ANYCUBIC High Speed PLA Filament 1.75mm, Rapid PLA, 1KG, Bright White

The ANYCUBIC High-Speed 3D Printer Filament delivers exactly what it promises: outstanding performance at higher speeds without sacrificing print quality. This filament has quickly become a favorite for my rapid prototyping and production projects. Here's why it stands out: 1. Designed for High-Speed Printing I tested this filament at speeds of 150mm/s and above, and it handled beautifully. The extrusion remained consistent, with no skipping or under-extrusion, even during fast and complex prints. It’s perfect for printers optimized for speed. 2. Excellent Layer Adhesion Despite the rapid printing, layer adhesion is superb. The prints are strong, durable, and show no signs of delamination. This is a critical factor for structural parts and functional prototypes. 3. Smooth and Precise Finishes This filament produces clean, detailed prints even at high speeds. There’s minimal stringing or imperfections, and the surfaces come out smooth with crisp details. 4. Wide Material Compatibility The filament works seamlessly with most FDM printers, including my Anycubic Kobra 3. It maintains consistent performance across different nozzle sizes and heated beds. 5. Vibrant Colors and Quality Build The colors are bold and uniform, making the prints visually stunning. Additionally, the filament spool is tangle-free, ensuring hassle-free feeding throughout long print jobs. 6. Cost-Effective for High-Speed Printing Given its performance, this filament is reasonably priced, especially considering the time saved by printing faster. It’s an excellent value for anyone pushing the limits of their 3D printer. Pro Tip: For the best results, I recommend a nozzle temperature of 200-220°C and a bed temperature of 60°C. Pairing it with a fan speed of 50-75% ensures sharp details and reduces minor defects. Overall, the ANYCUBIC High-Speed PLA Filament is a game-changer for anyone looking to save time without compromising on quality. If you’re using a high-speed printer, this filament is a must-have. Highly recommended for hobbyists and professionals alike!

I am subscribed to this high speed pla because of how good it is. In the description it says thats its maximum is 500mms but I consistently print at 600mms with it no issues on my kobra 3v2. I have really dialed settings in and see near perfect quality at 600mms by simply only ptinting the very outer wall at a slower speed(250mms) which is half its max rated speed. Anycubic pla has always stuck to the textured plate that I have and is also inexpensive. I always keep my filament dry and at 45 degreesC when printing to sustain those speeds with no issues so i can't speak on moisture absorption but pla is know to be very forgiving when it comes to that so I dont think that would be an issue.

This is my go-to filament for my Bambu printer and works great as long as you keep it dry (with a filament dryer) and store it in a vacuum sealed bag when you are not going to use it for more than a week. Never had any problems with stringing, bed adhesion, or clogging when it is dry. I can confirm that the double pack marked “Gray & Gray” is in fact Texture Grey. Overall, Texture Grey is my favorite color as it is so universal and also takes paint well.

Horribly wound. Purchased since I have an Anycibic Kobra X and wanted to keep brand consistently but this is terrible. The black and white are fine but the red and blue are completely screwed. 5/26 - UPDATE - an Anycubic representative reached out about the issue and wanting to help remedy it. I truly appreciate the quick response and great customer service, so changing to 5 stars because that is very hard to find these days. Will text the replacements and update if needed

Printer: FLSUN SR - 200mm/sec (Past printers, Ender 3, Ender 3 Pro, Anet A8) I can't say enough about how well this filament flows and performs on my Super Racer. When I bought the printer, I couldn't find any high speed filament that would handle its top speed, which is slow compared to some of today's 3D Printers. I stumbled across the Anycubic High Speed and decided to give it a shot. It's performed great and quickly shot up to top speed for the SR. I've calibrated the e-steps for my extruder so that when I select the command to extrude 100mm of filament, that's what I get. From the manufacturer, it was extruding about 110-115mm. Once that was fixed, it's so easy to eliminate the elephant's foot artifact and get a great first layer adhesion. I've also been able to maintain great quality down to 84% flow for print in place pieces. Whether it's gears, hinges, or whatever, it's worked every time. So simple to break free. I've purchased this eight different times now, various colors, and my only complaint actually comes from the spool and not the filament. With cardboard spools, as you approach the center, allow the filament to tighten up so that it pulls my filament dryer over. For paper spools, I switch to a rolling spool holder. Plastic spools have been perfect every time. Also worth noting, color changes within the Anycubic High Speed are the easiest. I've yet to change a single setting just because of a color change, which is something I have had to do with other brands after a color change. The flow characteristics for this filament are so consistent once you've dialed it in.

First time buying this brand, and it will definitely be my last. The filament snaps very easily and unpredictably. It has already broken off inside my Bambu P1S five times. At first I thought it might be something with my printer, but I realized that random sections of this filament are extremely brittle and break with very little effort. Total waste of money. It’s going in the trash. I’m not taking apart my printer one more time because of bad filament.

On the positive side it prints without issue using both a Bambu X1C and a Snapmaker U1. It's a nice shade of grey and should be a pretty close match to the unpainted board game miniatures the printed objects are going to hold. On the down side after playing with nozzle temperatures and retract settings I've more or less given up on printing anything which has gaps between parts or multiple objects not being covered in angel hair. As nearly as I can figure out angel hairs are caused by either damp filament (PLA isn't terribly hygroscopig) or a need to tune temperature and retract settings. So this filament is either damp out of the box (I didn't dry it) or it's just stringy as my attempts to drop temperature and increase retraction at the nozzle haven't produced much difference in the output. This gets 4 stars because it's pretty darned cheap. Loses one for the angel hairs on everything.

Fast printing and no clogging. Printed a toy for grandson, came out looking great

Lässt sich perfekt am Kobra X drucken. Farbe wie erwartet

Muy bien empacado, buena calidad de producto

Das Material an sich ist völlig ok, aber über das ACE lässt sich das Material nicht wirklich drucken. Ich habe es mit dem Ace Pro versucht. Im Endeffekt musste ich doch nach dem Trocknen auf die externe Spindel ausweichen und einen kürzeren Schlauch verwenden. Dann kann man besser 'richtiges' TPU verwenden. Wirklich weich ist das Material nämlich nicht.

Me dejo sorprendido ca calidad del acabado y la fuerza de este material, se imprimo muy bien, muy recomendable

Utiliser dans les 30 minute après réception et sans temps de séchage, sur une kobra x. Le filament est directement reconnu par la kobra en le scannant a l endroit prévu pour, ensuite la machine nous demande d inséré le filament dans l ace2 et la magie sa imprime parfaitement bien. Pour les paramètres de tpu sur la kobra j' ai directement le paramètre ace2 Je précise quand même que ce tpu est relativement rigide . Génial !