
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Senegal.
โก Fix it once, fix it right โ OEM power for your dryerโs comeback!
The Whirlpool 4392065RC Maintenance Kit is a genuine OEM replacement set designed for 29-inch dryers built from 1965 onward. It includes all essential partsโdryer belt, drum support rollers, idler pulley, roller tri-rings, and clipโto repair noisy, worn components and restore smooth, quiet operation. Easy to install with basic tools, this kit extends your dryer's lifespan and ensures reliable performance without the risk of aftermarket parts.




| ASIN | B002DUCEMM |
| Batteries Included? | No |
| Batteries Required? | No |
| Best Sellers Rank | #9,558 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #67 in Dryer Replacement Parts |
| Brand Name | Whirlpool |
| Color | Other |
| Customer Reviews | 4.6 4.6 out of 5 stars (1,966) |
| Date First Available | July 9, 2009 |
| Included Components | Package contains (1) Dryer Repair Kit |
| Is Discontinued By Manufacturer | No |
| Item Weight | 14.4 ounces |
| Item model number | 4392065RC |
| Model Info | 4392065RC |
| Part Number | 4392065 |
| Product Dimensions | 8.75 x 8 x 1 inches |
M**N
OEM roller replacement
Worked like OEM. Tried some cheaper Amazon rollers first and they were quite loud, these were so much better quality and quiet.
J**Y
PERFECT OEM QUALITY!!
SKIP aftermarket parts, definitely go with OEM. Our drier burned out the thermal fuse, and because that generally only happens if there is an underlying problem I decided to investigate. After confirming the fuse was bad I removed the front panel and drum of our drier to find one of the drum rollers chewed up pretty badly and wasnโt spinning freely. I bought this kit with new belt, tensioner, both rollers and hardware. I did completely clean both roller shafts well and added a dab of grease to the bushing on both. These rollers are not equipped with bearings, so greasing them lightly seemed logical. Took about 20 minutes to remove all old parts and install new ones, another ten minutes to reassemble the cabinet. Replaced the thermal fuse and drier fired right up and ran smoother and quieter than it has in years. After reading reviews of the many aftermarket parts Iโd found there was no way I was skimping on price for an appliance that uses 220V and creates high heat- super risky. Plus I didnโt want to do this repair again in short order. So I didnโt mind spending the extra money for OEM Maytag parts, plus the fact it was a repair kit was outstanding. If youโre embarking on this repair, youโre already very deep into your drier. This is a perfect time to remove all lint, and thoroughly clean and inspect the entire unit. I checked all of the following- high and low heat cutoff switches, removed the entire exhaust box and inspected the fan and cleaned all the plumbing. Inspect your vent hose and clamps, all fasteners, and electrical connections. Our drier is 11 years old, and this is the first repair we had. We removed about $7.00 worth of loose change, various pieces of misc. hardware (not drier related), a couple buttons, a whole bunch of rogue lint, and other dirt. Most of this is extremely hazardous around heat and moving parts. All in I would definitely buy these parts again (just hoping I donโt have to), itโs so much easier and more cost effective to repair than replace an entire unit. I learned that every couple years I will be removing my front drier panel to thoroughly clean and maintain the moving parts. Iโd say this is a super easy DIY repair with basic tools, and while the kit came with instructions there are plenty of videos online as well.
S**N
Great OEM Replacement
The wheels are on upgrade. Worked and fit perfect. Easy to install. Just those triangular clips are somewhat annoying.
S**T
Perfect.
Perfect fit, exactly what I needed. Worked great.
