BONTEC Single Arm Monitor Desk Mount for 13-32 inch Screen, Tilt, Swivel, Rotation, Ergonomic Gas Spring Monitor Stand with Cable Management, VESA 75/100mm

These arm are incredible, strong and sturdy yet can move with one finger aswell. Have both of mine clipped on now and they were very easy to install, love the cable tidy built within the arm aswell.

Purchased for my son’s desk for his gaming monitor. I like the versatility of this pole as the screen can be moved to multiple heights/angles very easily. Pole also takes up very little space on the desk. Items is very sturdy and seems good quality

I've been using the BONTEC Single Arm Monitor Desk Mount for my 27-inch monitor, and overall, it's a solid product with a few minor drawbacks. Pros: 1. **Build Quality**: The arm feels sturdy and well-made, especially considering its price point. The zinc material and robust U-shaped joint head structure provide reliable support for my monitor, and I can confidently say it holds my monitor without any wobbling. 2. **Wide Range of Motion**: This monitor arm offers a great degree of flexibility. It tilts, swivels, and rotates smoothly, allowing for easy adjustment whether I want my monitor in landscape or portrait mode. The gas spring arm makes height adjustments effortless, though it's important to remember that the spring only works once the monitor is mounted. 3. **Space-Saving Design**: The C-clamp and grommet mounting options are a nice touch, offering flexibility depending on your desk setup. The cable management system is helpful too, keeping the clutter under control. 4. **Good Value for Money**: Given the price, especially with discounts, this is a budget-friendly option that doesn't compromise too much on quality. Cons: 1. **Gas Spring Sensitivity**: One thing I noticed is that the gas spring mechanism is quite sensitive to the monitor's weight. If your monitor is on the lighter end (closer to 3kg), it might take some fine-tuning to get it to hold position well. Heavier monitors in the 6-9kg range seem to work better with the gas spring. 2. **Installation Complexity**: While the product offers two mounting options, the installation process wasn't as smooth as I hoped. The instructions could be clearer, and it took a bit of trial and error to get it mounted securely. Also, you need to make sure you have the right desk thickness to match the clamp sizes. 3. **Adjustment Resistance**: While the movement range is impressive, the arm can feel a bit stiff, especially when adjusting the swivel and tilt. I expected smoother transitions, but once it's in place, it does hold well. 4. **Limited Tilt Range**: The tilt range is 90 degrees, which is decent but could be slightly more for those who want extra flexibility. This might not be a big deal for most users, though. ### Final Thoughts: The BONTEC Single Arm Monitor Desk Mount is a reliable, affordable option for anyone looking to free up desk space and improve ergonomics. It works best with heavier monitors, and once you get past the initial setup, it's easy to use and adjust. However, if you're after a mount with ultra-smooth movements and easy setup, you may want to consider higher-end alternatives. For the price, though, it does a fantastic job!

Got this to mount an ultrawide monitor too. It was really easy to install, feels very sturdy and looks good making it great value for money. Haven't had any issues that you get with some others with the weight of the screen making them tilt foward. It just holds everything nice and straight and occasionally when I want to rotate the monitor, it moves easily. The cable management in the arms works really well too.

Very sturdy, expected a weaker and lower quality product for the price. Works brilliantly. very happy.

Not too difficult to install and once you have the tension dialed in they're great just expect some trail and error! Good quality, never had issues with feeling flimsy or unstable. Just if you have issue like me where you desk isn't compatible because of the way they're built you may find it useful to buy rubber support blocks used in car repair for I think a scissor lift. (If you're confused this probably doesn't apply to your desk)

I don't normally write reviews - especially for "cheap" things. I never expect too much from things that are obviously mass-manufactured for the lowest cost possible. All I ask is that they perform the bare minimum they advertise for a few years. This arm fails to do that. I bought this arm as I just got a new 32-inch monitor that my current "cheap" £30 arm that I've had for a few years is just not quite strong enough to hold the monitor up fully. The weight limit on the old arm is 6.5KG - the monitor is 6KG - it says it's also only rated up to 27-inch monitors. This Bonatec arm claims to support up to 9KG/34-inches. I only tried the arm for an hour while I was trying to get it to work out - and in that time, the gas-spring arm at least did seem to easily hold the arm up to whatever height I wanted. It totally fell apart though with the tilt adjustment. It's the same type of adjustment that all these cheaper monitor arms have - you basically tighten it with a nut until it holds in position. No matter how much I wrenched on the nut, the monitor would always tilt forward. I nearly broke my hands trying to tighten it as much as possible (and then when disassembling it to send back). Even if I could have gotten the nut tight enough so that the monitor didn't start tilting forward, I wouldn't have been able to adjust the tilt at all, the nut was that tight. I don't *expect* much in the way of tilt adjustment from a mechanism like this - but considering my original arm that is outside the spec, holds the angle of tilt I set it at and I can even adjust the tilt with relative ease - this Bonatec is just sub-standard. I think if you had a much lighter/smaller monitor then it would work - but if all units are like this, it's false advertising to say it supports big heavy monitors.

