G-Rack Garage Shelving Unit: 180cm x 90cm x 45cm | Single bay, Galvanised 5 Tier Unit | 175kg Load Weight Per Tier (875kg Per Unit) | Home, Office, Garage or Business Use | 5 Year Warranty

I bought these a day ago, amazed to see they could come next day vs so many other brands. I needed 3 of these to fill part of my garage wall and something that could hold boxes with some weight. This fit the spec. I’ll briefly run through a few things but long story short……I would recommend these. If you find this review helpful, please mark it as so, thank you in advance :-)Delivery speed - next day so very impressed.Packaging - perfect, no issues, well packaged and all items came with no damage (I may have scratched them a little on my floor when unboxing).Setup - very easy. There’s 12 steps. Once I built one, I could do the others with no instructions. You need a rubber mallet to put together, nothing else. It took me about 25-30mins to assemble per shelf and I’m no diy expert.Build quality - overall very good. At first you think everything is flimsy when it’s not assembled. As you start to build it, you realise it’s strong. Once built and shelving added, it’s very rigid. I’ve seen some comments about mdf rotting when damp. Tbh, that’s a given with this type of mdf. Fortunately where I’ve put this shelving, it shouldn’t get damp but to be sure I bought some primer and spray paint so I will do that at a later point just to be sure e.g. place some wet items on it.Weight capacity - I’ve added 30kg boxes onto the shelves and no strain seen. There’s a centre piece of metal that I’ve shown in pics that gives extra support. I have no concerns with loading these shelves.Storage - the dimensions are given in the ad. For me, they’re spot on and I’ve managed to tidy a huge amount with the number of shelves provided. Be try pleased.Value - it’s been a long time since I’ve bought something and been shocked at how good a value this is. When buying 3 of these, it was so cheap compared to many other places. I’m truly shocked and very pleased at the same time. One of the reasons I came across these was next day delivery otherwise I wouldn’t have entertained the thought given so cheap but after reading reviews, and receiving, very pleased.Any drawbacks - painting the mdf, a shame they didn’t come sealed but at this price, no concern. I can’t think of anything else.I would absolutely recommend. Please mark as helpful if you found it so. Thank you :-)

The 3 units arrived 2 days after the order by very helpful Parcel Force. G-Rack sent me a friendly email to say get in touch if I have any questions/problems, which was reassuring.An experienced handyman friend put them up. He was very impressed with them - ease of build, good finish, nothing missing, everything fits well, sturdiness- and good, clear instructions. He had all 3 units up and placed in just over an hour!I'm very impressed. I now have a great double width, half height, 40cm depth bench which would be fine for doing minor DIY projects, and two full size upright units bolted together. They look and are fit for purpose, they're very sturdy and hold lots of the stuff that gets relegated to the garage. A good tip from my friend is don't put the lowest shelf on the lowest slots - put it up 2 or 3 notches so that it's not so close to the cold, damp vapour coming off the garage floor.In sum, a great garage storage solution, at a good price, with great service.

Pretty good overall, and intuitive to put up but has good instructions just to make sure. Each 900mm shelf unit is packaged separately and it made moving the 3 around quite straightforward. Quick delivery, several SMS to refine when, though not accurate as it turned out.You will need a rubber mallet (does not come with one) though using a standard hammer is a paint chipping option. I found a small screw driver essential also as one or two attachment points were tight, but had no other issues. The screw driver also helped fit the central shelf support bar in securely (have to bend the tip manually; easy enough without superstrength). One or two clips went in the wrong side of the bracket (hard to avoid)but this is more esthetic, as they have the same level and strength of seating.There are 2 joiner pieces with each of the 3 units so you can clip your 3 shelf units together needing only about 10mm spacing. There are no round fixing holes on the shelf brackets though, so if you want to fix to a wall you'll need to be imaginative. They sit very solidly (45cm width) on small rubber feet and wall fixing seems unnecessary.The shelves are 6mm MDF unfinished and have a central support bar to make pretty robust and the weight limit seems reasonable. Cliping them in at the end was easy (even the top one around the top rubber cap, only needed a slight fiddle.I'm happy and if I extend a shed will be looking for the same again

Fantastic bit of kit and a brilliant price. Really pleased I read so many reviews on so many different units, which led me to this one.There were a few things I was concerned about when reading reviews -1) missing pieces - no worries here, everything was included2) bent pieces - everything was in perfect condition (including boxes on arrival)3) shelves going mouldy - to be determined after a while in use, so cannot comment yetI would say the instructions aren’t worth reading, as I think it makes it harder to build them following these. I built mine one Shelf level at a time:1) connect four bottom corner posts - Insert bottom shelf (this way you have a littlemore give on each corner to get the shelf in)2) connect next shelf level brackets And insert shelf and so on until you reach the top.The teeth fitted really well for my units and I didn’t have any issues lining them up. Just tapped some in with mallet, others I had to use something to protect the metal, so I could hit it a bit harder without bending the edge. Worked perfectly.Can’t recommend these enough and will definitely by more when we come to kitting our our garage.

This shelving unit is first class for a garage or shed, strong, stable and attractive looking, it is not difficult to assemble. It is well worth following the manufacturer's advice and taking the time to seal the hardboard shelves with some form of varnish or sealant before assembling.