P**B
Good OEM parts/ Had a strange issue with idler pulley though
I guess I should start by saying I use my washer and dryer a lot. Two to three loads a day since I purchased it in 2013. As cheap as these rollers and idler pulley are I guess they have held up pretty well. This is the first issue I've had with my Whirlpool Cabrio Model WED5800BW0. It started making a squeaking noise that sounded like a lot of the videos you find on Youtube. I ordered the kit and took it a part. I replaced all four rollers but after struggling with reinstalling the inner tri rings. I just cut the outer ones off and left the inner ones in place; pretty sure these will outlast the new rollers. Everything was very straight forward until I got to the idler pulley. It was frozen on the shaft and the belt had just been sliding through it. I removed the spring and unbolted it from the motor bracket. I was unable to remove the pulley or even turn it at all by hand. It had seized to the shaft. Fortunately, I have a pulley puller that I use to pull press fit bearing off a shaft so this was very easy to remove with this tool. If you run into this same problem yourself and don't have a pulley puller, most auto parts stores will loan you one under their free tool rental program. Hopefully my issue is not very common. Of course you could also order the entire idler pulley and arm with the bearing preinstalled for a few more dollars if you want to be absolutely certain you can fix it all in one outing and don't have a pulley puller. If I didn't have a pulley puller I would have used a hack saw and carefully cut though the plastic then the bearing trying not to damage the shaft too bad. That would have been a pain though. Like I said, I suspect this is not very common. This is also a really good time to clean all the lint out of your dryer and the vent reducing the chance of a fire. Lint does build up as you can see from my pictures.
C**N
On my second kit..... first one lasted 7 years :)
I overhauled my dryer with the exact same kit 7 years ago, and it kept the dryer quiet and smooth for that entire time. A couple of weeks ago I started hearing the familiar sound of the dryer starting to make a squeak again, so it sounds like it's time to do the deed of replacing the bearings again. If I recall, it took me about 1-2 hours from start to finish, but was well worth the work. It's a simple job if you're up for the task. I didn't add lubrication to the bearings last time, but I probably will this time just for extra insurance. While you've got it apart, it's usually a good time to replace the heating element as well as vacuum and clean the inside of the dryer itself.
T**D
Quality OEM kit with quiet rollers. Much better than the off-brand knockoffs.
If this is the kit your dryer calls for, don't even think about saving a few bucks on a non-OEM kit. The belt on our Kenmore dryer lasted 15 years before it broke. I followed some advice and bought the full kit to replace the rollers and the belt. I thought I'd save money on an off-brand kit. The rollers were extremely noisy and the belt lasted less than 3 years! I installed this kit and it's all quiet like when it was new. If you're not afraid of basic appliance maintenance, it's a fairly easy install especially after watching a few Youtube videos.
L**N
Super Easy and Great Quality
Great product. All components as described. I think it was harder disconnecting the drier and moving it out of the laundry room and back in than it was installing the new components. I will tell you thisโฆ WEAR GLOVES from the moment you start disassembling the drier until all the panels are reinstalled. The edges are SHARP and they will get you quick. Came with great instructions too but, I didnโt need them. I watched a model specific video on YT so, I knew what I was in for. Super easy! All parts were great quality, fit exactly like they did from the factory and I have know doubt they are durable. This is also a great time to clean the inside of the drier and the exhaust vent tube.
V**E
Fits perfectly.
Itโs actually an OEM parts. First perfectly so I definitely recommend.
S**I
I freaking hate these appliance makers!!! DESIGNED TO FAIL.
The parts works great, but as soon as you open up the dryer, you see everything is cheaply made. It gets you mad! You pay a thousand or more for a "quality" product, and what you get is really flimsy sheet metal shell, medieval level of engineering, plus a fancy control panel. Like, you really want to ask them... "Have you ever heard of a thing called BALL BEARING or ROLLER BEARING?" If my power tools are made the way these pieces crap does, they will most likely blow up the second I power it on...
G**O
Dryer parts
Great price
M**R
Perfect fit
Perfect fit and really smooth, fits 100% on Maytag dryer. Great product
Y**U
Good
Only the belt is a little bit thinner than the OEM one. My customer has been using this belt for 2 years, no problem so far.
Trustpilot
1 week ago
1 month ago