Easy to install, mount the monitor, attach the arm, and swivel your screen to your preferred position. Both the stand and its arm are reliably sturdy and no wobbling, or reduction of the gas spring's strength has been seen so far. I would definitely recommend it to anyone who is looking to buy a valuable monitor arm. I also use a 27 inch monitor and haven't observed any issues with it yet. I'm sure it is going to be fine in the long run as well. Another benefit of these monitor arms is that they don't use a separate hoop to get attached to the base rod and they won't slip as a result of friction in long-term usage of the bracket.

Sprawdza się bez zarzutu , siłownik daje radę , nie zjeżdża , nie przechyla się . Często przestawiam monitor . Siłowni daje radę . Polecam monitor 34 cale zagięty .

Eccellente braccio per montare monitor su scrivanie, etc. Molto stabile, lo uso con monitor da 34’ 21:9 abbastanza pensate e devo dire che non fa una piega. Montaggio abbastanza semplice basta seguire le istruzioni. Ottima resa ed ottima calibrazione per altezza, inclinazione ed oscillamento. Consiglio vivamente a questo prezzo

Stabilität & Halt Die BONTEC Monitorhalterung ist extrem stabil. Der Monitor sitzt bombenfest, nichts wackelt oder sackt ab. Auch nach häufigem Verstellen bleibt alles genau da, wo es soll. Beweglichkeit & Ergonomie Neigen, Schwenken und Höhenverstellung funktionieren leichtgängig und präzise. Der Monitor lässt sich perfekt auf die Sitzposition einstellen, was den Komfort im Alltag deutlich verbessert. Montage & Kompatibilität Die Montage war unkompliziert und schnell erledigt. Die Halterung passt problemlos für Monitore von 13 bis 32 Zoll und deckt die gängigen VESA-Standards ab. Verarbeitung & Qualität Sehr hochwertige Verarbeitung, massives Metall und saubere Mechanik. Macht einen langlebigen Eindruck und fühlt sich deutlich wertiger an als viele günstige Alternativen. Fazit Eine extrem stabile, flexible und hochwertige Monitorhalterung. Für den Preis wirklich top und ein echtes Upgrade für jeden Schreibtisch. 5 Sterne – richtig geiles Teil.

Super produit j’ai acheté deux facile à installer

​⭐️⭐️⭐️⭐️⭐️ ¡Imprescindible para tu Setup de trabajo! Calidad Premium a un precio inmejorable (Perfecto para Monitores Curvos de 34") ​Compré este soporte de monitor BONTEC con resorte de gas buscando una solución ergonómica que me permitiera liberar espacio en mi escritorio y ajustar mi pantalla Curva Ultra Ancha de 34 pulgadas con facilidad. ¡Y vaya que ha superado mis expectativas! ​👍 Lo que más me ha gustado: ​✅ ¡Soporta monitores ultra anchos Curvos sin problema! ​Este era mi mayor temor, pero el soporte BONTEC maneja mi monitor curvo de 34" con una estabilidad impecable. Pude colocarlo perfectamente centrado y el brazo no muestra ningún signo de fatiga o inestabilidad. Es un rendimiento excelente para pantallas de este tamaño, siempre y cuando el peso no exceda los 9 kg. ​💨 Resorte de Gas Excepcional: El corazón de este producto es su brazo de resorte de gas. Permite ajustar la altura, profundidad, inclinación y giro del monitor con un solo dedo, de forma suave y sin esfuerzo. Una vez que encuentras la posición perfecta, el monitor se queda justo donde lo dejas. ​🔧 Instalación Sencilla y Robusta: El montaje fue increíblemente rápido, no más de 15 minutos. El soporte se siente extremadamente sólido y seguro una vez anclado al escritorio, crucial para un monitor grande y costoso. ​📐 Versatilidad Completa: A pesar del tamaño de la pantalla, los ajustes de Inclinación, Giro y Rotación funcionan bien. La flexibilidad es clave para trabajar cómodamente. ​💪 Soporte de Peso Fiable: Mi monitor de 34" (asegúrate de que el peso de tu modelo específico esté dentro del límite de 9 kg) se siente perfectamente seguro. ​✍️ Conclusión: ​Si eres usuario de un monitor curvo o ultra ancho y buscas un soporte de alta calidad, robusto y con la comodidad de un resorte de gas, el BONTEC es una opción fantástica. Es una inversión que mejora drásticamente la comodidad y la productividad, incluso con pantallas de 34 pulgadas. ¡Altamente recomendado!