my tube but the stuff is pretty thin, have something ready to sit the tube on that you can throw away 2. Fold the suit over at the tear and use a chip clip to keep it folded this will keep the tear as open as possible so you can get good coverage with the glue 3. Use a toothpick to spread dont mess around with a q tip, you need to get all the way down into the base of the tear. Put a small drop inside the tear with the tube then pull the tube away being careful not to get strings or drops on the suit and spread the drop around the tear with the toothpick making sure you get good coverage and dont get any on the skin of the suit, it wont do anything here but look messy. You dont need alot just enough to coat the tear 5. Wait the 5 minutes then repeat another application and wait 10 minutes. 6. Remove the chip clip flatten it out and give it a good press. 7. There is no need to seal the repair or anything like that its just going to look messy and it isnt doing a thing if you follow these steps you will have a strong repair that you will struggle to find.

Not what I was expecting, but it is effective. I expecting a rubber cement type adhesive, but it’s more like gasket making material or “spray and seal” material. Be careful removing the cap because it wasn’t asking permission to get out of the tube when I first opened it. A black slimy evil looking ooze came out in a hurry like it was here to finish off Ferngully. I just hope it ain’t as bad as it looks because it definitely ended up all over the place

Good product and Fast Delivery

I had a good-sized tear on the leg seam of my wetsuit, & wanted to stop it before it got any bigger. I watched a couple of YouTube videos to get a sense of the proper way to use neoprene glue, grabbed some dental floss and dove in (so to speak)! It was tough to sew the dental floss into the seam, as the sides were pretty frayed; but once I got the seam mostly closed, I hit it with a couple of layers of this glue on both sides, and that really closed everything up nicely! The glue takes about 10 minutes or more to get tacky, at which point it can be manipulated, and before that it is kind of messy to handle, so use a popsicle stick or something similar for spreading. The glue really soaks into the neoprene, and once it dries it is very elastic and stretches with the neoprene…awesome! I haven’t tried to glue/patch a hole with this yet, that will be the next challenge…but this is definitely the glue to use if you need to do a wetsuit/neoprene suit repair. 2 thumbs up! 🤙🏼🤙🏼

Stuff works great , i popped a hole in my wader sock and , no leaks after 7 day trips.

This should really have a finer nozzle tip. It's really, really hard to get a small amount for a fingernail hole. While I have lots of extra product on my wetsuit and it looks like poo, the repaired spot has held up decently well in the water.

This adhesive is great for fixing waders. The fix has been rock solid.

Best seller product

Easy to use and works well to repair rips

Works well! It repairs my wetsuit tear!!

Great for wetsuit repair, dries quickly. Black color blends with color of the suit. Very liquid though so just prepare and don't spill when used.