SONOFF Zigbee Switch, SNZB-01P Wireless Push Button, Supports to Create Smart Scenes, Trigger the Connected Devices on eWelink APP with Three Control Options, SONOFF ZigBee Bridge Required, 1Pack

Integration/compatibility with HomeAssistant (Zigbee2MQTT) was simple. It's as simple as clicking the "Permit Join" button in Zigbee2MQTT and then powering the button on. The range on this seems to be pretty good. I had my Zigbee receiver in the basement with this button and a light on the second floor of my house. There was no issue with the connection. This is going to end up saving me frustration in the long run. My wife has a habit of leaving the closet lights on. Sometimes the two lights would be on for 8+ hours. They are on pull cords, so there was no good switch before. Creating automations in Home Assistant with this button was simple. A single press toggles the lights and starts a 2 minute timer. After 2 minutes, the lights shut off. A long press toggles the lights with no timer. I bought a second button for the living room. A single button toggles the closest light. A double press toggles the two further lights. A long press toggles all the lights in the room. The button has a solid 'click' when you press it. It feels solid and not cheaply made. I like the magnetic mount that comes with it. The battery is supposed to last a while. It would be better if it used a more common AA or AAA battery, but CR2477 batteries aren't too expensive.

Fun little device that works seamlessly with my SmartThings hub and app. No need for extra apps. It has three functions that can be mapped to any routines - single press, double press, and hold. This does introduce a slight delay however. I like that it's magnetic and sticks to the side of my washing machine easily, for turning my utility sink light on for 10 minutes (double click for 30, hold for indefinite).

Pretty confusing based on the marketing, but the button alone does not seem to work with the latest generation of Amazon Echo, even though Amazon Echo can work as a Zigbee device. The Echo simply does not seem to want to find the button, and that pretty much writes it off. Even after setting up the eWeLink skill and app, you can't add the button to the app without first having a Zigbee hub setup, and you can't add the Amazon Echo as a Zigbee hub in the eWeLink app. It's a frustrating circle of nonsense, but either way, I would avoid buying this if your goal is to have a button that can simply activate an Alexa routine. It's possible it works if you also buy a the SONOFF Zigbee hub, but now you have hubs on hubs and hubs, and it's all getting a bit silly. I look forward to the end of the format war for smart home things, because it's a pretty difficult market to navigate.

Love this zigbee button. Paired easily with Home Assistant and was super easy to program. I use it to turn on lights in the morning before I get out of bed. It is a great value for the money.

I use it with my Home Assistant and Alexa via Home Assistant. Functionally, it works great and does exactly what I need it to do. I have a smart light switch in my garage. The adjoining door from the house to the garage has a contact sensor. I have set it so that every time the door opens the light toggles. In general, my setup works fine. However, if someone is in the garage with the light on and another person opens the door, the light goes out. Now I have this button the overrides my setup and ignores the contact sensor and just keep the light on. The only thing I wish was the magnet in the button that attaches to the wall mount was a bit stronger. I sometimes brush my hand by the button and the button sometimes falls off.

Had to use Alexa to get a routine made for my Tuya setup and SmartLife. Once I figured that out I found the button clicks are firm but not too firm. One click on, two clicks off. The magnet mount came in handy and the 3M sticky tape was firm. It has made easy steps even easier with a few of these strategically placed. 5 stars if you have Alexa and trying to get these to work with a generic Zigbee 3.0 controller/gateway and the main app is SmartLife for your Tuya devices.

Easy to pair, works well. Using a combination HUE/Zigbee home setup through a Home Assist VM on my PC. Just send your ideas through your preferred AI and it'll write you YAML scripts that'll do whatever you need it do using these buttons. Different conditions for click on/off/hold.

Seems robust and works fine with Smartthings and a hub. Smartthings didn't accept the QR code, but as soon as the battery tab is pulled, the app sees it. Has three modes - tap, long press, double tap.

Un accessorio molto utile per comandare dispositivi e automazioni senza aggiungere altri interruttori cablati. È piccolo, discreto e tramite ZigBee risponde rapidamente ai comandi. Particolarmente interessante se utilizzato con Home Assistant, perché con le diverse tipologie di pressione si possono associare più azioni allo stesso pulsante. Pro: ZigBee, dimensioni molto compatte, più tipi di pressione, ottimo per scene e automazioni, nessun collegamento elettrico necessario. Contro: Per sfruttarlo realmente serve un coordinatore/hub ZigBee e la configurazione delle automazioni richiede qualche minuto. Rapporto qualità/prezzo: Ottimo. Costa relativamente poco e permette di creare moltissimi comandi personalizzati.

Good product, but I just received one not two

Doet wat het moet doen handig te bevestigen!!

Der Sonoff SNZB-01P ist für mich einer der zuverlässigsten Zigbee-Taster im Smart-Home-Bereich. Ich nutze ihn mit Zigbee2MQTT in Verbindung mit Home Assistant – die Einbindung war problemlos, wurde sofort erkannt und funktioniert seit Wochen absolut stabil. Die Reaktionszeit ist top – kein spürbares Delay zwischen Tastendruck und Aktion. Besonders gut gefällt mir, dass sowohl Einzel-, Doppel- als auch langer Tastendruck sauber erkannt werden. Damit lassen sich komplexe Automationen realisieren (z. B. Licht an/aus, Szenenwechsel, Rollosteuerung usw.). Die Verarbeitung ist hochwertig, die Taster haben einen klaren Druckpunkt. Der Batteriestand wird zuverlässig übermittelt und nach mehreren Wochen Nutzung ist der Verbrauch minimal. Ein weiterer Pluspunkt: Der Schalter lässt sich über die Rückseite magnetisch oder mit dem beiliegenden Klebepad flexibel befestigen. Ideal z. B. als zusätzlicher Funktaster neben bestehenden Lichtschaltern oder als mobiler Trigger. Fazit: Ein sehr durchdachter Zigbee-Button mit stabiler Firmware, ideal für Home Assistant-Nutzer, die Wert auf schnelle Reaktionszeiten und Flexibilität legen. Absolute Kaufempfehlung.

produit conforme à la description, le SONOFF SNZB-01P Interrupteur Sans Fil ZigBee 3.0, c est intégré parfaitement dans Home assistant pour commander une prise connecté