v6 - Unique Safer Bike Bell - Ring while braking and turning while in full control. Powerful brass bell fits all bikes. Made in the UK

It's a brilliant, simple design; allowing you to ring a it while steering, breaking and changing gears (I've crashed into people before when they step out while I am going quickly so I need two hands on breaks and therefore can't ring my bell, so this is really handy). Can be fitted to any bike in any place (much more versatile than any other bell I've had). The sound is loud and clear and cuts through the noise of traffic well. Only downside is the installation can take a while, and with no instructions it seems like there should be a shorter way, but you'll just have to sit there unscrewing and screwing a screw for a while in an awkward position.

I've used a few different models of bell over the years and bought this to replace a Knog Oi Classic on my mountain bike. The Knog Oi (apart from being too quiet) is a flimsy design, becoming irreparably damaged after I turned the bike upside down to mend a puncture in the dark. First impressions of the The Trigger Bell - fantastic! Ergonomically, it's brilliant - although it took me a few goes to find the perfect location in amongst the trigger shifter, brake lever and dropper post remote. Worth persevering. For such a discrete unit, the bell is very loud. It is also solidly made. On its first outing I took it on an 80km, 4 hour ride off-road and it didn't rattle or "ding" once unless I made it do so. Only negative point... the sound became slightly muted in the rain, but I image most other bells would have the same issue. Just give it a wipe. Apart from that, this bell is pretty much perfect as far as I'm concerned. Just what I was looking for. I'll order some more for my other bikes.

What do I mean by everything apart from the sound is 5 stars. Let me explain, installation is the simplest you get with an very secure fitting, quality is good and packaging was good. The feel of the leaver was great, but due to its shape and size it just didnt produce a loud or distinct bell sound. It certainly pinged but most didnt recognise the sound and if someone is wearing earphones there was no chance of them moving. It's very interesting and certainly if you need full control or arnt confident to remove your hands then this is for you. I bought it on the basis I didnt have the space for classic (without getting a bar extender) so this was great but it didnt do the job I needed so It had to get passed on. Loved the idea and design but the sound is too pingey and tinny but that comes with the compact size so I cant mark it down heavily as that's part of the design.

I have had 3 Triggerbells in the last 3 years and I can safely say that the latest iteration is a vast improvement over the others. The first Triggerbell I had fell off but Steffan at Triggerbell despatched a free replacement on the spot - fantastic customer service. The second unit I decided to replace as I found that the hammer was too stiff to use when wearing gloves. The third new unit has now added a spring to the hammer mechanism which allows the bell to be struck with less effort, and also has the side effect of allowing a louder ring to be made; this means that I can give other users of the Taff Trail much more notice that I am approaching. I can't think of a better bell for the money. It is ergonomically excellent, rings true, and is backed by a company with excellent customer service. Brilliant! Get one!

This should be your bell of choice; your first choice. If you’re a serious ride you’ll appreciate this design. I was dubious about this. But when I turned up and I installed it I was pleased. It’s not some big chunky thing that you have to stop and engage with. It complements your journey it doesn’t stall it. It keeps the momentum and ride going. It’s got a nice ding to it; not a scare everybody ding but I’m here. We had some problems initially. My gosh, best customer service ever. Responsive and engaging. No BS from this seller. He wants you to be happy with the end product. It’s small and doesn’t get in the way. My little Girl and one too. If she was to come off or drop her bike this wouldn’t be located anywhere that it could break. It’s got a nice finish to it. It’s small and lightweight. The trigger and where you can locate it is the best part of this. Nicely made. Good mount and construct. I also have a specialised bell which I’ve given to my child now; it is louder but it’s also bigger and requires a stronger trigger pull. I want people to move out of the way in plenty of time. Not those that go left and right and left again and panic. I want them to have plenty of time to know I’m coming and there. I have to test this out a bit more in this respect but I’m happy so far. Will let you know how I get on.

I purchased this in order to fit it on to the flat bars of my MTB. It fits via a cable tie like mechanism and although it can apparently be fitted on both the left and right hand side of the bars, if you want to use your thumb, it goes on the left. The issue with the bell on flat bars is that it will eventually rotate, which it did to me, and actually prevented me from applying the brake! I tried using tape on the bars, but it still rotated. Ideally, they need to look at the mountain mechanism of this in order to ensure that it clamps against flat bars adequately, and safely! (see above re it preventing me from being able to apply the brake!). On a positive note, it seems that the majority of people can hear it and are alerted to your presence.

Love this bell. Easy to fit. Placed near brakes so can brake and bell at same time. No need to choose between both when a random pedestrian comes out! I was a bit intimidated by the instructions given different gear types. But in the end was really easy. It comes on a cable tie which you put over your handle bar. You then tighten it and cut the small bit off. You just need to know if bell faces up (on right) or down (on left) depending where your gears are. In the end was easy and highly recommended for a great price!

Un po’ scettico alla fine l’ho acquistato pensando fosse quello che cercavo ed effettivamente è perfetto per essere montato sotto e non sopra al manubrio. Montanto sopra è un po’ alto e sicuramente antiestetico ma sotto non si vede e sta benissimo tra manopola e cambio, e soprattutto è perfettamente azionabile con il pollice senza spostare l’impugnatura della mano sul manubrio che in discesa è fondamentale. Parlo di montaggio su mtb e non bici da corsa. Dopo un paio di mesi di utilizzo anche in condizioni di fango e bagnato funziona perfettamente quindi direi che è anche resistente e il suono è perfettamente udibile dai pedoni.

I have several bikes and have installed the small (approx. 1 inch diameter) bells that you can readily find packaged as a set of 2 for under $10 or so. I love the tone of those bells. They are reasonably durable, have loud but pleasant double ding tones, and are small enough to position for use on either side of all my flat bar bikes; however, they don't fit the larger diameter drop bars on my road/gravel bike. This one does! It was super easy to install snuggly and inconspicuously on the left side hood of my bike's drop bars (I'm not sure if it will install/work on the right hood of drop bars). It has a very pleasant single ding tone that is clear and loud enough to be heard from a good distance even on a busy greenway. If you're tired of calling out "ON YOUR LEFT", you'll love this and I suspect many of the people you pass on the trail will too. You can tell the people who designed this bell actually ride drop bar bikes. While it may be a bit more expensive than my trusty, tried-n-true double-dingers, i'm pleased to say (after 1000 miles of use) I can't imagine finding another bell this close to PERFECT for a drop bar bike at such a reasonable price.

取付けスペースもあまりとらず、高い音色が響きます 良い商品だと思います

Snabb leverans och allt enligt förväntan. Kan vara den bästa ringklockan till bockstyre

- Mounting & Positioning – Sits near the brake hoods, so I can ring it without moving my hands. Super convenient. - Ease of Use – Quick thumb flick, smooth trigger. Loud enough for most situations, but not the loudest. - Look & Build – Low-profile, doesn’t mess with the bike’s aesthetics. - Final Verdict – Well-designed bell for drop bars, made in the UK with a 5-year warranty. Easy to use and perfectly placed, but could be a bit louder. 4.8 out of 5!